I think I need to combine functions to allow me to automate data entry from a table from another worksheet. If the Name entered in column A on Exp Breakdown matches a name in column A of Salary Breakdown I cannot seem to write a function to scan the table in Salary breakdown and lookup the percentage that person is paid from a specific program number. I have attached a sample worksheet to hopefully make it easier to understand.
I am using the following formula to calulate the compounded rate of return for a series of monthly returns: {=(PRODUCT(1+(b1:b100)/100)-1)*100}
I would like to be able to integrate a VLOOKUP function into the above formula so that it looks at the dates in column A and then apply the PRODUCT function above to the return values in column B that fall between start and end dates specified in cells C1 and D1.
This was a snap in Lotus. Unfortunately, the VLOOKUP and HLOOKUP formulas don't translate to Excel on conversion. I need to estimate the weight of reinforcing steel in concrete based on 7 different sizes of rebar and spacing of the bar between 1" and 24".
I have created a matrix(lookup table) with the bar spacing listed in decimal equivilents in feet on the top row.Inthe row below, I have numbered the columns from 1 to 24. the next row is blank. Along the left side of the matrix, I have listed the bar sizes 3 thru 10. Within the table I have listed all the bar weights/SF of concrete. IE if the slab has 1 mat of #5 rebar spaced 6" oc. If you look in row 7, under column 6, the weight of weight of the bar in that sf of concrete is found. In the part of the worksheet where the caculations are performed set up as follows:.....
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
I am currently using this Formula to Search a table on sheet 2 (Tabelle2) and copy the date in the relevent cell (Cells) into the correct cell on Sheet 1 (Master Sheet).
[Code] ..........
Used in cells E10:AZ30 and E33:AZ46
This works perfectly and is the formula behind all relevent cells in Sheet 1.
I would like to keep this but to add that it also copies the background color of the cell in Sheet 2 to the cell in sheet 1.
If i can Bring this Formula into VBA and add the color changing part, It must only work on the cells listed above..
Currently I am using a VLOOKUP to return a value, and I am trying to apply a calculation formula to the returned value. Below are both the VLOOKUP formula, and the calculation formula. Each of the formulas works well while in separate cells, however am I able to combine the two formulas into one cell?
I get new worksheets on a regular basis which are of the same format (same columns with headers) and I have to perform both vlookups and sumifs on them. Their are about 12 different tabs I perform the vlookup on based a vendor name in A2 and its corresponding tab. I am tired of typing the same thing over and over again.
What I'd like to write is a Control Panel with all the equations so I can just copy/paste them in when I get a new sheet.
How can I write a vlookup which would search for the value which is one cell to the right of where I put the formula in?
Similar to: =vlookup(current cell over one, 'vendor1sheet'!A:C,3,0).
I would then want to copy it down the worksheet. Currently type in column E everytime I get a new sheet: =VLOOKUP(F2,'Vendor1'!A:C,3,0)
The catch
Column A has the vendor name, there are about 12 vendors, each with a different tab with related data which I am searching through.
Ultimately, I'd like to have an equation that would do the vlookup (and sumif) as described above and also use the vendor name in column A to look on a particular tab.
Something like: =vlookup(one cell to the right,'VendorTabFromVendorNameInColumnA'!A:C,3,0)
I was going to use nested if statements on a control panel sheet with a column for the vendor name and a column for the vlookupformula and than paste a single formula all the way down column E:
In column E, every row: If(A2=vendor1, 'controlpanel'!vendor1equation), if(A2=vendor2, 'controlpanel'!vendor2equation), etc.
Again, the vlookups would all check for one cell to the right of where this nested if statement was (located in column E, looking in F).
I have a VLOOKUP formula in a cell that refers to another cell that has a formula in it.
When I type the actual numerical result (rather than the formula) in the formula cell, the vlookup works. When the formula (that equals the same number) is in there, the vlookup cell is returning #n/a.
I have 2 formulas which I want to combine into a single formula.
Both are correct and work in isolation, but when I attempt to combine them, the syntax is incorrect.
Here is the first:
=IF($C$31="YES","YES","NO")
The formula is dependent on a single user selection from a drop down list. If the user selects YES, the cell in which the formula resides displays YES, otherwise NO.Here is the second:
I am creating an electronic timesheet. I have created drop downs for times of the day, which then automatically calculates the number of hours worked based on the times selected. The trouble I am having is, I also need to incorporate "Vacation", "Sick Day", etc into the drop down box where the time of day is located.
The sheet works great until someone selects a non-time related answer, such as "Vacation". When this option is selected, the cell that is supposed to contain the number of hours worked says #VALUE! when I, in fact, need it to list a value of 0 for the number of hours worked. Any idea on how to combine my formula =(D6-D5)*24+(D8-D7)*24+(D10-D9)*24 with an IF statement that will automatically assign a value of 0 if a text answer is selected from the drop down?
i am trying to achieve old products on a database that we no longer have any stock of and we haven't sold since a specific date. I am having probems with an "=if(and" formula. At least i thin it is an equals if and formula that i need.
Basically i need to say the following:
=if(Stock quantity column = 0 and the date field is <= 31/12/2005 then "Delete" or "Keep")
I need help with a formula so that I can create a single chart or (more likely) multiple charts for each of the choices in column C.
Attached is a sample of my spreadsheet. I want to be able to break out each of the "Br#"(A) associated with the "BUM"(C) and graph each of the choices in column D (Run Time).
