I have created a vlookup and it shows as a formula not as data. I can do 'text to columns' to correct it, but I need to drag this vlookup to lots of different cells, then change it slightly in each one.
Every time I make a change, it reverts to the formula and I have to do 'text to columns' again.
I am trying to create a basic invoice spreadsheet.
On worksheet 1, I have days of the month A4 to A35. Columns B, C, D, E are headed.
Every hour of work I would enter a " 1 " in the correct cell for the day. For example, 1 hour, every segment of the day, I would enter "1" in cells Bx, Cx, Dx and Ex. This continues for the month;
On a 2nd worksheet, this is neatened up, and I have added formulas to work out the cost and type of call;
On the third worksheet, I want to display roughly the same, however when there has been no work on the day (ie the date displays "None" and the adjacent cells show: blank, blank, blank, blank, £0.00), I want it to skip the cell and display the next date which has data to show (ie a date). The data on the adjacent cells needs match with the date (in the same way as physically deleting a 'non worked' whole row).
This then on the invoice worksheet would look neat and display only the days actually worked.
What formula(s) could I use to do this.
I am getting 0 or 12:00 AM when I format cell as time and put formula.
I working on timesheet using this formula (=SUMIF('2'!G4,"="&TODAY(),'2'!E17)). If date in G4 on sheet2 match with todays/current date then copy data in cell E17 to sheet3(b11).
G4 = todays date
E17 = time eg. 2:25 AM ( I have to format destination cell as time because E17 has time value
Formula works fine but when there is no data in E17 or E17 is blank then my destination cell shows 12:00 AM.
Why is it that when I edit some cell's formulas and press enter the result is not the changed formula but the formula itself complete with the '=' sign infront of the fuormula. The work around for me is to cut the formula and paste it into a new cell then drag the old cell over the previous one I tried to edit.
View 3 Replies View RelatedWhen I first started using excell I was relatively good at it, however a few changes were made. The main one being for excell 2002 was the collumns were not by letter. A minor problem that I managed to get past. However the next was a function issue. Before I remembered a way to total rows with a simple function like =b3*c3, which worked for the first one. Then, from that point, I could copy that formula and paste it to all of the cells in the collum in which the forumula changed for individual cells to =b4*c4, =b5*c5, etc.
My questions are simple. Is there a way that I can do this on Excell 2002 without having to do it on a cell by cell basis, and is there a way to change collumns back to letters.
I've attached the spreadsheet in which I want to figure this out on. The goal, is to total price and quantities sold into the totals section without doing it on a cell by cell basis.
I have a spreadsheet with a VLOOKUP formula that I have to send to a customer weekly. They are required to type a code in column E of what they invoice, and it pulls the rate into column G based on a rate table I have. The formula is: VLOOKUP(E2,Rates!A:B,2,0)
When I made the spreadsheet, the formula worked perfect. But when they type their codes in and send it back to me, it's messed up. All of the codes they've typed in do pull the correct rate. However, if I try to go to column E and type a different code on top of what they typed (a code that IS IN the rate table), it will tell me: "The value you entered is not valid. The user has restricted values that can be entered into this cell".
If I create a new tab and mimic the exact formula and columns as I am trying to work with, it works perfectly. But for some reason, once they've typed their data into my spreadsheet, something messes up even though the formula is perfect, dragged down, etc. All columns are formatted as text. And the range in the rate table is correct as well. When I try to mimic the formula in the other tab, if I click a cell in column E, there is a drop down list there showing all the available codes from my rate table to choose from. But on the spreadsheet that is messed up has no drop down list on the cells.
got this quite complciated formula.
any of the cells specified can be blank at start of spreadsheet
is there a way to hide the DIV/0 error from appearing
this is the formula:
=((((((SUM(C11:C14)*(100%-R2)+(SUM(ThroughputFormulas!C33:C36)*R2)*(L2/30))/1000)*N2)*3600)*P2))/(SUM(C39:C45))/1024/8
I already have a conditional format which is working OK. I would like to put a formula in the cell so it shows a % so currently it would be 100% as there is 3 cells below showing 3 greens.
Alternativily each colour is worth a value - Green = 1, Amber = 2, Red = 3. So Cell I3 would show 3.
Hi i have the following SUMPRODUCT formula which works as required, but when i clear the raw data and apply new raw data and apply macro that sorts my data, then all the ranges in the formula shows #REF!
=SUMPRODUCT((Raw_Data!C6:C5000=Summary!$B10)*(Raw_Data!A6:A5000=Summary!C$8)*(Raw_Data!E6:E5000>2))
I am facing an issue related to IF formula. It does show the correct result in one and another cell, but in a few others - doesn't.
