I have two large ranges of numbers stored as text.
I would like to compare first element from first one to each of the second, make a shortlist, and then further analyze the data on shortlist by some additional criteria.
After that the result is written to some place and the cycle continues with the second element from first range etc
Question:
Is it possible (in VBA) to create temporary arrays(baskets) where the fist set of data is analyzed and then after obtaining the result, array(basket) would be emptied and new sets of data is loaded and the cycle goes again?
I need to compare two colums by number decription for example m344 in one column and fsh344-1 in another. All I want to match is 344. In column a I want to indcate the match by placing an X by each match. View my attachment for reference. I don't know if it makes a difference but the columns are centered in my original spreadsheet.
I have two columns that each contain about 100 serial numbers. Most of the serial numbers shoud be in both columns. How to I determine if there is a serial number that is only in one of the columns and not in the other?
I have two numerical columns of different length. One presents the signal and another one the background. Most of the background numbers are found in the signal column but they are not exactly the same and not located in the same rows. The numerical values are the same within some tolerance that I can specify. What I am trying to do it to remove all the background values from the signal column.
I want to compare 3 columns of data across the same row with an IF statement to verify that all 3 numbers match. I would like the IF statement to only look to the first decimal place, rather than the entire number. In the first example, all columns equal. In the second example all columns equal only to the first decimal place. In either case, all 3 numbers would be equal when rounded down to one decimal place.
Example 1 Column A Column B Column C 84.5 84.5 84.5
Example 2 Column A Column B Column C 84.51 84.53 84.52
I have an If loop which looks like: If x < 54.5 And x > 52 Then
I have declared x as "Long", but still when it does the comparison it seems to round x up to the nearest whole number for the second comparison ( x > 52 ).
I have a worksheet with property numbers in colum A and first names in column B. Another worksheet has property numbers in A, first names in B, and last names in C (different order, all mixed up)
I want to put a formula in the first worksheet that will compare the property numbers and when it finds a match put the last name from the second worksheet into the first. Does that make any sense? I have tried vlookup but i'm obviously doing something wrong. example below....
# first last 123 x 124 y 125 z
another sheet looks similar but has info in the "last" column. the numbers between the two sheets are not in the same order so i need to search by number and put the info from the second sheet into the first.
The value stands for the Periodnumber and a Year so P1'08 stands for period 1 in the year 2008.
In cell H2 I want the following:
If value in cell H1 is the same as B2 or C2 or is in between these periods then the value in H2 should be the value of cell D2. If not the H2 should be empty.
I have a column of numbers (column A) which I'd like to compare to an adjacent column of numbers (column B) and, by row, determine if the number is larger.
If it is, I'd like to place a different colour on the cell. What is the formula I need to use to accomplish this?
Ex: Col A Col B 30,000 5,000 - A is larger than B, therefore A is formatted RED 20,000 20,000 - A is the same as B, therefore no format applied 10,000 15,000 - A is less than B, therefore A is formatted GREEN
I have 29 excel files with some number of worksheets from 1 to 4. The name of the worksheets are the same in all the spreadsheets. Then I've a got a pivot table. I have to compare some data (3 columns) from the pivot table to the numbers from all these sheets from 29 excel files.
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
I have two ranges of numbers stored as text on two different sheets. The first one is from product code and the second is from product category. The problem is both ranges are of different lengths and I have to find out if a product from the right is part of a particular product category. Even if the length is different the first digits are indicative of the belonging of a code. For example 1234 and 12345 are “family”-their first 4 digits match. Just to give you an example of what is desired:
So, the loop should do the following:Compare the first string from the “Category” column to each and every entry on the right, if a match exists (we have no match here for 2200) write “ok” next to it. Next trim one digit from the right from every string in the “Code” column. Compare same first string from the “Category” column to each trimmed string from “Code” column (here we should have a match 2200=2200) Write “ok” next to it Now the loop goes to the second string from “Category” column and for this one we will have to trim 2 digits from the right of each string in “Code” column to achieve the result (2323=2323) and so on.
I need to compare the date from the user input and the date listed on excel. How can I compare it? Is it correct? lngCmp = Val( Cells(I, 31))
Dim lngBegin As Long, lngEnd As Long, lngCmp As Date, lngResults As Long lngBegin = 9 'beggining of data lngEnd = 232 'end of data lngCmp = InputBox("Please enter the date", "Begining of the week")
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I have a text file with rows and columns of numbers ranging from 1-4 digits that I'd like to import/copy into Excel with each number being in its own cell. But whenever I copy/try to import, Excel splits all of the 3-4 digit numbers up into single digit numbers. The text file has 10,000+ columns (each number occupies two columns so I have half of that amount in numbers) and 300+ lines.
Is the file simply too large for Excel to handle or is there a way I can do this?
In the ID column of the attached excel file whenever I convert the numbers stored as text to numbers it results in a weird transformation.
e.g. an ID of 480610141001 becomes 4.8061E+11. When I do the same process in the name column, which has similar numbers, it will give the correct result following the same process.
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
Is there a way either by VBA or manually (preferably both, if possible) to actually unite the X amount of numbers that are in a cell given the contents is alphanumeric? I'll give you the following examples to see if you can understand what I' referring to?
DATA output should be asd67,h876 --------> 67876 2,3,ujdj5&34 -------> 23534 909k86m34 --------> 9098634
I have a column of variances, these contain both negative numbers and positive numbers. I want to gather a sum of all the negative numbers and positive numbers separtely. Basically saying all the positive overeages = this amount And all the negative shortages = this amount. you can see the attached sample.
