I have 2 lists. One column has a about 200 values of 7 digit numbers. The second column has about 500 cells with text. This text should include one of the 4 digit numbers from the first list. If it doesn't, I want to purge it.
The 7 digit numbers always appear in the same spot in the column 2 figures. So say the number I'm looking for is 1122 and the second list has a cell with L2871122BD. Perhaps there is an easier way to do this, but my plan was to.
create a 3rd column that has formula =mid(B1,5,4) which should isolate the 4 digit value i want to compare to. Then create a 4th column that has the formula =ISNUMBER(MATCH("*"&C1&"*",A:A,0)) to check the newly created MID number to the numbers in column one. Afterward I would simply arange from small to large and delete all of the false entries in column 2.
The only problem is, my ISNUMBER function doesn't work when referencing from my MID formula to column 1. If I do the match and compare the smaller number in column 1 to the larger in column 2, it does work. Is there an easier way to delete or highlight entries in Column 2 whose middle 4 digits don't show up in column 1? Here is an example of what I'm working with.
Is it possible to have a formula that generate a Unique list (List 1 and List 2) of Missing values in List 2 by comparing two lists? Something like this
List 1 List 2 Missing in List 2 1 1 3 3 4 6 5 5 6 6
I have two Excel lists. One master list (list A) contains all our email addresses from our customers. The other list (list B) contains a list of people who do NOT want to recieve emails. How do I take the emails from list B (there are 1,200 of them) and compare them automatically to list A? Basically if any email address from list B appears in list A, I want it to delete in list A.
I have two lists of data and am trying to write a formula that will return a "1" if the second list firstly contains one or more entries that are not in the first list and secondly the fourth cell on the same row of one or more of the entries not in the first list contains an "F".
The first list is in a sheet called "Select" cells J2:J7 and the second list is in a sheet called "Model" cells A2:A50. The second list will occasionally contain blank cells.
I have tried to use a combination of COUNTIF and VLOOKUP but am struggling to make any progress.
I have two lists in the same sheet. List one spread over 3 columns contains all the possible postcodes available to my job, the second list once again over 3 columns contains all the postcodes my job is currently using.
How can I find out the Postcodes that I am not currently using from the available list. I am sure it is a simple Lookup command, but cant for the life of me figure it out.
I have a worksheet that contains six columns (A-F). I am trying to compare the values found in column F (~50 values) with the values found in column E (~1500 values). Both columns contain unique values. The majority of values in Column F are contained within Column E. The goal is to run a function that returns all rows in column E that contain a value found in Column F. I've been trying VLookups and what not, but my overall goal is to match up all values found in Column F with the appropriate row that contains the same value in Column E.
I have a list of names, some of which occur several times, with values attributed to the names in the adjacent column. I want a list in which the names occur once and the all the values belonging to the name appear in the row the name is in. I have code which almost does it, but not quite.
My data looks like this example:
fred 10 dave 1 jill 4 fred 11 marc 74
I want:
dave 1, fred 10,11 jill 4, marc 74,
so I start with a list
dave fred jill marc
and then run my code.
My code is:
Option Explicit Sub Compare() Dim ws1 As Worksheet, ws2 As Worksheet Dim i As Long, j As Long, LR As Long Set ws1 = Sheets("Deutsch") Set ws2 = Sheets("Deutsch2")
It works fine for a while, then gives me an 'error 1004 object or application error' at always the same point, when it gets to row 144 in the destination list.
The editor tells me I should debug the line 'If ws1.Cells(i, 5) = ws2.Cells(j, 5)' in the second 'Do'-block in the code.
I'm trying to set a formula that will calculate the price difference between two identical items in two different sheets. The items' order is not the same and each list includes some different items along the identical ones.
I'm trying to compare two lists of songs to see which songs are not shared by both lists. I wrote a simple function to try to do this but ran into problems pretty fast. I want to create a function which will tell me if the song in a cell (lets say cell B2) is the same as any of the cells in Column A.
I have two lists of serial numbers which I want to compare to find those number which are not in both lists. I have used the following formula: =IF(A2=$G$2:$G$283,"",A2) where A2 equals the first cell in list 1, G2:G283 the range of the second list, true value "" false value display the contents of the original cell.
