I want to write some code if a cells comment changes. Worksheet change doesn't fire if you right click a cell and edit the comment and save it. Is there an event that does fire when the comment changes?
View 2 RepliesIm trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I am looking to have a select few cells generate a comment when the user changes their value. I don't want the entire sheet to be affected as it will only apply to the header row of columns J:P.
I'm not sure if it matters but I have the worksheet protected and the cells in question are unlocked.
Below is an example of the code I'm trying to get to work.
Option Explicit
Public preValue As Variant
Private Sub worksheet_change(ByVal Target As Range)
End Sub
If Target.Count > 1 Then Exit Sub
Target.ClearComments
[Code] .......
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
It seems that you can change position when you editing comment and its remembered, but when its showing its alway's on default position.
Is there way to change position of displayed (when you mouse over cell and coment pops up) comment position?
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedI am trying to capture the value of a cell before a change even. The attached Macro will report the value before the change but does not store it so that I can use it in another module. What I am trying to do is capture the value before the change and then look that value up in another worksheet (in the same workbook) so I can make the same change in the second workbook.
The values will always be in Column B and will always be string characters.
The code I am using for the change event is as follows: ....
My favorite question in IT was, "Can you recover the file I did not save?" and now I am basically asking the same question.
I have headers on one sheet tied to fields on another sheet. If the user changes a header I would like to display a message that says, "The header you changed, 'OLD MESSAGE HEADER' will no longer match the value on the look-up sheet. DO YOU WANT TO CONTINUE"
If they say no then the old header is restored. Is this possible?
I have looked at the threads concerning cell change events but cannot find a solution to my situation. I have a worksheet with a cell using a validation list. I wish to exicute a procedure whenever the dropdown list is changed in that one cell. Everything I have seen in the Worksheet event threads is evaluating the contents of a cell and I am attempting to exicute if the cell changes.
View 2 Replies View RelatedI have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
myColumnOne = Range("NPN").Column 'this is column B, NPN is a Named Range of B1
myColumnTwo = Range("NPCH").Column 'this is column E, NPCH is a Named Range of E1
using these variables I want to say
When data is entered into any cell in myColumnOne
first check to see if this same data already exists in myColumnOne
if it does then check to see if in the row where the data already exists, if the corresponding cell in myColumnTwo ISBLANK then MsgBox
if the corresponding cell in myColumnTwo is not blank, allow the data to be entered.
Example:
Col B….Col E
ABC…..xxx
XZY….........
I have not used an event macro before and am trying to one update a cell when changing a cell. I am basically copying a number to another cell that is an input for a calculation and then returning the calculated value back. How do I reference r69 in the code to start the event macro?
View 2 Replies View RelatedI'm trying to create a worksheet change event macro that will change the colour of the cell when you update the value in that cell.
I have column C with 140 rows and when one of the cells in the column is changed by the user, I need the same cell to highlight in yellow. The highlight would then be removed once the user has acted on the change in the value, and that'll be done in another macro.
I understand I need a worksheet change event macro in the specific sheet and need the following code for yellow:
Code:
.Interior.Color = RGB(255,255,0)
, but any further I get stuck as it involves 'target addresses'
I have looked at a series of Change Event topics and code but can't see what I need. I simply want a macro to run automatically when a cell ....which contains the Maximum time from a range.... changes. I assume I use .... Private Sub Worksheet_Change(ByVal Target As Excel.Range) ...but I have no idea what code to use...
View 4 Replies View RelatedI have a code where column K is not responding to a value being deleted out of column J. I've highlighted the portion of the code dealing with this. Deletion should trigger the worksheet_change event to clear out column K as it's supposed to. how to get deletion to take effect?
View 4 Replies View RelatedThis is part of a macro in a worksheet_change event. When a cell in column J gets deleted by a user, the corresponding cell in column K should also clear. But it's not responding to the delete.
It DOES clear when the other 2 criteria are met (.cells(1,10) = 0 and .cells(i,5) <> "Annuity"). The worksheet_change event should pick up on the cell deletion, but it's not. And column J is already a trigger for the macro to run, so I'm not sure what's going on. Either the trigger is still wrong, the isempty(.cells(i,10)) is not correct syntax, or this event just doesn't respond to cell deletion.
I have a spreadsheet control inside of a userform. I can generally access this spreadsheet and do what I need to do with it. My problem is that I need to monitor it for the cell change event. I normally accomplish this with:
View 4 Replies View RelatedI need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.
