If it can not locate the correct responce I want it the formula cell to be blank. How do I adjust my formula to do this?
This is the forumal I am currently using
=VLOOKUP(A26,Subs!A:F,5,0)
I have also tried this one as well
=IF(ISNA(VLOOKUP(A6,Subs!A:E,5,0))+(VLOOKUP(A6,Subs!A:E,5,0)=""),"",VLOOKUP(A6,Subs!A:E,5,0))
I am trying to trigger a formula if a cell (B2) is populated (with anything) but if it is blank for the destination cell to remain blank.
The formula I am trying to trigger is =IF(G18=0,100,100-(100/(1+H18))).
I am trying to find a formula for a vlookup that will check one cell for any value but if that cell has no entry then it will check a different cell to return the value how do i do this?
TEAMCSS Wetherill ParkCT NAME
above is where i need it to look CSS wetherill Park is cell C1 the cell that has no entry is H1, both of these cells have validation lists in them,
OS windows XP excel 2007
I have the following Vlookup formula:
=VLOOKUP(G3,'Calculation for September 07'!C7:E1975,2,FALSE)
The formula is returning #N/A, but I see the lookup value in the table array.
What do I need to add to the formula to have the lookup value recognized?
I'm currently using the following formula to return either a "PAST DUE" or "DUE" value in a particular cell based on the date entered in the cell in the previous column.
=IF(AND(TODAY()>=BG43+5,TODAY()=BG43+10,"PAST DUE",""))
However, if the reference cell is blank the formula automatically triggers to put in "PAST DUE" as the value. I would like to modify this formula so if the reference cell is blank that this cell will also remain blank. I've tried a few different options, but I'm getting an "too many arguments" error on what I've tried.
I'm linking one sheet in a workbook to another. The formula is simple,
='Link 1'!E1
If there is data in the cell, it replicates it which is what I'm after. However if there is no data in the cell it returns a "0", not what I want at all.
I have a current formula using SUM formulas obviously in the answer cell the answer is returning 0 due to no data inputed, how do i make the cell show empty.
eg. =SUM(A1*A3) returns answer 0 need cell to be blank.
view the graph below:
A
B
1
EXTENSION 101
2
INBOUND TALK TIME
55M19S
3
OUTBOUND TALK TIME
1H22M13S
[code].....
I am trying to create a formula that will act like a vlookup but will return a different row. In other words, On page two I need to write a formula that says: In column 1 if you see "Extension 101" return column 2 of the row right beneath it, so on and so forth. So page two should return a mirror of what page one says, the difference is I would like people to type in "Extension 101" in a cell and it would return all the date.
A
B
1
EXTENSION 101
2
INBOUND TALK TIME
55M19S
[code].....
Cell A1 would be typed in//Cell A2-A4 would be static//Cell B2-B4 would return these numbers based on info from A1.
Cell A1 would always be unique in column A (on both pages).
Referenced cells returning zeros: can these be made blank or string data?
But why I still get the value 0 instead of blank cell when I press ctrl+shift+enter?
My formula = IF(U15="Bank", PROPER(E15),"")
and E15 = VLOOKUP(B15,'Customer Data'!$D$6:$K$100,3,FALSE)
I have a sheet which uses a vlookup to find the data on a large sheet. normally to get the cell reference of the data i would use cell("address",......
However this appears not to work with a vlookup.
I have a list of airport codes and I need to look up these 2 digit codes and find the relevant airport and country.
For some reason when I use the lookup function it is finding the correct lookup value but returning the column cell in the previous row.
My vlookup works.
My IF(ISNA works.
Now I just need to incorporate a formula for if is blank. Not sure where to incorporate it or how.
=IF(ISNA(VLOOKUP(F2,Contacts!H:J,3,FALSE)),"Unknown",VLOOKUP(F2,Contacts!H:J,3,FALSE))
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
is there anyway to have a vlookup formula display a blank cell instead of #N/A if the value it was looking for is not found. For example the first spreadsheet contains the persons name say Bob, the 2nd spreadsheet that the vlookup formula is searching does not contain the name Bob right now excel shows #N/A but what I want it to show is a blank cell. I've tried conditional formating to just white out the text if #N/A appears but can't seem to get that to work.
View 7 Replies View RelatedI have a Vlookup, it returns a number, and when it doesn't find a match it returns N/A, and when it does return a match and the return value cell is blank, it returns 0. Is there any way I can have this so when it doesn't find a match, it returns a blank cell, and when it finds a match and there is no value in the return cell, it returns a blank cell as well, rather than 0?
View 6 Replies View RelatedThe following formula: =IF(ISNA(VLOOKUP(C11,$D$139:$E$149,2,FALSE)),"",VLOOKUP(C11,$D$139:$E$149,2,FALSE)) (located in cell D11) looks in cell C11 Baseball Players Shirt Numbers then looks in the range $D$139:$E$149 to find the Players Name and place the Players Name in cell D11, but in this case cell D11 is blank. The table ($D$139:$E$149) is laid-out as follows; no headers, Players Names are in column 1 (Column D) and Baseball Players Shirt Numbers are in column 2 (Column E). The Baseball Players Shirt Numbers are formatted General in both the table and in cell C11. I can't figure out why cell D11 returns a blsnk answer?
View 9 Replies View RelatedAll the answers I can find for this address either the auto-calculation setting or formatting the cell as a number. I am using this same formula in a bunch of cells to calculate totals: =SUM(E12:E17). It works find all over the sheet, except in one box. There is no difference in formatting or data type or anything.
