Combining VLookup And Sumif?
Oct 3, 2011I think I need to combine a vlookup and sumif, but am struggling.
I need a formula to total the values in 'Drivers & Standings'!AB3:AB37 where 'Drivers & Standings'!D3:D37 matches A2
ADVERTISEMENT
Combining Match And SUMIF
Feb 19, 2014I have three columns (Location, Task, Time) that I want to gather information from and display on a separate page.
I've used SUMif Function to group task and time together. I want to separate this information between different Job Locations. I believe INDEX and MATCH functions need to be used??
For example: job1 will only display relative hours for that location, While Job2 location will display relative hours on a separate summary page.
Combining IF And Either Vlookup Or Index
Apr 17, 2009I think I need to combine functions to allow me to automate data entry from a table from another worksheet. If the Name entered in column A on Exp Breakdown matches a name in column A of Salary Breakdown I cannot seem to write a function to scan the table in Salary breakdown and lookup the percentage that person is paid from a specific program number. I have attached a sample worksheet to hopefully make it easier to understand.
View 3 Replies View RelatedCombining VLOOKUP Formula
Oct 27, 2009I have a set of data consisting of 3 columns.
Column A - Clinic Names (Alpha Numeric)
Column B - Task (Alpha Numeric)
Column C - Output (Numeric)
There are 52 clinics and each clinic has to perform the same 36 tasks
example:
Clinic A Task 1 #
Clinic A Task 2 ##
Clinc A Task 3 ###
Clinic B Task 1 #####
Clinic B Task 2 ######
I would like to seach for a clinic then search for a particular task and then display the output
I tried a Vlookup with a nested Match and that did not work.
Combining A VLOOKUP And PRODUCT Function
Sep 11, 2009I am using the following formula to calulate the compounded rate of return for a series of monthly returns: {=(PRODUCT(1+(b1:b100)/100)-1)*100}
I would like to be able to integrate a VLOOKUP function into the above formula so that it looks at the dates in column A and then apply the PRODUCT function above to the return values in column B that fall between start and end dates specified in cells C1 and D1.
Combining If And VLookup Formula In One Cell
Nov 19, 2013I am trying to create one formula that can be copied to other cells to get varied results.
Here are the formulas
1. =IF('Calculated Rental Fees'!H4='Daily Rentals & Charges'!$B$28,'Daily Rentals & Charges'!$B$30,VLOOKUP('Daily Rentals & Charges'!$A$20,LATECHRGETBLE,2,FALSE)*C4
2. =IF(AND(I4>='Daily Rentals & Charges'!$A$36),I4='Daily Rentals & Charges'!$A$38),VLOOKUP('Daily Rentals & Charges'!$A$22,LATECHRGETBLE,2,FALSE)*C4)
Basically i am trying to calculate late fees for a rental company using the if and vlookup functions.
Combining HLOOKUP AND VLOOKUP To Find Solutions In A Matrix Using 2 Variables
Oct 28, 2009This was a snap in Lotus. Unfortunately, the VLOOKUP and HLOOKUP formulas don't translate to Excel on conversion. I need to estimate the weight of reinforcing steel in concrete based on 7 different sizes of rebar and spacing of the bar between 1" and 24".
I have created a matrix(lookup table) with the bar spacing listed in decimal equivilents in feet on the top row.Inthe row below, I have numbered the columns from 1 to 24. the next row is blank. Along the left side of the matrix, I have listed the bar sizes 3 thru 10. Within the table I have listed all the bar weights/SF of concrete. IE if the slab has 1 mat of #5 rebar spaced 6" oc. If you look in row 7, under column 6, the weight of weight of the bar in that sf of concrete is found. In the part of the worksheet where the caculations are performed set up as follows:.....
VLOOKUP Or SUMIF Or
Sep 22, 2009I have a workbook containing 2 tabs.
Tab 1 has columnar data with column A containing locations; however, each location may be listed multiple times on different lines - once for each piece of equipment at that location. Tab 1, column B has a piece of equipment listed. Tab 1, column C has a price associated with the piece of equipment in column B.
Tab 2 contains contains columnar data with column A containing locations. I need to populate Tab 2, column B with the sum of all equipment associated with the location in column A.
I have used VLOOKUP to try and find matches for the lookup_value in Tab 2, column A, then return the value of the price from Tab 1, column C.
Problems have been that it returns only the first instance of the location data, not a sum of all. I know the formula is missing something, but cannot ID it.