This works so far; where the contents in the A and G cells are the same on the row eg A2 and G2, but where they are different the contents of the A cell are being returned even if they are elsewhere in the range.
I'm trying to compare filtered lists across several worksheets. What I'd like to do is:
1) compare the filtered list from Sheet 1 with the filtered lists from Sheets 2-5, and if an item from Sheet 1's filtered list appears on ALL the other filtered lists, said item will be pasted to a new list on Sheet 6, under the heading "Sheet 1".
2) I need to do this for every item on every filtered list, ultimately creating five new lists on Sheet 6 (i.e. after going through sheet 1's filtered list, move on to sheet 2 and compare each item to Sheets 1, 3, 4, 5, and qualifying items pasted in Sheet 6 under heading "Sheet 2", etc.).
My boss has given me a spreadsheet to put together for him, unfortunately i am not really an expert on Excel and i am at a loss as to how to do this. This is what he wants:-
He wants to be able to cross check all the names in A with the names in F, and if any matches then also compare Column B with Column G. Again, if any matches then finally check Column C with Column H and pull the results
I would be extremely grateful if someone had an idea on this and could possibly give me a formula that could do this, or am i asking too much from Excel?
I have a list of names and a seperate list of names with emails.
In column A there is a last name, column B a first name, and then for the second list in column D there is an email.
I need to tell Excel that if column A and Column B both have a replication on the list, then in Column D populate it with the email address on the list.
I know this is confusing so I have attached a sample of my spreadsheet. The email address is in yellow and I need to have it copied to the cells in white. The list is almost 14,500 lines long and it would take forever manually.
I have two separate columns of text and want to identify similarities/matches. vlookup false is good for exact matches but vlookup true is too approximate - is there a way to hone vlookup true to match first 4 or 5 text characters rather than just the first? If vlookup no good for this what is best function for identifying approximate matches in two separate text lists?
I have two columns of email addresses. Column A is the roster of users' emails that we have been keeping; Column B is the list of email addresses pulled from the system.
I need to run a match to find out who from our list (Column A) does not have a registered email address in the system (Column B).
If I have a column with a list of items, and another column with a different list of items, how can I get excel to check/compare both list and return a value (eg. TRUE) if there is an item that is both lists, or a different value (eg. FALSE) if there isn't?
I'm currently working on sorting a column of data from a PDF file into separate columns to later compare to another sheet. I'm having a few problems getting the data into a workable format, and also don't know how to compare to the other file.
Ultimately, I want the data in columns that look like this: Name, City, State, Zip, $123.00, mm/dd/yy
Currently it looks like this:
A 1 Name 2 City State Zip 3 $123.00 mm/dd/yy
The sheets I'm working with are thousands of rows long, with these three rows of data repeating for every person. I have two problems with them, however:
1. I ultimately need each of those pieces of information into a seperate cell, in separate columns. I've been transposing the data then doing "Text to Columns" to get it from three separate rows in Column A to one row in Columns A, B, C etc.
The problem with this is the names aren't always uniform. Sometimes there's Mr. or Mrs. in front of them, sometimes they have a middle initial, or an "esq." behind them, which completely messes up the "Text to Columns." Is there a better way to break them up into separate cells?
2. Secondly, not all of the names are individuals- some are businesses or charities. I want to remove all of these (and the two lines of data that go with each of them), so I only have individual people. Do you have any idea of how to make excel know the difference between, for example, "Mr. John Smith" and "Smith and Sons Realty"?
3. Lastly Once I have all of this data spread out into the different columns (Last Name, First Name, City, State, Zip, Date, Amount), I need to compare it to another list. Basically, I've got one list of data configured in a similar way, and I want to identify any repeats between the two lists. I know that excel has a way to delete repeats, but what I need is a way to delete everything BUT repeats.
I have two different lists of names. One is about 3000 names long and the other has about 3500 names. I want to identify the 500 people that are not in the first list that are in the second. If there anyway to do this? I was going to put them in A-Z order and then go through and using an IF(A=B,"yes","no") and go through and insert new cell when ever it says no till it says yes BUT the functions start messing up when I insert a new row and it's taking way too long.