Not working: notworkingexcel.png
Working: workexcel.png
The numbers being summed from the cells above the one in question are referenced from another sheet if that is relevant.
I am wondering if there is a way to return a cell reference by having excel
look at a table with certain parameters. For instance...
If there were a table with repeated dates such as:
Feb 12 1500 1530
Feb 12 1745 1750
Feb 13 1215 1245
Feb 13 1610 1700
Feb 13 1850 1900
Feb 14 1050 1140
Is there a way to return the cell number (ie A6) for the first instance of
Feb 14?
I would like to have the answer to a formula, say in cell G6, to show up in say G5. I notice in my college coarses, doing our homework through excel, the solutions are always in a cell around the entry cell.
View 9 Replies View RelatedI am trying to use vlookup so that when each site name is selected the relevant comments for that site are displayed.
I have a formula that is working, but it displays "0" if there is nothing in the cell. How do i get it to display a blank cell if thre is nothing in the reference cell.
this is the formula that i am using:
=IF($C$4="", "", IF($C$4="No Match", "", (VLOOKUP($C$4,Comments!$A$2:$U$295, 5,0))))
The site name appears in C4, and is selected from another sheet in the workbook.
I have a normal VLOOKUP of this loookup range:
A 1
B 2
C 3
D 4
=VLOOKUP(T14,U6:V9,2,TRUE)
If the value in T14 is in the lookup range, I get the expected value returned. If the value exceeds the vlaues in the lookup range (e.g. I enter "E"), I get the last value in the range (4). How do I get it to return a blank cell if the entry in T14 is not found?
I have a table in columns A-D. I am trying to perform a vlookup to return the first non-blank in columns B-D based on the lookup value in column A. Columns F-I are what I am looking for the formula to do. I think I am close with the following array formula but not quite there.
Excel 2010LMN12#N/A3Sheet1Array FormulasCellFormulaM2{=INDEX($B$2:$D$9,MATCH($F$2,$A$2:$A$9,FALSE),
MATCH(TRUE,INDEX(INDEX($B$2:$D$9,MATCH($F$2,$A$2:$A$9,FALSE),0)<>"",),FALSE))}Entered with Ctrl+Shift+Enter.
If entered correctly, Excel will surround with curly braces {}.
Note: Do not try and enter the {} manually yourself
Excel 2010ABCDEFGHIJKL1PFQPFQ212341234CRWEWS312343456
WETXDR41234CR5123461234WE712348123491234WS1034562)
What I want it to return, vlookup of first non-blank
113456WE123456DR133456143456TX153456163456173456183456191)
What table looks like20Sheet1
Possible to have two spreadsheets and then perform the following tasks
1. Check If the cell in column I from cell I4 and the spreadsheet varies in length is blank and if it is - see item 2
2. The data equals certain values i.e. CDE or CDE - QUO or CDE - PRO - see item 3
3. Perfom a VLOOKUP to another spreadsheet
If the routine stops at any of the items then move to the next cell
Data is on spreadsheet - Allocations.xls
Vlookup is performed on this spreadsheet - 001 - Allocations - Blocks
The Vlookup for example is: =VLOOKUP(A5,'[001 - Allocations - Blocks.xls]CurrentDayAll'!$1:$65536.9,FALSE)
The formula should take the info from validation lists in R13 & S13, and match them up in F3:O3 (T1Q2) & C6:C15 (T2Q2) and return the data in the intersecting cell into R9 (Where the formula is kept). In this instance, it should find 1 at I3 and the 4 at C15 and return NN to box R9.
I need to format cell D1 to have the fill color be red if any cell in D2:D21 is blank. I've tried
=VLOOKUP("", $D$2:$D$21, 1, FALSE) but that returns #N/A (there is one blank cell in the range at the moment).
I really don't want to use =OR($D$2="", $D$3="", ...$D$21="") if I can avoid it.
Below formula matches two criteria
=SUMPRODUCT(('[Value.xlsx]test!$B$5:$B$50=$B5)*('[Value.xlsx]test'!$C$5:$C$50=$C5)*('[Value,xlsx]test'!D$5:D$50)).
What it does is:
Matching B5 value in range B5:B10 of tab "test" in worksheet "Value"
Matching C5 value in range C5:C10 of tab "test" in worksheet "Value"
AND capturing the matching value in range D5:D50.
The problem is that i am getting 0 if the matching value is a blank or 0.
I want the formula to return nothing (i.e. blank) when the matching value is blank and 0 only when the matching value is actually 0.
The below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
Code:
=IF(MONTH(TODAY())>MONTH('Input Page'!B30),YEAR(TODAY())-YEAR('Input Page'!B30), IF(AND(MONTH(TODAY())=MONTH('Input Page'!B30),DAY(TODAY())>=DAY('Input Page'!B30)),
YEAR(TODAY())-YEAR('Input Page'!B30),(YEAR(TODAY())-YEAR('Input Page'!B30))-1))
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
[URL] ...........
I am using the following formula to return an "F" in the cell. If there is no "F" it just returns "#N/A". Is it possible to have the cell blank instead of the #N/A? If so how do I do it?
=INDEX(E1:E99,MATCH(1,(A1:A99=Selections!J5)*(E1:E99="F"),0))
and then ctrl + shift + enter