Formula as used:
=VLOOKUP(B4,'Tab 1'!$I$4:$AI$461,3)
B4 is the column on Tab B that contains all of the locations (lookup_table)
Tab 1 I4 thru AI461 is the table_array where all locations are listed
3 is the col_index_num indicating that the price is in the 3rd column over
Sumif? Sumproduct? If? Vlookup
Jan 30, 2009I have a daily tracking sheet. I want (off to the right) to be able to enter start/end dates and have it sum the total grossage for JUST those dates alone. Which function do I use?
http://s401.photobucket.com/albums/pp94/nmweir/?action=view¤t=untitled.jpg" target="_blank">http://i401.photobucket.com/albums/pp94/nmweir/untitled.jpg" border="0" alt="Photobucket">
direct link? :
http://i401.photobucket.com/albums/p...r/untitled.jpg
Sum With If Using Array Functions Or Sumif With VLookup
Apr 7, 2014In sheet1 I have name(column A) and value(column B)
In sheet2 I have name (column C) and key(column D)
In sheet 3 I have results
Example ( It is just a total nonsense example, the real data is net inflow of some funds that are unique)
Sheet1
House 1000
Car 1500
pet 2000
Sheet 2
house1
car1
pet2
So in the sheet 3 I want to put a formula that is capable to sum all values of the sheet2 if the name has a key of 1in the sheet2, the key columns has values of 1 or 2
I think in SQL will be something with join and group by with having clause.
The result will be 2500 in the sheet 3.
What I tried: My attempt is to do something like this code ( using array functions).
“Vlookup” Or “Sumif” With Multiple Criteria ?????
Feb 1, 2010I would like to take a precise value from one table which corresponds to two different criteria. See the example attached with this message.
View 3 Replies View RelatedVLOOKUP Or SUMIF With Concatenated Cells
May 23, 2008I have a worksheet that is utilizing a VLookup to pull some values from another worksheet based on a composite number. I have checked the numbers for their format, length, and value (dangling spaces, etc.). I still cannot get this VLOOKUP to work correctly. I have attached the file.
Column H on the Cost Report sheet holds the formula in question. It concatenates the values in Columns C,D,E,&F to create a composite number to look for in Column B of the Original Estimate sheet. It is supposed to pull the $ value from Column D of that range.
I have tried everything. I passed the composite number into TEXT, --(Double Unary), INT, tested for both #'s length with LEN and have converted the formatting between text and numbers.
Combined VLOOKUP With A Date Range SUMIF From Pivot Table Data?
Feb 13, 2014I have a report I am attempting to populate with data from a pivot table in another worksheet. Column A holds all the reference numbers (primary key), column B contains various start dates, and I want column C to contain all the payments made since the start date for each reference number.
The source data is a pivot table with Row = Reference number, column = transaction date, values = transaction amounts. This is an extremely large table, as I'm processing data from almost 1,200 cases, which each have around 20 payments spread over the last year, on completely random days. What I would like to do is build a formula in my report which looks up the records for the reference number from column A, and then adds up all the payments which have been made after the date in column B (and ignore any payments in the table which are before that date).
And to make things more complicated:
if an error is generated, it needs to return as 0, not #N/AThe report has the dates in UK format dd/mm/yyyy, but the pivot table has the dates in SQL format: yyyy-mm-ddThe pivot table is connected to a SQL database via ODBC and has to refresh every time it is opened.
=IF(ISERROR(VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE)),0,VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE))
VLOOKUP Or SUMIF: Find The Line Staus Of Each Product In Production Against The Order
Jun 2, 2006I have a very large spreadsheet where i have orders, product and line status listed. I neeed to find the line staus of each product in production against the order. I'm using an array sumif formula but since the spreadsheet reachs 10000 rows of information I dosn't alway calculate correctly.
ORDERPRODUCTSTATUS
ABCDAPPLEPICKED
ABCDORANGEON HOLD
ABCDPEACHSHORT
ABCDYAMSSTAGED
EFGHAPPLEPICKED
EFGHORANGEON HOLD
EFGHPEACHSHORT
EFGHYAMSSTAGED
Required Result
Order
ABCDAPPLEORANGEPEACHYAMS
PICKEDON HOLDSHORTSTAGED
Formula- To Pull Cell Values Similar To A SUMIF Function (SUMIF(range,criteria,sum_range))
Oct 25, 2007I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedNested SUMIF Statement Or Multiple SUMIF
Sep 17, 2009I need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.
