Wrong Entry Into Data Validated Cell Triggers Debug On Change Event

Dec 14, 2011

I have a Change Event macro that works properly. I also have several cells that contain a drop down list. If a user tries to enter an incorrect entry...the debug is triggered on my even change macro.

Here's the piece of the Change macro that has issues. Specifically, the .undo line highlights.

With Application
.ScreenUpdating = False
.EnableEvents = False

Set SelectedCell = ActiveCell
myTitle = Cells(Range("Titles").Row, Target.Column).Value
myRow = Target.Row
.Undo: myBefore = Target.Value
.Undo: myAfter = Target.Value
SelectedCell.Select

View 3 Replies


ADVERTISEMENT

Get Cell Value Before Worksheet_change Event Triggers

Jul 28, 2007

In the worksheet_change event I am calling a method for performing some calculations. The method is called only if certain cells are affected. I want to know the cell values before the event gets triggered.

For eg: Lets say Cell A1: 10 Cell A2: 20 I select both A1 & A2 and click on delete. Then I want to obtain the values 10 & 20 in the method called. Is this possible? Currently If I do Cell.value it returns blank.

View 5 Replies View Related

Event That Triggers When Cell Changed By Web Query?

Sep 27, 2006

I run a web query from [url] to import the latest currency rates into Excel. I refresh the data every minute. Every time Cell B19 changes I want to run the following

If Cells(19, 2).Value > 1.27 Then
MsgBox "buy"
End If

I tried putting that code in the Worksheet_Change event but it only works if the user physically changes the cell, not if it's changed by a web query. So how can I run code that triggers when a cell is changed by a web query?

View 3 Replies View Related

Change Cell Triggers Macro To Run

Nov 22, 2009

I have a macro that I would like to run everytime ANY cell is changed in a given worksheet. I've read some posts that explain how to do this when say ONE cell is changed, but I cannot figure out how to expand on that.

View 9 Replies View Related

Preventing Multiple Event Triggers

Sep 15, 2014

I have a worksheet with a Change Event and a Selection Change Event.

When a cell is changed first the Change Event triggers and after that the Selection Change Event Triggers.

I have implemented a solution whereby I set Application.EnableEvents = False so that the 2nd Selection Change Event does not trigger.

However, the problem is that I need to turn EnableEvents back to True so that it can continue monitoring for events.

Is there a way to either only allow 1 event to trigger? Or is there a way to turn the Events back on after a pause of a 1 second or so?

View 3 Replies View Related

Set Audio Alert That Triggers As Excel Cell Value Change?

Jun 9, 2005

I would like to add an audio alert to a spreadsheet cell whenever it changes to a specific value?

View 4 Replies View Related

TextBox Triggers A Code On The Exit Event

Dec 12, 2008

I have a Userform with a textbox1 and a commandbutton. TextBox1 triggers a code on the exit event. CommandButton1 simply unloads the UserForm. If a user enters data in the textbox, but does not exit and instead clicks the commandbutton to unload the UserForm, the exit event code is still triggered and then for some reason the commandbutton no longer responds to being clicked. I can't seem to find a way around this.

If the commandbutton is clicked, I simply want the UserForm to be unloaded and the exit event for the textbox ignored

View 9 Replies View Related

Debug Assistance - Auto Date Entry

Apr 3, 2007

i try to lock cells in the area the VBA code affects. My goal is to actually have affected cells by this VBA code lock immediately after anything is entered in the affected cells. Area needing Debugging is in the If - Else portion. My worksheet will be protected.

Private Sub Worksheet_Change(ByVal Target As Range)
Dim LLoop As Integer
Dim LTargetRange1 As String
Dim LDestRange1 As String
LLoop = 10
While LLoop <= 1000
'Link column B to A
LTargetRange1 = "B" & CStr(LLoop)
LDestRange1 = "A" & CStr(LLoop)
If Not Intersect(Range(LTargetRange1), Target) Is Nothing Then
If Len(Range(LTargetRange1).Value) > 0 Then
Range(LDestRange1).Value = Date
Else
Range(LDestRange1).Value = Null
End If
End If
LLoop = LLoop + 1
Wend
End Sub

View 7 Replies View Related

Does Cell Updated By Market Data Feed Mechanism Qualify For Change Event

Oct 27, 2012

It is my general understanding that the change event system within Excel vba is fairly particular as to what will fit the mold of a qualifying change event.