I am sure I can create the chart I need once I get the formula created to pull the data I am trying to combine. I hope that I have explained this well enough.
I am trying to create a lookup formula where the cell value to match has a formula behind it.
For example: =INDEX(AR7:AR371,MATCH(G28,AE7:AE371,0))
The trouble I'm having is that the value in G28 is derived from a formula and the Index Match formula then gives a #N/A result. If I change the value in G28 (a date) manually, so directly enter a date, the Index Match formula works ok.
Is there any way of getting the Index Match formula to work, or Vlookup would also do although that at the moment that has the same problem with G28 having a formula behind it.
I have a VLOOKUP formula, so when the cell above (C5) has a value, it returns the value from a defined list. Simple so far and it works great when I manually input the value in the cell (C5).
The problem occurs when I change C5 to contain an AVERAGE formula? Any ideas why it will only work when there is a plain old value in there, but not a formula?
I am trying to reference a named cell in a VLOOKUP formula as the table_array parameter.
The Named Cell "Input1" contains a table array definition of '[Test.xls]Sheet1'!$H$10:$J$100
When I try VLOOKUP($D3,Input1,3,0) - This returns #N/A as a result.
When I try VLOOKUP($D3,INDIRECT(Input1),3,0) - This returns a #REF error.
When I copy and past the contents of the Input1 named cell directly into the VLOOKUP formula, it works so I know the array reference is valid.
I am not proficient in VBA so I would like to accomplish this using basic Excel formulas if possible. how I can reference the named cell and have the cell value returned in the VLOOKUP function?
I have created a vlookup and it shows as a formula not as data. I can do 'text to columns' to correct it, but I need to drag this vlookup to lots of different cells, then change it slightly in each one.
Every time I make a change, it reverts to the formula and I have to do 'text to columns' again.
I'm currently using the following formula to return either a "PAST DUE" or "DUE" value in a particular cell based on the date entered in the cell in the previous column.
However, if the reference cell is blank the formula automatically triggers to put in "PAST DUE" as the value. I would like to modify this formula so if the reference cell is blank that this cell will also remain blank. I've tried a few different options, but I'm getting an "too many arguments" error on what I've tried.
I have problem with a spreadsheet that I am trying to create.
I have a large sheet of data which is dumped in from another program. This contains our deliveries and orders etc.
Now for planning purposes, I would like to see how much of each item I have on order.
I can use VLOOKUP, but that will only give me the amount for the first order it encounters. But not the 3rd, 4th etc. I could use SUMIF but I need the dates as well. After doing some searching I think I have found a way of doing this: I can get the first easier enough:
=VLOOKUP(D$11,'purchase order'!$A$1:$K$6000,5,FALSE), this gives the first order than the another =VLOOKUP(D11,'purchase order'!$A$1:$K$6000,11,FALSE) for its date.
For the second column to check any other orders I thought I could find the cell referance for the first SEARCH: which is
A108: ="A"&MATCH(D11,'purchase order'!A:A,0).
Is there any way of using this Reference to start a new VLOOKUP. So the Lookup Range starts at this reference?? To make things harder it is on another sheet.
I have a spreadsheet with a VLOOKUP formula that I have to send to a customer weekly. They are required to type a code in column E of what they invoice, and it pulls the rate into column G based on a rate table I have. The formula is: VLOOKUP(E2,Rates!A:B,2,0)
When I made the spreadsheet, the formula worked perfect. But when they type their codes in and send it back to me, it's messed up. All of the codes they've typed in do pull the correct rate. However, if I try to go to column E and type a different code on top of what they typed (a code that IS IN the rate table), it will tell me: "The value you entered is not valid. The user has restricted values that can be entered into this cell".
If I create a new tab and mimic the exact formula and columns as I am trying to work with, it works perfectly. But for some reason, once they've typed their data into my spreadsheet, something messes up even though the formula is perfect, dragged down, etc. All columns are formatted as text. And the range in the rate table is correct as well. When I try to mimic the formula in the other tab, if I click a cell in column E, there is a drop down list there showing all the available codes from my rate table to choose from. But on the spreadsheet that is messed up has no drop down list on the cells.
I have spread sheet with food items listed. there are subcategories [i.e. bread items] followed by a list of items. then another category, and so on. i have a vlookup formula in the "non category merged cells' "BAKERY" is merged to create headerlike divisions. is there a way to keep the headers and copy the vlookup formula "through" the headers and leave the headers the way they are? i'm not very optimistic but you guys rule!
Paper123456dfssdfsdf456145sdfsddfsdf56465sdfdssdfsdfBakery34566/2 LB sdfsdf566/2 LB sdfsdf4566/30 OZ dsf
what I would like to do is view a cell result in my userform with out deleting my formula
It works perfect from the excel side but I just cant get it right from the user form side
Ok so cell D6 contains a vlookup formula. I want the vlookup result to appear in my userform. I can get this to work but it overrides the vlookup formula with the result. This means that when I go to use it again it just shows the same result.This is what I have:
Cell D8 has a Combobox with a list of names to select from
this is the formula in cell D6 =VLOOKUP(D8,B107:I754,2,FALSE) This retrieves the selected customers account number from the combobox. I need my userform to display the account number with out erasing the formulas because I will need to search for more account numbers after.
I have named the textbox in my userform Customeraccountb