I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.
SUMIF In A Column: The First Instance Of Each SUMIF
Apr 21, 2009I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
SUMIF And SUMIF Not - Using Two Formulas In One Cell
Feb 27, 2012I am wanting to use these two formulas in one cell. Is there anyway to do this? If "AD3" is 0 I want this =SUM(X3:AC3) and then if cell "AD3" is greater than 0 I want to basically use this formula
=SUM(AH3,X3:AC3)-AD3.
Is there anyway to merge these two formula's?
Combining IF, AND, OR.....
Jan 7, 2009I have some code where I use and statements, as follows:
View 4 Replies View RelatedCombining IF And IS
Jan 14, 2007I want to see if a goal has been met and get a "Yes" or "No" so I wrote
=If(A1>=A2),"Yes","No"
But on months not worked where goal and production both equal 0 then I am getting a return of Yes. How can I say is A1 >= to A2, but if both are 0 return N/A?
Combining AND And OR
Apr 20, 2009I am having problems combining AND and OR into a single statement. To start I have a statement =IF(AND(B978="P",R978=0,S978=0),"processed",""). If B=P and R=blank and S=blank then display PROCEED else make blank.
What I want to do is check if S is blank or "N" but when I try to add an OR I get error messages regarding missings )'s =IF(AND(B978="P",R978=0,OR(S978=0,S978="N"),"processed","").
Combining Two VBA Together
Oct 11, 2012I have two vba the first one records the date & time of a cell change in column a and places this in column b
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("a:a")) Is Nothing Then
Target.Offset(0, 1) = Date & " " & Time
End If
End Sub
The second one is a function to get the User logged in to windows.
Function UNameWindows() As String
UNameWindows = Environ("USERNAME")
End Function
What I really could do with is a way of incorporating the user name in the first function so it records date, time and user?
Combining First & Last Name
Sep 20, 2006I have two seperate columns, First Name (Column B) and Last Name (Column C). Is there a way a macro can combine the two into one cell Last Name, First Name.
View 3 Replies View RelatedUDF - Combining VLookups
Dec 17, 2012I am trying to write a UDF function where I lookup if a value is on a range on different sheet. I would like to be able to write what I want the result to be in the function. I also hard coded that the function need 3 range and 3 results, but I know it is possible the make the number of component vary depending on what the user writes. I would like my function to do that.
Here is what I have written so far :
VB:
Function find_para2(var As String, rng As Range, result1 As String, rng2 As Range, result2 As String, rng3 As Range, result3 As String)
If WorksheetFunction.IsNA(WorksheetFunction.VLookup(var, rng.Address, 1, False)) = False Then
find_para = find_para & result1 & ", "
[Code] .....
Combining If And Lookup
Jan 31, 2009I need to find a formula to show the time allowed for each person, now they recomend combining 'if' with 'lookup'. now I may be having a blonde moment but I have tried to figure it out for a while now and i am stuck.
View 14 Replies View RelatedCombining Two Columns Into One
Feb 27, 2009Trying to combine Column A (First Name) with Column B (Last Name) Probably very simple.!
View 2 Replies View RelatedCombining Several Rows In One
Jan 16, 2014I have a big amount of data and want to consolidate it.
I have identical text in Columns 1,3 and 4, but the text in Column 2 is different for all.
How do I make 1 row instead of 3 with Column 2 consolidated?
See the attachment : Excel_list.xlsx‎
Combining Records Together
Oct 25, 2008I have a problem in excel that is very urgent to resolve. I have a table that contains duplicate records e.g two people living at same address. I want to merge those records whose address field value is same. Find attached an excel sheet that contains the exact data and the exact output that I want. I know it requires VBA coding.
View 4 Replies View RelatedCombining Code..?
Jun 11, 2009I have two different bits of code as follows:
View 3 Replies View RelatedCombining =REPT And =INT
Oct 29, 2008ok - I have numbers that need to be converted to 12-digit numbers with leading zeros if they are less than twelve digits. for example, 1234567 would turn into 000001234567 to have 12 digits. to do this, i use:
=rept(0,12-LEN(A1))&A1
additionally, i need to strip off the last three digits and replace them with three zeros. my example would now become 000001234000. assuming the result of my first formula (above) is in cell B1, i would use:
=INT(B1/1000)&"000"
Is there a way to combine these two functions into one formula to make this conversion process more painless? Or is there another formula/function I can use that I haven't thought of or do not know?