Worksheet Change Event Not Responding To Cell Deletion
Nov 14, 2008
This is part of a macro in a worksheet_change event. When a cell in column J gets deleted by a user, the corresponding cell in column K should also clear. But it's not responding to the delete.
It DOES clear when the other 2 criteria are met (.cells(1,10) = 0 and .cells(i,5) <> "Annuity"). The worksheet_change event should pick up on the cell deletion, but it's not. And column J is already a trigger for the macro to run, so I'm not sure what's going on. Either the trigger is still wrong, the isempty(.cells(i,10)) is not correct syntax, or this event just doesn't respond to cell deletion.
View 6 Replies
ADVERTISEMENT
Nov 13, 2008
I have a code where column K is not responding to a value being deleted out of column J. I've highlighted the portion of the code dealing with this. Deletion should trigger the worksheet_change event to clear out column K as it's supposed to. how to get deletion to take effect?
View 4 Replies
View Related
Nov 12, 2008
if column E is "Annuity", you can type a value in column J and it runs a formula to calculate a value for column K. If E is not "Annuity" it clears the contents of J (which should clear K). What's not working is when column J gets cleared or manually deleted, column K must be blank. The worksheet_change event is not working for deletion of column J.
View 5 Replies
View Related
Jul 25, 2009
I have created a chart with four data ranges. I have a check box for the four ranges. If a check box is TRUE the data is shown in the chart. When I check one of the check boxes, I want the CreateChart macro to run, but this is not happening with the code below?
View 4 Replies
View Related
Mar 6, 2007
I have looked at the threads concerning cell change events but cannot find a solution to my situation. I have a worksheet with a cell using a validation list. I wish to exicute a procedure whenever the dropdown list is changed in that one cell. Everything I have seen in the Worksheet event threads is evaluating the contents of a cell and I am attempting to exicute if the cell changes.
View 2 Replies
View Related
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies
View Related
Nov 22, 2011
I'm trying to create a worksheet change event macro that will change the colour of the cell when you update the value in that cell.
I have column C with 140 rows and when one of the cells in the column is changed by the user, I need the same cell to highlight in yellow. The highlight would then be removed once the user has acted on the change in the value, and that'll be done in another macro.
I understand I need a worksheet change event macro in the specific sheet and need the following code for yellow:
Code:
.Interior.Color = RGB(255,255,0)
, but any further I get stuck as it involves 'target addresses'
View 2 Replies
View Related
Jan 9, 2007
I have a Word document that I'd like to print first, when I click Print on a specific worksheet (not on Print of other worksheets in the workbook, just the one). The worksheet contains customer information and is essentially a cover page for the Word document. the Word document already prints in reverse order, as does the worksheet, so I just need the Word doc to print prior to the worksheet/cover, to give me the total print package in the correct order. I've tried using the following code in the Sheet object for the worksheet in question;
Private Sub Worksheet_BeforePrintEvent()
Dim appWd As Word.Application
Set appWd = CreateObject("Word.Application")
appWd.Visible = True 'Change to False when code is good
'Open Doc
appWd.Documents.Open Filename:="S:BryanQuoting ToolsP'Binder Leading Pages.doc"
'Print Doc
appWd.ActiveDocument.PrintPreview 'Change to PrintOut when code is good
'Close Doc
Set appWd = Nothing
End Sub
View 7 Replies
View Related
May 23, 2007
I need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.
View 9 Replies
View Related
Jan 30, 2009
I am trying to use the worksheet calculate event to automatically change the color of a cell only when that particular cell changes. In E2 of the worksheet is a formula use to determine rating based on the result of 2 other cells. The rating is classified as follows
Low
Moderate
High
Maximum
I would like to generate a different set of color to the cell and fonts for each of the rating. For example,
"Cyan" to the cell E1 and E2 with Black font if the result is "Low"
"Plum" to the cell E1 and E2 with "Black font if the result is "Moderate"
"Blue" to the cell E1 and E2 with "White" font if the result is "High" and
"Red" to the cell E1 and E2 with "White" font if the result is "Maximum"
View 9 Replies
View Related
May 23, 2014
Hide Columns based on Date value in cell (Worksheet Change event)Looking for a worksheet_change event macro that will automatically hide columns based on a value in cell S3. S3 is a data validation pick list of months based on the 1st day of each (e.g. 1/1/2014, 2/1/2014, 3/1/2014, etc.). I have date columns in row 6 from columns T through AQ. These values are 1/1/2014 (T6), 2/1/2104 (U6), 3/1/2014 (V6)....12/1/2015 (AQ6). I would like to hide columns that have a date in row 6 (T6:AQ6) that is LESS THAN (<) the date in S3 after the cell is value is changed.
