Command Button To Call Macro Based On Selections In Two Combo Boxes
Aug 21, 2006
I have two combo boxes that both contain 7-12 separate search criteria for the user to choose from. The other includes months and the other value ranges in text form. Based on the selections, e.g. "August" from other and "increased by more than 5 %" from other, I'd like to have a command button to execute the appropriate macro. I've already compiled the macros for each occasion but I just can't figure out how to get the button to execute them. Can I use the Select Case statements? If so, how?
Oh, and whether it's relevant or not, the boxes and the button are from the control toolbar.
View 5 Replies
ADVERTISEMENT
Apr 22, 2006
I have created a command button so that the sheet asks for a password. Now I need to include that in an already created code. I have created a command button as:
Private Sub CommandButton1_Click()
If LCase(Me.TextBox2) = "password" Then
Run "Showall"
Else
Run "Hideall"
End If
End Sub
Can someone tell me how to call this macro in another macro. That is when another macro is running and if the condition fails, this macro should be called. Is it something like run "CommandButton1"?
View 9 Replies
View Related
Feb 1, 2007
I would like to create a combo box however the contents of the combo box depends on what i have selected in a previous combo box.
View 2 Replies
View Related
Jun 26, 2006
I am trying to create a command button in Microsoft Excel (Office 2000) that enables me to reset the check box status for a worksheet from checked to unchecked. The worksheet contains approximately 50 check boxes and is meant to be reused. Is this possible? If so, how can I program it to do so?
View 2 Replies
View Related
Sep 15, 2007
locate the error in this code.
The error is Compile Error
Sub or Function not defined.
It seems to work ok when enabled from within the Command Button
but when the same macro is called from the button, it gives an error at the first-line following Loop.
The code was pasted in a module as Sub End_Input()
and the button was modified with a Call function to the subroutine.
The button code looks like this:
View 10 Replies
View Related
Dec 31, 2009
I want to populate the values of two textboxes that we will call TextBox5 and TextBox6 from columns W and X of a spreadsheet called "PowerAnalysis" when a selection is made form ComboBox5.
The ComboBox5 works perfectly now. I just need it to populate the other two text boxes.
All the data resides in the same row on the same sheet of PowerAnalysis when the selection is made in ComboBox5.
I hope I have been able to give a clear picture of what I am wanting to do.
View 9 Replies
View Related
Oct 4, 2009
I have worked out (through reading and what not) how to link a combo box to a range in a worksheet. What I need to do is relate what is selected in that combo box, to another combo box which picks from another range. I have a data spreadsheet called "Offices". It's set up as follows
(Sorry, it's really frustrating trying to format it to a table type thing but you get the gist)
ROW NUM______COLUMN A____________COLUMN B
---------------------------------------------------------------
1_____________DistrictOffice1_______...fice1@test.com
---------------------------------------------------------------
2_________________________________OFFICE 1
3_________________________________OFFICE 2
4_________________________________OFFICE 3
5_________________________________OFFICE 4
---------------------------------------------------------------
6_____________DistrictOffice2_______...fice2@test.com
---------------------------------------------------------------
7_________________________________OFFICE 2...............
View 4 Replies
View Related
Mar 14, 2009
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
View 3 Replies
View Related
Oct 5, 2006
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
View 2 Replies
View Related
Jul 26, 2006
I am developing a spreadsheet with numerous information on our different suppliers offices in the country for each of our outlets. I am tryin to define a way to do the following:
If a colleague selects a company another list will appear with the region and when the region is selected a list of the offices will appear.
View 3 Replies
View Related
Jan 30, 2009
I need a code for "click-able button" in my excel sheet that will call makro "copy" which I have connected with ThisWorkBook /Sub copy() .../ or in other case with Modules (module 7 for example).
So, what to add between this:
Private Sub CommandButton1_Click()
?
End Sub
View 9 Replies
View Related
May 23, 2006
I want to call on a function with a macro/button in the same way as when you choose "insert-function" but in a way that the user himself is able to put in values on the spredsheet.
View 7 Replies
View Related
Oct 13, 2009
This should be very easy, but I am not getting it to work. I have a userform with a combo box and I just want to hard code the values to it in VBA. I want the value in the combo box to be 1 - 10. Here is what I have so far.
View 3 Replies
View Related
Jun 5, 2007
I'm trying to allow a user to chose from four different variables through combo-boxes as their Y and X coordinates to be displayed in a scatter plot. I'm able to populate the combo-boxes but don't know where to go from there to apply this to a chart.