Private Sub Worksheet_Change(ByVal Target As Range)
With Target.Cells(1, 1)
If Not Intersect(.Cells, Range("b3:b6")) Is Nothing Then
Range("b7") = "Not Found"
For i = 3 To 6: txt = txt & Cells(i, "b").Value & "_": Next
For Each r In Range("m3", Cells(3, Columns.Count).End(xlToLeft))
For i = 0 To 3: txt2 = txt2 & r.Offset(i).Value & "_": Next
If txt = txt2 Then
Range("b7").Value = r.Offset(4).Value
Exit For
End If
txt2 = ""
Next
ElseIf Not Intersect(.Cells, Range("b16:b19")) Is Nothing Then
Range("b20") = "Not Found".....................
I'm working with this code right now. The problem is the macro will only work if i type the numbers manually. if the values are retrieved from a combobox, the code above down not work as it cannot read the values.
I'm trying to create a sheet where clicking in a range brings up, in my users words, "a box I can type loads of comments in". They want some kind of flag in this cell showing if comments are posted or not. So far so ok, got the userform to pop up using the selection change event below and dump the actual comments somewhere the user won't look. A rather inelegant IF statement to see if there's anything in the dump cell gives them their flag.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Intersect(Target, Range("B2:B300")) Is Nothing Then Exit Sub
UserForm1.TextBox1.Value = ActiveCell.Offset(0, 10).Value
UserForm1.show
End Sub
So what's the problem? When I select entire rows, the userform pops up. Is this unavoidable?
I've set up code where when a cell within a specified range of cells is selected, a macro will run. This works all well and good except for when a whole row, column or range containing the defined cells is selected, there is a run time error. There is no situation where I want multiple cells selected to run the macro, so I only want to run the macro when only a single cell within that range is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("GoToRange")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
If Not Intersect(Target, Range("GoToRange2")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
End Sub
The ranges defined are non-contigious ranges.
I am trying to use the worksheet calculate event to automatically change the color of a cell only when that particular cell changes. In E2 of the worksheet is a formula use to determine rating based on the result of 2 other cells. The rating is classified as follows
Low
Moderate
High
Maximum
I would like to generate a different set of color to the cell and fonts for each of the rating. For example,
"Cyan" to the cell E1 and E2 with Black font if the result is "Low"
"Plum" to the cell E1 and E2 with "Black font if the result is "Moderate"
"Blue" to the cell E1 and E2 with "White" font if the result is "High" and
"Red" to the cell E1 and E2 with "White" font if the result is "Maximum"
Hide Columns based on Date value in cell (Worksheet Change event)Looking for a worksheet_change event macro that will automatically hide columns based on a value in cell S3. S3 is a data validation pick list of months based on the 1st day of each (e.g. 1/1/2014, 2/1/2014, 3/1/2014, etc.). I have date columns in row 6 from columns T through AQ. These values are 1/1/2014 (T6), 2/1/2104 (U6), 3/1/2014 (V6)....12/1/2015 (AQ6). I would like to hide columns that have a date in row 6 (T6:AQ6) that is LESS THAN (<) the date in S3 after the cell is value is changed.
View 2 Replies View RelatedI have a code and I want to run this macro whan a specific cell change (which has sum formula) and this code also has some calculation. And I m not understanding to overcome this problem through Calculate event.
View 2 Replies View RelatedI have a Change Event macro that works properly. I also have several cells that contain a drop down list. If a user tries to enter an incorrect entry...the debug is triggered on my even change macro.
Here's the piece of the Change macro that has issues. Specifically, the .undo line highlights.
With Application
.ScreenUpdating = False
.EnableEvents = False
Set SelectedCell = ActiveCell
myTitle = Cells(Range("Titles").Row, Target.Column).Value
myRow = Target.Row
.Undo: myBefore = Target.Value
.Undo: myAfter = Target.Value
SelectedCell.Select
It is my general understanding that the change event system within Excel vba is fairly particular as to what will fit the mold of a qualifying change event.
For example, changes that the user imparts to the worksheet and other written code are legitament candidates for change events. However copying down data and cells changing their values indirectly rather than directly may not be considered in the Microsoft change event design.
I would like to know 2 things:
1) Does a cell updated by a market data feed mechanism qualify for a change event?
2) Any list of qualifying change event types. It seems that Microsoft does not have this information.
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedAttached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
I want to know if we can change the color of the comment icon (when we add comment for a cell it gives a triangle form in red) can we change the color.
View 3 Replies View Related