This is strange since all variables are correct, and parameters are the same for every cell. And, in theory every cell should show the right answer.
In addition, the result doesn't change even when changing variables in cells that are dependants to cell where IF is located.
Concerning the formula itself. Variables are as such:
- different container types (20, 40, 40rf, 45cs, 45rf, 45)
- different weight limitations per container type (e.g. 20 container max weight 26t)
- using IF(OR(AND(....
- if any of the conditions met (e.g. 20 container < 26t ) then VLOOKUP for the rate from data based on the place name.
- if non of conditions met, then show "Overweight cargo"
I have following formula:
Why does this formula show result as "FALSE"?
If cell B56 is empty, then I need a result of "". i.e. blank result, but it shows FALSE word.
IF(LEFT(B56,2)="on",
then you go straight to the TRUE nested IFs
IF(LEFT(B56,2)="on",
IF(LEFT(B$52,3)="Pla",RIGHT(Table!AN4,2)&"% Discount",
IF(LEFT(B$52,3)="Gol",RIGHT(Table!AO4,2)&"% Discount",
IF(LEFT(B$52,3)="Sil",RIGHT(Table!AP4,2)&"% Discount",""))), "need something here" )
so to get ""
IF(LEFT(B56,2)="on",IF(LEFT(B$52,3)="Pla",RIGHT(Table!AN4,2)&"% Discount",IF(LEFT(B$52,3)="Gol",
RIGHT(Table!AO4,2)&"% Discount",IF(LEFT(B$52,3)="Sil",RIGHT(Table!AP4,2)&"% Discount",""))), "" )
I have an excel file which contains a full consolidated list of data (Master Tracker). I am now creating a new tracker and what i want to happen is for it to show the list of names from the Master Tracker which exceeded the current date "now()" and the status is still pending.
FYI: The master tracker and New tracker is different excel files Here is an example:
Master Tracker:
client
Candidate
Case Date
[Code]....
On cell K7, i have this formula:
=IF(ISERROR(I7-J7),"",I7-J7)
On cell L7 i have this formula:
=IF(ISERROR(RANK(K7,$K$7:$K$29,0)),"",(RANK(K7,$K$7:$K$29,0)))
The issue is that in cell K7 a dash (-) shows up and ranks this as the number one, even when i have no data in I7 and J7.
MTD Conv
Conv Goal
B/W Goal
RK
-
1
29.3
31
(1.70)
12
21.8
25.0
(3.20)
15
I am linking two worksheets together. Formulas work fine except when I close the source sheet, it turnes into #REF error. I saw in one of the posts that you can not use INDIRECT formula on closed workbooks (INDIRECT is a part of the formula in my sheet) and downloaded the changingExternal. zip file as directed. Although, after staring at it for a while, I realized that I had no idea as to what was going on in there.
View 3 Replies View RelatedI'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
I trying to write a conditional formula to test data in a cell to see where it falls between certain values, and depending on the data in the cell, will display a message in another cell showing what level has been attained. It's a long formula and I may not have the syntax correct. Can someone look at this and tell me where I have went wrong? All I get in the target cell is "################".
Here is the formula:
Try this formula. Array formulas will have curly brackets {} emcompassing the ENTIRE formula. You do not add these, you Enter the formula with Ctrl+Shift+Enter and Excel will add them (details: Array formulas). Many more Excel Formulas
=IF(c13<1600,"Not at prize level yet",IF(AND(c13>=1600,c13<=1999.99),"You have reached level 1",IF(AND(c13>1999.99,c13<=2499.99),"You have reached level 2",IF(AND(c13>2499.99,c13<=2999.99),You have reached level 3,IF(AND(c13>3000,c13<=3499.99),"You have reached level level 4",IF(c13>3500,"You have reached the top level!!"))))))
I'm using Excel 2010.
A formula I am using is outputting "0" instead of the expected value. Upon evaluating the formula I realized that this was because some of the values - years, in this case - had quotes around them while others did not. Please see the image below for the screenshot of the evaluation.
These values - the years - are being evaluated in the following formula.
Code:
=SUM(
IF(inventory!$F$3:$R$3=$A3,
IF(inventory!$B$4:$B$56=$G$1,
IF(inventory!$D$4:$D$56=$G$2,
inventory!$F$4:$R$56))))
This formula references the following sheet (an excerpt from that sheet). You can also see the formulas found in the cells causing the problem.
*ABC5212/20/20102010Adjustments53*20112011543/17/20112011Carwen Printers559/9/20112011Adjustments569/9/20112011Copeland Printing
Spreadsheet FormulasCellFormulaB52=IF(A52="",C52,YEAR(A52))B53=IF(A53="",C53,YEAR(A53))
B54=IF(A54="",C54,YEAR(A54))B55=IF(A55="",C55,YEAR(A55))B56=IF(A56="",C56,YEAR(A56))
I suspect that the problem is being caused by the output of the formula in these cells. If I simply type in "2011" instead of using the formula in B52:B56, then the first formula in the code section above does not have a problem.