For example, changes that the user imparts to the worksheet and other written code are legitament candidates for change events. However copying down data and cells changing their values indirectly rather than directly may not be considered in the Microsoft change event design.

I would like to know 2 things:

1) Does a cell updated by a market data feed mechanism qualify for a change event?

2) Any list of qualifying change event types. It seems that Microsoft does not have this information.

View 2 Replies View Related

Dropdown List Triggers Worksheet Change

Apr 26, 2007

Trying to create a dropdown list to navigate to another worksheet . I tried iterations of the following code but am getting an 'object required' error.

If I can't assign the result to a string, how can I change the worksheet from the result of the dropdown list?

Sub DropDown7_Change()
Dim temp As String
temp = ActiveDocument.FormFields(“DropDown7”).Result
Sheets(temp).Select
End Sub

View 9 Replies View Related

SaveAs Triggers ComboBox Change Events

Jan 4, 2009

I have a workbook with several worksheets. One sheet ('Forecast') contains 12 ComboBoxes, which, on a Change event, run a series of macros to show the users certain information and provide certain options: protected 'Budget' or 'Actual' data from a hidden datasheet, or unprotected 'Forecast' cells that respond to user changes. In other words, I can't simply use a series of 'If' statements or VLookups with conditional formatting to get around the ComboBoxes.

OK - So in ordinary use, the ComboBoxes and macros are working as intended.
But there is one situation that causes problems:

When a SaveAs command is used to save the model under a different name, all 12 ComboBox Change Events are somehow being triggered.

So what is it about a SaveAs command that triggers ComboBox Change events?!
And whatever it is, can I turn it off?

(This happens in Excel versions 2000, 2003 and 2007.)

View 9 Replies View Related

Event Change To Change The Sheet Name Based On A Cell Value

Jul 21, 2009

Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far

Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub

View 9 Replies View Related

Change Event To Detect Cell Change

Sep 27, 2007

I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:

Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub

View 2 Replies View Related

Worksheet Change Event :: (ByVal Target As Range) Event In Module After Creating A Sheet

Mar 27, 2009

Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?

View 9 Replies View Related

Data Validation Listbox Change Event

Apr 19, 2007

I have a Data Validation Listbox and I basically want to run a macro when a selection changed in the Listbox.

Does anyone have the code? I'm using Excell 2003.

I read this wasn't supported in 97 version but I haven't found an examples past this on the forum.

View 6 Replies View Related

Capture Cell Value Before Change Event

Mar 3, 2009

I am trying to capture the value of a cell before a change even. The attached Macro will report the value before the change but does not store it so that I can use it in another module. What I am trying to do is capture the value before the change and then look that value up in another worksheet (in the same workbook) so I can make the same change in the second workbook.

The values will always be in Column B and will always be string characters.

The code I am using for the change event is as follows: ....

View 8 Replies View Related

Get Previous Value Of A Cell In Change Event?

Oct 15, 2013

My favorite question in IT was, "Can you recover the file I did not save?" and now I am basically asking the same question.

I have headers on one sheet tied to fields on another sheet. If the user changes a header I would like to display a message that says, "The header you changed, 'OLD MESSAGE HEADER' will no longer match the value on the look-up sheet. DO YOU WANT TO CONTINUE"

If they say no then the old header is restored. Is this possible?

View 2 Replies View Related

Comment Change Event In A Cell

Apr 26, 2014

I want to write some code if a cells comment changes. Worksheet change doesn't fire if you right click a cell and edit the comment and save it. Is there an event that does fire when the comment changes?

View 2 Replies View Related

Worksheet Cell Change Event

Mar 6, 2007

I have looked at the threads concerning cell change events but cannot find a solution to my situation. I have a worksheet with a cell using a validation list. I wish to exicute a procedure whenever the dropdown list is changed in that one cell. Everything I have seen in the Worksheet event threads is evaluating the contents of a cell and I am attempting to exicute if the cell changes.