View 2 Replies
View Related
Jun 17, 2009
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies
View Related
Jul 21, 2009
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
View 4 Replies
View Related
Dec 6, 2011
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
View 5 Replies
View Related
Jun 12, 2007
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies
View Related
Jan 10, 2009
looking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?
Private Sub Worksheet_Change(ByVal Target As Range)
'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user
'and the cell contents are cleared.
Dim val As Variant
Dim msg As String
If ActiveCell.Value "x" Then
msg = "You can only enter an X in the cleared column."
ActiveCell.ClearContents
End If
End Sub
View 9 Replies
View Related
Feb 7, 2014
I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.
[Code] .....
View 2 Replies
View Related
May 28, 2009
trying to get a worksheet change event to work. Basically the code below calls the time_start procedure when cell J16 downwards is selected.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 15 And Target.Column = 10 Then
Call time_start
Else
End If
End Sub
However, I am lost from here on....Let me try and explain what it is I am trying to do. This seems so simple if you know how. Each time that the word "Completed" is entered in to a cell from J16 onwards, the cell two columns to the right on the same row is selected and the current date is entered.
If the word "Completed" is deleted, I want the date on that row to be deleted.
I would also like the choices "Completed" and a blank cell to be given in a validation list via a dropdown if possible to avoid occurances of "Complete" etc and mis-spellings but I understand that a bug may stop me from using this functionality. I am running Excel 2002 on a Windows XP Professional OS.
View 9 Replies
View Related
May 7, 2013
I have the below vba and would like to have the '''event calculated ''' on any event on the worksheet. Right now it only update if updating the val1 thru val6 cells. How can i get the worksheet to update on any event or change on the sheet?
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
fr = Range("a65536").End(xlUp).Row
Set Rng = Range("a2" & ":n" & fr)
If Intersect(Target, Rng) Is Nothing Then Exit Sub
[Code] .......
View 2 Replies
View Related
Aug 22, 2007
I have a spreadsheet with a table of values in range E5 to T158.
A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).
If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.
I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.
I have created a
Private Sub Worksheet_Change(ByVal Target As Range)
in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed
If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)
View 5 Replies
View Related
Sep 24, 2009
On some of my worksheets, the slider bar on the right has become a small square rather than a long rectangle. This causes this slightest shift downward to jump through large amounts of rows. Excel seems to think there must be data down there I need. How do I get rid of empty cells at the bottom of a worksheet so that this no longer happens?
View 2 Replies
View Related
Oct 1, 2013
combine two Worksheet Change event macros into the one macro? The macros are listed below.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)On Error GoTo exitHandler
Dim rngDV As Range
Dim lRow As Long
Dim lCol As Long
[Code]...
exitHandler:
Application.EnableEvents = True
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("O:O")) Is Nothing Then
Application.EnableEvents = False
[Code]...
View 7 Replies
View Related
Nov 30, 2006
I have the following code that should pop up a message when column E is left blank when "other" is typed into column D. But I cannot get it to work.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range, LastRow As Range
Dim x As Integer
If Target.Count > 1 Then Exit Sub
Set rng = Range("F:F")
If Intersect(Target, rng) Is Nothing Then Exit Sub
If Target = "" Then
For x = 1 To 5000
If Cells(x, 4).Value = "Other" And Cells(x, 5).Value = "" Then
Answer = MsgBox("If other, please state", vbOKCancel, "CONFIRMATION")
End If
Next x
End If
End Sub
View 9 Replies
View Related
Mar 28, 2007
I have the following code that 'sort of' works.
Private Sub Worksheet_Change(ByVal Target As Range) ...
View 9 Replies
View Related
Jul 31, 2008
In Col D of my spreadsheet, I have a list of security codes, in this list there is a security code "all", i need a macro that will add 1 to the code, so it reads "all1", now i need the macro to run as soon as new data is pasted to sheet "Lending", the ranges in Col D do change on a daily basis therefore cell reference for security codes is not fixed.
Can this be achieved? ............