How I can reconcile this?
I am trying to track inventory over 160 days in a spreadsheet. Every week I update a table that shows the number of skus and dollar amount that are over 160 days in a table. I have a ton of formulas that will automatically populate once I put in the new weekly data on a different spreadsheet. I want to track the weekly data so what I would really like to be able to do is paste the actual numbers and not the formulas into another excel spreadsheet so I can track the progress over time. Is there a way to just paste the actual numerical number instead of the formula itself?
View 2 Replies View RelatedBut the formula seems to be working properly.
I've got ALOT of parentheses, 5 nested IFs, 5 ANDs, 4 ORs. The ANDs and ORs are within the IFs.
While editing the formula, I can, at times, achieve the condition where the cell references become color-coded. Or at least some of them do. But, when I get to this point, I'm usually at a spot where I can see the formula isn't right.
I'm confused. What does it mean when my text is all red when I go to edit a formula? Did I hit some limit? Again, I don't get error messages and the formula seems to work properly.
I am working on a spreadsheet which has a column which shows square footages (Column AE) and I also have a column which shows costs (Column Y).
What I would like to do is to bracket these footages in to 6 bands (0 - 5000, 5000 - 10000, 10000 - 15000, 15000 - 20000, 20000 - 25000, 25000+) and then average the costs within a particular band.
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
View 4 Replies View RelatedI am looking for a way to show the character location number of a text file, possibly in the first row or a macro that I can run at any given location that will give me the location # I am currently viewing.
Currently, when I open the file I can see the character # at the opening screen (see attached file) but they disappear when it actually converts. I would like to be able to keep the character location ruler once the file is opened in Excel so I don't have to manually count.
I have copied my first sheet into multiple sheets. Now when I enter data in one it shows up in all of them. How do I stop this from happening? I have cleared out any content in them and the formula bar is blank in every line.
View 3 Replies View RelatedSee attached file. I have managed to work out how to update a chart automatically when a new row of data is added. However is it possible to tweak the formulas I am currently using so that it will only include 12 months previous.
For example if you add Jan in to row 26 the chart will show Feb-Jan data (Row 15-26).
Book1.xls‎
I'm working on a function that gets its values from a Data Validation List.
My problem is that I want the function to return a value when an item in the list is selected and another if the user did not make a selection... just a basic if....then....else ... but the cell where I call this function shows the #VALUE! error while no item in the list is selected.
I call the function like this:
=myFunction(RC[-5], RC[-2])
where RC[-5] is the Data Validation List and RC[-2] is a cell where the user should enter a number
why I'm getting the #VALUE! error instead of my message
The function basically looks like this:
I am currently using this Formula to Search a table on sheet 2 (Tabelle2) and copy the date in the relevent cell (Cells) into the correct cell on Sheet 1 (Master Sheet).
[Code] ..........
Used in cells E10:AZ30 and E33:AZ46
This works perfectly and is the formula behind all relevent cells in Sheet 1.
I would like to keep this but to add that it also copies the background color of the cell in Sheet 2 to the cell in sheet 1.
If i can Bring this Formula into VBA and add the color changing part, It must only work on the cells listed above..
I require is on combobox selection to bring in the data "type" from collumn ag and put it in collumn "c",i then want to get rest of data from the row but get me started I will try and do the other data,do not know how to do formulas ,started first with userforms and would now like to learn formulas
View 5 Replies View RelatedI have 2 sheets, lets say SheetA1 and SheetA2. I am using Vlookup to serial number & getting data from SheetA1 to SheetA2. But I want to modifty the data. If i modify the data in SheetA2 that modification should relect in SheetA1. Is it possible...
View 5 Replies View RelatedI want a macro to show a message with a content in the cell B3.
For EG: "Rec as of 'B3' is created"
This has to be the message and 'B3' has to be the content in the cell B3.
I tried doing it but i am unable to show the content in B3 in the message.
Currently I am using a VLOOKUP to return a value, and I am trying to apply a calculation formula to the returned value. Below are both the VLOOKUP formula, and the calculation formula. Each of the formulas works well while in separate cells, however am I able to combine the two formulas into one cell?
Formula1.
=VLOOKUP($G20,'P&L FEED'!$C$2:$K$100,2,FALSE)
Formula2.
=($D20/$I20)*(-$H20)
So first I am using the VLOOKUP to return a value from a range, and that returned value I want to apply the second formula to.
Is it possible to join both formulas into one cell? IF so, how?
