locate the error in this code.
The error is Compile Error
Sub or Function not defined.
It seems to work ok when enabled from within the Command Button
but when the same macro is called from the button, it gives an error at the first-line following Loop.
The code was pasted in a module as Sub End_Input()
and the button was modified with a Call function to the subroutine.
The button code looks like this:
I have created a command button so that the sheet asks for a password. Now I need to include that in an already created code. I have created a command button as:
Private Sub CommandButton1_Click()
If LCase(Me.TextBox2) = "password" Then
Run "Showall"
Else
Run "Hideall"
End If
End Sub
Can someone tell me how to call this macro in another macro. That is when another macro is running and if the condition fails, this macro should be called. Is it something like run "CommandButton1"?
I have two combo boxes that both contain 7-12 separate search criteria for the user to choose from. The other includes months and the other value ranges in text form. Based on the selections, e.g. "August" from other and "increased by more than 5 %" from other, I'd like to have a command button to execute the appropriate macro. I've already compiled the macros for each occasion but I just can't figure out how to get the button to execute them. Can I use the Select Case statements? If so, how?
Oh, and whether it's relevant or not, the boxes and the button are from the control toolbar.
I am writing a lot of code and have separated each section in different modules For example, I have one module titled OpenR2D2 and another titled StoreName
I want the sub in StoreName to run at the end of OpenR2D2 but I get this compile error "expected variable or procedure, not module"
Here's the end of the code where I put it. What have I not thought of?
ThisWorkbook.Activate
Range("B9:G9").PasteSpecial
R2D2data.Activate
Range("B7:G7").Copy 'Sch Actual VLH
ThisWorkbook.Activate
Range("B12:G12").PasteSpecial
Call StoreName
R2D2data.Close Savechanges:=False
Application.ScreenUpdating = True
End Sub
I got a problem though with specificying a 2d array. I basically want to click the "command button" and display one collum with names and the one next to it with results. The only problem is trying to get vba to display this on the work sheet.
Dim students(5, 2) As Variant
students(1, 1) = "John"
students(1, 2) = 45
students(2, 1) = "Ryan"
students(2, 2) = 56
students(3, 1) = "Tim"
students(3, 2) = 78
students(4, 1) = "leah"
students(4, 2) = 89
students(5, 1) = "ray"
students(5, 2) = 23
I am able to do it for a one dimensional array but not the two dimensional one. Can anyone point me in the right direction?
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies View RelatedHow can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?
Dim strButname As String
strButname ="But1"
Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?
This doesn't work, but gives you an idea of what I am trying to do.
Controls(strButname)_click
I am in the process of re-building a major project due to bugs. In the process, I plan to re-organize my sub-routine grouping within modules. In the source file, I have 18 standard modules, with 10-30 routines in each one.
What I would like is a printout of each routine name and which module it resides in, so I can check off each one as I copy it and paste it into the new file. I see that I can get a psuedo tree-view of my project in th eObject Browser, but can't figure out how to print that.
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies View RelatedThis is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
I want to be able to call one user form from multiple ActiveX command buttons. The problem is, the number of command buttons depends on user input on another worksheet, so it's variable.
I've renamed all of the command buttons so they are named "CommandButton" & i, where i is an integer between 1 and, say, 200. I want each of these buttons to direct to the same UserForm where additional information can be entered.
I can't think of a way around the event-handler procedure name.
Sub [Command Button Name]_Click
to call the User Form. I won't know the command button names, because I won't know how many there are (max i) until the user inputs.
Basically, I want to create a For loop through the max i and have the event-handlers call the user form
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown
.State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
I need a code for "click-able button" in my excel sheet that will call makro "copy" which I have connected with ThisWorkBook /Sub copy() .../ or in other case with Modules (module 7 for example).
So, what to add between this:
Private Sub CommandButton1_Click()
?
End Sub
I want to call on a function with a macro/button in the same way as when you choose "insert-function" but in a way that the user himself is able to put in values on the spredsheet.
View 7 Replies View RelatedIs it possible to call a Forms Command Button procedure from a Module?
View 3 Replies View RelatedI am having a problem calling buttons. I have an array with button names and another array with their caption texts and I would like to call them one by one in a for loop:
For i = 1 To UBound(button_array)
Sheets("Statistic").Shades(button_array(i)).Caption = button_text(i)
Next i
But the only way I seem to be able to call them is by their set names, like:
Sheets("Statistic").statistic.Caption = button_text_ENG(i)
I have a control button on a worksheet that is suppose to call a userform. I am using the code
Frm_Customs.show
But I keep getting an error. The button was created from the control toolbox.