View 2 Replies View Related

Auto Color Change With Data Entry

Dec 6, 2008

Is there a way to make a cell change its fill color automatically whenever data is entered into that cell?

View 2 Replies View Related

Change Event Causing Event To Fire Again

Aug 7, 2006

I have the following code, which works perfectly:

Private Sub Worksheet_Change(ByVal Target As Range)

Dim TotalDays As Integer

TotalDays = Range("C65536").End(xlUp).Row + 1

The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.

However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.

How do I add the following, to my previous code?

Range("E8").Value = Cells(7, 6) * 2.5

View 9 Replies View Related

Change Event Based On Two Other Cell Values

May 8, 2007

myColumnOne = Range("NPN").Column 'this is column B, NPN is a Named Range of B1
myColumnTwo = Range("NPCH").Column 'this is column E, NPCH is a Named Range of E1

using these variables I want to say

When data is entered into any cell in myColumnOne
first check to see if this same data already exists in myColumnOne
if it does then check to see if in the row where the data already exists, if the corresponding cell in myColumnTwo ISBLANK then MsgBox

if the corresponding cell in myColumnTwo is not blank, allow the data to be entered.

Example:
Col B….Col E
ABC…..xxx
XZY….........

View 11 Replies View Related

Event Macro; Update A Cell When Change

Mar 31, 2009

I have not used an event macro before and am trying to one update a cell when changing a cell. I am basically copying a number to another cell that is an input for a calculation and then returning the calculated value back. How do I reference r69 in the code to start the event macro?

View 2 Replies View Related

Cell Formatting On Worksheet Change Event

Nov 22, 2011

I'm trying to create a worksheet change event macro that will change the colour of the cell when you update the value in that cell.

I have column C with 140 rows and when one of the cells in the column is changed by the user, I need the same cell to highlight in yellow. The highlight would then be removed once the user has acted on the change in the value, and that'll be done in another macro.

I understand I need a worksheet change event macro in the specific sheet and need the following code for yellow:

Code:
.Interior.Color = RGB(255,255,0)

, but any further I get stuck as it involves 'target addresses'

View 2 Replies View Related

Change Event Code To Run Macro When A Cell Value Changes

Mar 21, 2007

I have looked at a series of Change Event topics and code but can't see what I need. I simply want a macro to run automatically when a cell ....which contains the Maximum time from a range.... changes. I assume I use .... Private Sub Worksheet_Change(ByVal Target As Excel.Range) ...but I have no idea what code to use...

View 4 Replies View Related

Change Cell Color Upon Entry

Jun 2, 2008

I want the entire row to turn green if a value is added/changet in anya cell in that row. I got the basics, but the macro changes color on the cell that is selected after the input, that is if I change A1 I want A1:J1 to turn green, but what happens is i change A1 and then select B5 than B5 turns grenn, I have tried to modify my macro but can't get it right ...

View 4 Replies View Related

Worksheet Change Event Not Responding To Cell Deletion ...

Nov 13, 2008

I have a code where column K is not responding to a value being deleted out of column J. I've highlighted the portion of the code dealing with this. Deletion should trigger the worksheet_change event to clear out column K as it's supposed to. how to get deletion to take effect?

View 4 Replies View Related

Worksheet Change Event Not Responding To Cell Deletion

Nov 14, 2008

This is part of a macro in a worksheet_change event. When a cell in column J gets deleted by a user, the corresponding cell in column K should also clear. But it's not responding to the delete.

It DOES clear when the other 2 criteria are met (.cells(1,10) = 0 and .cells(i,5) <> "Annuity"). The worksheet_change event should pick up on the cell deletion, but it's not. And column J is already a trigger for the macro to run, so I'm not sure what's going on. Either the trigger is still wrong, the isempty(.cells(i,10)) is not correct syntax, or this event just doesn't respond to cell deletion.

View 6 Replies View Related

Spreadsheet Control (monitor For The Cell Change Event)

Jun 16, 2009

I have a spreadsheet control inside of a userform. I can generally access this spreadsheet and do what I need to do with it. My problem is that I need to monitor it for the cell change event. I normally accomplish this with:

View 4 Replies View Related

Worksheet Change Event Where Target Cell Contains Formula

May 23, 2007

I need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved