I have found this code that, with changes, I can make work with the cells and columns I am using. What I cannot see is how to make more than one cell change colour rather than just the cell in column J.
How can I change the code below to change several cells in the row? I will be using cells in columns A:F.
Data will be entered into the rows from A2 to E2, in F2 a vlookup will enter one of the values, "High", "Medium" etc.
Each of these values has a colour assigned. The code below, with alterations, will be able to colour the cell in F2 depending on which value is entered. I need the whole row from A2 to F2 to be coloured.
Code: Private Sub Worksheet_Change(ByVal Target As Range)
Dim ChangedRange As Range Dim r As Long, iCol As Long
Set ChangedRange = Intersect(Target, Columns("F:H"))
Would anyone have a script for something like this?
I'm looking at range c5:c1200
Starting at C5
If the first 2 digits in that number start with 01 then I want the formula to be in G5 = F5*12
if the first 2 digits are 03 then I want G5 = F5*24
I have several of these if statement to put in However I need it to check the entire range as well because the formula may be different in each cell (G)?
I am creating on the fly an array (2 columns) in which the one row cell is mathematically derived from its neighbor (A left-hand cell). However, when the mathematically derived product exceeds a value, the row neighbor changes to another constant until its neighbor's product exceeds another value, etc. Can I create such an array without resorting to VBA?
I would like to have vlookup formua. And I would like the sheet for the table array section be linked to a cell value. So in my workbook this is my vlookup formula:
=VLOOKUP(B2,sheet1!B2:C8,2,FALSE)
I would like to to be something like =VLOOKUP(B2,(=b3)!B2:C8,2,FALSE). This way I can change the value in B3 and the vlookup formula will look for values in a different sheet as opposed to the one I originally designated in the formula.
I am trying to put together a report tracking sheet, ie I have different test that take a different length of time to return to the office and I want to be able to see when a test should be back from the lab,ie:
A blood sample takes 1 day, a urine sample takes 3 days.
I need a formula that basically says that if the data in cell A1 = Blood, (and I have the test date in cell A2) then the data in cell A3 should says A1=Blood, A3=A2+1 to give me the test due date
I found the following formula in one of the other posts;
=IF(E5="BLOOD",G5+1,IF(E5="URINE",G5+3,0))
The problem that this will only work with two tests and I have more than two tests, I have fourteen and each takes a different length of time to process.
The formula below (in cell under Product 1) is accurate and works. It simply pulls data from sheet A159CLE. My problem is this formula has to be copied down 400 rows and over 50 columns. At every row change, the formula needs to change to reflect pulling from a different sheet. The sheet names are in Column A1 listed as Display Pog #. I have been using the find and replace to change out the new sheet names, but with 400 rows this gets very tedious.
I have an autoshape rectangle which is linked to a cell on my spreadsheet. This cell will auto update whenever i type a number into a different cell (match and index formula).
I want the colour of the rectangle to be green, amber. red or black depending the value my formula brings back. I have managed to do this but the colour does not automatically update. Also when the colour goes black i will need the font in the text box to be white, at all other tines it will be black.
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D 1 Task___________Trigger_____________Days_____Due Date 2 Design begins__Proj OK______________10____10-Jan 3 Specs written__Design begins (A2)____5____15-Jan (D2+C3) 4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName() On Error GoTo errhandler Sheets(1).Name = Sheets(1).range("d10") Exit Sub errhandler: MsgBox "sheet name is already exists" End Sub
I have a search feature that will display several results based on the criteria of the search. I also have a Vlookup set so when the topmost name appears in A5 cell the, vlookup shows info for that person across several columns. However if the search shows several people with the similar names then the person I want may not be in the topmost box (A5). Is there any way that I can click on the cell with the correct persons name (may appear in A10) that will change the value in the vlookup command and show the details of the person I can't copy the vlookup down for ten rows as there is other info there. I have room for one row for the vlookup command to fill.
I have a Password login userform on my workbook for users to enter their username and passwords.
Now i want to make a userform where users can change their passwords.
With the login userform i used a application vlookup function to see if the username and password are corresponding. how can i code a userform to look for the username in column A and then change the password in column B?
What I want is that I have a table like below (but it's long for 52 weeks) and long down with Vlookups. I want the formula with which I can just do the copy-paste and it will work. W1, W2.... are the sheet names with exactly the same formats inside.
A B C D E
5
W1 W2 W3 W4
6 Sales 10 #N/D!
[Code] .......
The base formula (for W1) is: =Vlookup($a6;'W1'!$A:$B;2;0)
What I want, is the formula which instead of "W1" will write the sheet name which is in a row 5 (basically - cell name which is equal the sheet name), so with just dragging and moving the formula I will got the data from different sheets.
I tried this: =Vlookup(A6;'indirect("c5";1)'!$A:$B;2;0)
But I got #N/D! as in the example, instead of the numbers (yes, I put numbers into W1 and W2 sheets .
I'm looking for a formula that will take the cells used as a heading and place them cell into columns with the corresponding rows under the heading.
I'm thinking that the formula will have an offset that counts the blank cells in column A then place the text from the heading cells (by heading cells I mean the ones that say "Type A" and "Code X") next to the rows with the products.
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows: =VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0) but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following: =VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE) The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
What I mean is, I have a formula that sums a specific cell across several tabs.
=sum('120:125'!C15)
Lets say that this formula resides in a summary sheet. And that the summary sheet is definable by a control in another sheet (user friendly). So in the user friendly sheet, a user toggles to 'Assets'. In the Summary sheet, Assets appears in cell a1, there is a lookup table somewhere, and a lookup value of 120 appears in cell a2.
I want the formula above to adjust for cell a2. If a2 = 115, then the formula should adjust to
=sum('115:125'!C15)
Of course after I understand how to do this, I can do the same with the end of the sheet range and the cell ref.
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
I'm trying to create a list that references an existing data set where I have staff listed month by month and based on today's date, imports only if there is data in that column. I have figured out how to check if the cell is blank or not, but what I want to do now is change the cell that is referenced in the formula based on the date. Here is the format of the spreadsheet I'm working with:
A B C D E F G H
[code].....
In this case, the "Team 1" and "Team 2" and "Team 3" references what team they are on that month. If it is blank, they aren't with the company any longer. The formula I am using is intended to import this data elsewhere, and is formatted like this:
=IF(ISBLANK(B2), "", A2) - My understanding is that this checks to see if B2 has data, and if it does, it inputs the employee name (A3) in that cell.
My ultimate goal is to be able to change the column referenced after the "isblank" calculation based on the date. So if today is April 2013, I want it to check B2, but if it's December 2013, I want the formula to check J2. Is there a way to do this? I don't mind if it's two steps (like if I have to put the date somewhere in the spreadsheet in order to run the calculation), but ultimately it would be the type of thing I could do that would leverage the existing data set so that I don't have to maintain two different spreadsheets of information.
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I am currently using this Formula to Search a table on sheet 2 (Tabelle2) and copy the date in the relevent cell (Cells) into the correct cell on Sheet 1 (Master Sheet).
[Code] ..........
Used in cells E10:AZ30 and E33:AZ46
This works perfectly and is the formula behind all relevent cells in Sheet 1.
I would like to keep this but to add that it also copies the background color of the cell in Sheet 2 to the cell in sheet 1.
If i can Bring this Formula into VBA and add the color changing part, It must only work on the cells listed above..
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due. Column C is when bi-weekly inspection is due. Column D is when monthly inspection is due. Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1 B1 C1 D1 E1
Inspection Date Weeekly Due Bi-WeeklyDue Monthly Due 6 Monthly Due
January 1 2013 Change red Jan 8 & return blank Jan 10 Change red Jan 15 & return blank Jan 17 Change red Feb 1 & return blank Feb 3 Change red June 1 & return blank June 3
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
My goal from image is to enter a number for example in cell F4 and have in appear in L6 so simply L6=F4 but I want it to be negative if cell M2 reads "Outgo" and positive if cell M2 reads "Intake" as selected from the list. Is this possible?
I am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