I am trying to create an if statement that would check the results of a drop down menu and return a command to the user to enter certain information.
I created a drop down list, offering a list of projects 'a', 'b' or 'c'. I then created an if statement in the next cell. If user chooses project 'a' then the cell will return the project number associated with the project. The issue I am running into is that if the user chooses project 'c' in the drop down I need the cell to return a command for the user to enter the project name in the cell rather than the cell return the project number. How do I do that?
I've designed a performance indicator (PI) recorder for up to 12 users, it has a userform allowing the users to input their data and a button to save the data and unload the user form. the data is saved using the following
Dim NextRow As Integer
On Error Resume Next 'skips line if workbook is not open
ActiveWorkbook. Sheets("DATA").Activate 'sets the "data" worksheets as active
NextRow = Worksheets("DATA"). Range("A" & Rows.Count).End(xlUp).Row + 1 ' finds the next empty row
With Worksheets("DATA").Range("A" & NextRow) 'inserts the data from the user form
there follows a series of offsets to slot the data into the correct column,
then this code to save the workbook
ActiveWorkbook.Sheets("reports").Activate
Application.DisplayAlerts = False ' suppress overwrite warning message
ActiveWorkbook.SaveAs "MY PATH"
CreateBackup=False
Application.DisplayAlerts = True
MsgBox "Spread sheet Saved"
The problem I'm having is that when the user then closes the excel application there is a conflict between the users 'saves' i.e. one ultimately will overwrite the other. is there a way round this ?? (this is in EXCEL 2000)
Private Sub Worksheet_Change(ByVal Target As Excel. Range)
Dim S As String, X As Variant, n As Long
If Target.Column <> 3 Or Target.Cells.Count <> 1 Then Exit Sub
If IsEmpty(Target) Then Exit Sub
S = Target.Text
On Error Goto Reset
n = Application.Substitute(S, "-", "")
On Error Goto Reset
Application.EnableEvents = False
X = Application.Match(n, Workbooks("Database.xls"). Sheets("Products").Range("B1:B14000"), 0)
If IsNumeric(X) Then
Target.Offset(0, -1) = Workbooks("Database.xls").Sheets("Products").Cells(X, 1).Value
Else............................
But each time i add it in, it ether's turns off the second statement and second works or vice versa. How can make both codes work at the same time without conflicting each other.
I have searched this topic but I came up with nothing regarding my exact situation.
I have 5 buttons on sheet 1. I want them to all direct me to another sheet in the same workbook. However, some buttons will contain more than one sheet.
Example: Button 1 will direct me to 4 different sheets. Is this possible?
Also, When I open the workbook, I see many sheets that I am working from but I do not want them to show up when I open the workbook. The only way to see these sheets is to click on the command buttons at the top of sheet 1.
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
Is it possible to check multiple checkboxes with a command button?
For example, I have 20 checkboxes (C5 to C25) when command button is clicked
C5, C12, C17, C20 would be checked.
how to keep a command button in a certain location even if the a row or Column is Deleted or Inserted into the worksheet?
View 1 Replies View RelatedI know that this may seem a little strange to request as you can just select the row and delete it, however the sheet is designed as "idiot proof", so I would like to implement this.
Basically, I have a box which states "If you need to delete a row due to incorrect entry, please type the row number here (next cell), and click delete".
I want to know if by using VBA, you can reference the number entered in the cell, and use this to determin the row in which we are required to delete.
I have a 2 worksheets. One "Projects in Process"and the other "Project Completed". when the users fill in the information in cells A4-F4 (line 4 is the starting line and it could go down as far as line 23 or a23 - f23) In Projects in Process they press a "completed Project" command button and the data in a4-f4 copies over to worksheet "Projects completed". In the next available row (starting at row 4).
View 13 Replies View RelatedI am running Excel 2003 and in my workbook I created a macro and assigned it to a toolbar comman button, "Copy Filtered Data". This macro copies the visible data into a new workbook.
This works well but others in my company will also be accessing this workbook from a sharepoint and I discovered that when they open it this command button is not on their toolbar.
Would anyone know what I need to do to have this button load on the toolbar when the workbook opens?
Also, I would like this button to either unload or greyout when the workbook that this button is intended for is closed.
I want to create a command button that will clear whatever is written in a text box. I guess for this to work it needs to select all, then clear. The command button and the text box have been created using the control toolbox.
View 2 Replies View Related