View 9 Replies
View Related
Jun 6, 2007
I have 180 different images to display with 60 different situations. This means that for every combination of 4 variables, there are 3 images. What I have set up right now are combo-boxes where a user would be able to select the situation which best suits them within the four variables. What I would like to happen would be to have the 3 images pertaining to the chosen variables appear within the worksheet. These images could be put within a worksheet or accessed through a folder.
View 3 Replies
View Related
Jan 8, 2008
How do I make a list of selections for user to choose from in my combo box?
View 9 Replies
View Related
Jan 16, 2010
I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
View 7 Replies
View Related
Jan 28, 2014
How to hide command button based on another cell?’ [URL] .....
This works faultlessly but for only 1 Button. I tried adding in the code again for a second Button but it creates a conflict. I made a slight adjustment to your original code, to show the button when the cell is populated, which works well…
[Code] .....
Any way I can:-
1. Add additional buttons which reference their own cell?
CommandButton4 – H9
CommandButton6 – I9
CommandButton2 – Q9
CommandButton3 – S9
2. And add one button which activates based on one of 3 cells?
CommandButton1 – J9 &/or V9
View 5 Replies
View Related
Jan 16, 2010
I have a command button on a worksheet, not in a user form. I know the command button has a property called Visible that I can manually set to False.
I want to set this property to False if the value of the B3 cell is less than 2.000
View 2 Replies
View Related
Aug 26, 2008
I am using Excel 2003. I have created a workbook containing two sheets. The first sheet is designed as a form for our managers to complete. The fields they are required to complete are based on the selection they choose from a drop down field (set up through data validation).
I have created a command button which when you click it opens up the second sheet of the workbook asking you to complete the individuals work pattern. I am trying to hide this button so that it only appears when you select certain options from the drop down field.
I have looked back through posts on here and have tried adding the VBA code to the worksheet around commandbutton1.vissible = False in an IF statement but can't get this to work. A colleague has suggested that you can't hide command buttons because they are fixed items - is this the case.
View 9 Replies
View Related
Dec 20, 2009
I have created a command button from the Excel 2003 from the Macros toolbar that I placed on my worksheet. I want to use this button to activate an existing macro. Currently I have no code entered for this button and the button when clicked on behaves as an object to be edited, moved, etc. How should I proceed?
View 6 Replies
View Related
Jul 5, 2006
I am trying to attach a recored macro to work via a command button - but keep getting the error message "select method of Range class failed.
When I run the macro through the normal way it works, but I want to be able to click on a Command button for it to work.
I have copied the recorded macro code to the command buttons code field
Do I need to use the code for the Cmd Btn to tell it to run the Macro -
View 3 Replies
View Related
Jun 28, 2008
What i am trying to do is make a command button appear when you hit any cell of the row its on. For example, If you were to hit any cell on rows 1 or 2 the command button will appear and when I am not on the visible property goes back to false. I have a ton of buttons on this sheet and I am trying to clean it up so buttons only appear as needed.
View 9 Replies
View Related
Apr 17, 2014
I have a userform with a command button which fires a macro.
everything works fine so far.
my problem is:
I would like to add a msgbox at the end of the macro which confirmes "successfully completed".
I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.
(see below)
Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"
[Code].....
Unload Me
Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2
[Code]....
View 2 Replies
View Related
Dec 28, 2011
The sceanrio is that I use vba to create commandbutton and make that commandbutton call a macro
Code:
With ActiveSheet.Buttons.Add(183.75, 38.25, 96.75, 38.25)
.Name = "Test"
.OnAction = "anothermacro"
End With
ActiveSheet.Shapes("Test").Characters.Text = "Test"
View 3 Replies
View Related
Mar 26, 2007
i have created a very simple macro and wish to assign it to a command button i have placed on my worksheet.
View 9 Replies
View Related
Oct 17, 2008
Using workbook A, I have created a new workbook (let's call it workbook B), and have copied a module over to workbook B using macros.
My question is, is there a way to assign the module to a command button using vba?
View 9 Replies
View Related
May 26, 2009
I need a macro for a command button to perform the following:
If B8 is the active cell and I click the command button,
transfer value from:
B3 to B8
D3 to D8
E3 to E8
F3 to F8
G3 to G8
H3 to H8
I3 to I8
Likewise, if B9 is the active cell and I click the command button,
transfer value from:
B3 to B9
D3 to D9
E3 to E9..........
View 9 Replies
View Related
Mar 5, 2007
I have a command button in a spreadsheet that for some reason each time I click it, the button and text gets larger. I can edit the button to shrink it down again, but can't stop the growth...
View 6 Replies
View Related
Mar 6, 2014
I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.
View 6 Replies
View Related