I am working on a project, I have three different lists that I want to compare and I want to identify in 3 separate columns which titles are found on which list.
For example:
Title List 1List 2List 3 ACAROLOGIA x ACCIDENT ANALYSIS AND PREVENTION x ACROCEPHALUS x ACS CHEMICAL BIOLOGY x x x ACS CHEMICAL NEUROSCIENCE x x x ACS COMBINATORIAL SCIENCE x x ACS MEDICINAL CHEMISTRY LETTERS x x ACS SYNTHETIC BIOLOGY x x x
From the attached file. Column 1 is a file name Column 2 is a list of file names (but some of the files have been split into -A and -B parts or suffixed with an A or B
I need to highlight in column B, if the exact file name in column A exists
Example: Column A: BSDS-0001 Column B: does not have this exactly instead it has BSDS-0001-A and BSDS-0001-B
I need some indication/highlighting that BSDS-0001 does exist on column B
So an indication that the whole of the file name in column A appears partially in column B. I have tried using max character lengths searches etc but cannot get an accurate way of doing this.
I have two seperate lists. One on Sheet 1 and One on sheet 2. What I need to do is take the list on sheet 2 and compare it to the list on sheet 1. If any of the items appear on sheet one, I need to delete those items form sheet 2.
So in the end the only items left on sheet 2 will be items that dont match any items on sheet 1
I dont know if it matters but the ROI is a very small decimal percent. However I found that when 2 properties get close the "Buy!" symbol dissapears from all cells. I have compared all the formulas and found no issues.
I have attached the file to this post
The issue occurs when 1750 is but in cell B12. I have narrowed the issue to cells A6 and A10.
Each petition can generate several tasks, one line per task.
John Doe | XXXX-YYYY | NCO John Doe | | RIL John Doe | XERT-WWWW | RMT Jane Doe | QSZE-AQWC | RIL
On the second worksheet:
Complete list of agents | number of petitions | Status
John Doe | 2 | OK Jane Doe | 1 | [BLANK]
I want to be able to fill in the second worksheet automatically. For each agent in my worksheet 2, I want to check if they appear in worksheet 1 and if so count the number of petitions related.
This formula gives a result of '1' even though it doesn't show an entire year.
I've also tried this formula:
=DATEDIF(B1,A1, "y")
This is more accurate as it formulates '0' as the result.
However if for some reason the 'Recent Date' in cell A1 is 5/5/12 and the 'Hire Date' in cell B1 is after the 'Recent Date', say 5/6/2012, the formula =YEAR(A1)-YEAR(B1) has a result of '0' and the formula =DATEDIF(B1,A1, "y") has a result of #NUM!.
Is there a formula that will give me accurate results whether the 'Hire Date' is before or after the 'Recent Date'? Maybe something similar to =DATEDIF(B1,A1, "y") but will give a result of '0' instead of #NUM!
I have a simple formula to compare dates but it isn't working. I am missing something obvious. Any help is appreciated:
IF(BB64=Current_Date,"Today","Previous"))
where Current_Date = today() BB64 = an array that is a feed from a streaming quote company: =ILX|Q!'f,Date' .
When I format this cell it looks exactly like Current_Date, but is displays "Previous". Somehow it is not doing an apples to apples comparison even though the values lookthe same.
I have attached a few rows of data: Current PositionCurrent Store FT MGR 212Proposed PositionProposed Store PT MGR 212
In the Curent Position Cell and Proposed Position Cell there is a list of the following options: FT MGR/PT MGR/FT ASST MGR/PT ASST MGR
Is there an IF, THEN formula that I can use to tell whenever the FT equivalent or PT Equivalent shows, AND the current and proposed store is the same, then "NO ACTION REQUIRED"
I was trying to send this as an attachment but I don't see that option
I have the need within a spreadsheet to automatically compare the value of 2 cells and if they match exactly to move the cursor to a group of cells. If they do not match then move to another group of cells. The only way that I can see to do this is via Macros. However I still need to do the automatic compare first.
1. Sheet1; how to Add "B000" in the List A or "B00" if the digits and 5 in the list 2. Sheet2; how to remove "B000" or "B00" from the list 3. Sheet3; how to highlight difference or find out the difference between to lists