View 9 Replies
View Related
Mar 5, 2009
I am using Excel 2007, and I have a macro (that is working) that I would like to run whenever there has been a new selection in a dropdown list on my worksheet. I have done this many times before in other workbooks, and I have always used:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
End Sub
To my knowledge this should trigger the macro when the dropdown selection changes. However, this time it is not working. The macro runs fine manually, but it does not run when the dropdown selection changes.
View 9 Replies
View Related
Apr 25, 2009
This is the code on the Worsheet Change event.
Private Sub Worksheet_Change(ByVal Target As Range)
'Define the RMAs range and count the RMA ships. Do the rest of the math based on this calculation.
Dim intRMACol As Integer, EndRow As Integer, intRMAShips As Integer, LastCol As Integer
Dim rngRMAs As Range, rngHome As Range, sht As Worksheet
Set sht = ActiveWorkbook.ActiveSheet
Set rngHome = Cells(1, 1)
rngHome.Activate
EndRow = Range("A" & Rows.Count).End(xlUp).Row
intRMACol = Cells.Find(What:="RMA#", After:=[A1], SearchOrder:=xlByColumns, SearchDirection:=xlNext).Column
Set rngRMAs = rngHome.Offset(1, intRMACol - 1).Resize(EndRow, 1)
rngRMAs.Name = "RMAs"
rngHome.Offset(1, LastCol + 1).Formula = "=COUNTA(RMAs)"
intRMAShips = rngHome.Offset(1, LastCol + 1).Value
rngHome.Offset(1, LastCol).Formula = "=SUM((" & EndRow & " - 1) - " & intRMAShips & ")"
rngHome.Offset(1, LastCol + 2).FormulaR1C1 = "=SUM(RC[-2] : RC[-1])"
End Sub
I keep getting stuck when trying to set the intRMACol variable. I have used the code all over the place, but only in Modules, never on a worksheet event. EndRow, the variable right above, sets correctly so I don't get it.
Also, do I have to define the Target variable? Am I going about this the right way? I basically want three formulas to calculate when any change is made on the worksheet.
View 9 Replies
View Related
Nov 9, 2009
I'm trying to insert a worksheet change event using VBA. I have this sample code from here -
http://www.cpearson.com/Excel/vbe.aspx
Sub CreateEventProcedure()
Dim VBProj As VBIDE.VBProject
Dim VBComp As VBIDE.VBComponent
Dim CodeMod As VBIDE.CodeModule
Dim LineNum As Long
Const DQUOTE = """" ' one " character
Set VBProj = ActiveWorkbook.VBProject
Set VBComp = VBProj.VBComponents("ThisWorkbook")
Set CodeMod = VBComp.CodeModule...................
View 9 Replies
View Related
Aug 4, 2006
I have this code working fine. It applies conditional formating to two rows ((K3:K65) and (J3:J65)) and checks when a value changes in row B to reaplpy the formatting. I'd like to had add more columns to it. It would have apply the same conditonal formatting on rows ((O3:O65) and (P3:P65)) but when a value changes in row (N3:N65)
So basically, I want to keep the first working part of the code and have it to check at more rows with a different reference for the conditionnal formatting.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
Dim rngJ As Range
If Target.Count > 1 Then Exit Sub
Set rng = Union(Range("B3:B65"), Range("J3:J65"))
If Intersect(Target, rng) Is Nothing Then Exit Sub
Set rngJ = Range("K" & Target.Row)
Select Case rngJ.Value
Case ""
rngJ.Interior.ColorIndex = xlNone
rngJ.Offset(0, -1).Interior.ColorIndex = xlNone
Case Is >= 20.............................
View 2 Replies
View Related
Aug 29, 2006
I am trying to make a macro run automatically based on info entered in a cell. The problem is I need this code on at least three separate sheets in the work book. It doesent work when I try to use the same basic code. The code I am using is below.
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim lLastRow As Long
Dim rgArea As Range, rgCell As Range
Dim COL_B As Integer
COL_B = 2
Dim COL_X As Integer
COL_X = 24
Dim ROW_FIRST As Long
ROW_FIRST = 5
' Find the last row of date in the "Approved" worksheet
lLastRow = FindLastRow(SZ_WS_APPROVED, COL_B)
' Set a reference to the changed cells in column X
Set Target = Intersect(Target, Range(Cells(ROW_FIRST, COL_X), Cells(lLastRow, COL_X))).........................
View 5 Replies
View Related
