I have a simple formula to compare dates but it isn't working. I am missing something obvious. Any help is appreciated:
IF(BB64=Current_Date,"Today","Previous"))
where
Current_Date = today()
BB64 = an array that is a feed from a streaming quote company: =ILX|Q!'f,Date' .
When I format this cell it looks exactly like Current_Date, but is displays "Previous". Somehow it is not doing an apples to apples comparison even though the values lookthe same.
This formula gives a result of '1' even though it doesn't show an entire year.
I've also tried this formula:
=DATEDIF(B1,A1, "y")
This is more accurate as it formulates '0' as the result.
However if for some reason the 'Recent Date' in cell A1 is 5/5/12 and the 'Hire Date' in cell B1 is after the 'Recent Date', say 5/6/2012, the formula =YEAR(A1)-YEAR(B1) has a result of '0' and the formula =DATEDIF(B1,A1, "y") has a result of #NUM!.
Is there a formula that will give me accurate results whether the 'Hire Date' is before or after the 'Recent Date'? Maybe something similar to =DATEDIF(B1,A1, "y") but will give a result of '0' instead of #NUM!
I've hit a major brick wall and hoping someone will be able to help! I've written an array formula to replace a pivot table (long story) anyway, they now want to be able to filter the data by date (between two dates) i'm using the current formula:
{=SUM(IF('SAP Data Current'!$A$2:$A$39802='Payment Block by Ac. Clerk Cal'!$B$84,IF('SAP Data Current'!$I$2:$I$39802='Payment Block by Ac. Clerk Cal'!$C101,IF('SAP Data Current'!$B$2:$B$39802='Payment Block by Ac. Clerk Cal'!S$2,'SAP Data Current'!$AA$2:$AA$39802,0),0),0))}
I know I need to put it at the beginning, but not sure how! I have the following formula for between dates:
I am trying to run an array formula to match two dates on two seperate sheets as close together based on another cell. Below is what I currently have on some made up values. I am entering it as an array and ideally I would like it to run down the cells changing the reference A2 depending on which cell it is then to then enter this into a macro.
I am trying to find compare the value in one cell with an array of cells. My problem is when I try to carry the formula down to the next line - my array changes as well. For example:
Before After 01915
[Code].....
So, if Before is Column A and After is Column G, the formula I have right now is =INDEX(A2:A3349,MATCH(G2,A2:A3349,0)). When I try carry the formula down to G3, G4 and so on, the array changes as well.
How to compare two dates in excel. Like my requirement is I need to compare curent date vs from month begin date two weeks date.As of now I have tried like this.
Current Date : =TEXT(NOW(),"d") Month Begindate : =TEXT(DATE(YEAR(NOW()),MONTH(NOW()),1)+14,"d")
And I have written condition like this : =IF(TEXT(NOW(),"d")
I have a comments field in a reporting SS that I need to flag when the last comment is over a week old. The date however is entered into the same cell as the comment and the latest comment is put on a new line in the same cell, ie:
13/02 - Jimmy met with Shirley to discuss project A 10/02 - awaiting meeting 07/02 - agenda issued
Now, if needed I can make the date complete to include the year, ie 13/02/2008.
Is it possible using functions to see if the date in this cell is over 7 days previous to the date in another cell, say J1?
I'm trying to determine if one date meets the criteria to be considered 'on time'. I have two columns: estimated completion date and completion date. I want to compare the completion date to the estimated completion date and if completion date is <= completion date but is NOT = 1/1/2099 then I met my date. I've tried this several different ways and problem is I cannot make it work.
When estimated completion date is 1/1/2099 'on time' should be 'no' When estimated completion date is not 1/1/2099 but is greater than completion date 'on time' should be 'no' When completion date is <= estimated completion date and estimated completion date is not equal to 1/1/2099 'on time' should be 'yes'
And I have a null date to deal with also but if I can satisfy the first 3 criteria I can manipulate the null values manually.
I need to set a format in which if I enter a num eg 15 on the Jan Column, format comes as "15-Jan" format or If i type 20 on the march column , it comes as "20-Mar" format
I would need it in Date format, because I would be comparing dates later on.
I’m attempting to find values that are within a band of .001 of the values of cells in columns L through O and searching columns B through I for values that meet the .001 criteria and copying the values to columns Q, R, S, and T respectively.
I mentioned the values in L, M, N and O are where the comparisons will be made and these values are tagged to a specific date in Column K. I need to find the dates in Column A that are in between the values of K and the cell beneath it. For example, in K4 I have a date of 10/3/99 and the next date I have in K5 is 10/5/99. I would then query Column A for the dates 10/06/99 (A4), 10/07/99 (A5), and 10/08/99 (A6). The values I need to find within the .001 band are in Columns B through I (B4:I6). Lastly, when reach the last value in Column K, query all values in Column A greater than last value in K and copy the appropriate values in B through I to Q through T.
Rules for copying data to Column Q, R, S, and T:
For Column Q- Find values in B, C, or D that’s within plus or minus .001 of M and copy the value of B, C, or D into Column Q of the same row.
I want to be able to compare a user-input date to dates in a column, and return 1 if the date in the column is less than the user input date, and 2 if it is greater.
Code: Dim TheString As String, ReportDate As Date TheString = InputBox("Please enter the date this report was run in mm/dd/yyyy format:", "What date do you want to enter?", "mm/dd/yyyy") If IsDate(TheString) Then ReportDate = DateValue(TheString)
I need to compare dates that include both the date and time of day, to find when the day changes.
I have a large list of dates (also includes the time of day in the same cell). There are specific values in the next column that correspond to that date. Some of the values that are too great and have to be changed. This I have figured out with some help from this forum. When a value is changed I need to add together all the values for the corresponding day, some could be above and some could be below.
This workbook is designed to prompt the user with inputboxes allowing them to enter a name, hyperlink a file to that name, and then a date. Next all the drawing names are read into an array and stored. Along with some minor sheet formatting, this is what happens when the button "Add Drawing" is clicked.
Next, when the button "Revise Drawing" is clicked, the user will be prompted with an inputbox for a drawing name. This name will be compared to the names in the array. If the name is found, the row containing that drawing will selected and the user will be prompted to update the hyperlink, then the "drawing date" will be moved to the right by one column, then the user will be prompted for another date replacing the date that was moved. The first sequence of commands or button works fine. The button "Revise Drawing" prompts the user with the inputbox requesting the revised drawing name, then develops the runtime error 1004.
I have made macro that works but I want to convert it to array and want change all dates with looping. I have used based on selection and dates to convert are not always in Column E
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
I have attached an excel sheet for your reference. I have particular debit values that are to be added between the dates. And Dates are also derived by formula based of payment term.
The ones I need to modify is Highlighted in Yellow. The values to be added is in "Customer Statement" and in H Column
These dates also have formula by which there are derived
-------------------------Current Ageing------------------------- Date Range
Bucket Amount Percent Start Date End Date[code].....
I am USing =SUMIFS('Customer Statement'!$A:$A,'Customer Statement'!$H:$H,"=" & E11) but does not work.
I have 2 lists. One column has a about 200 values of 7 digit numbers. The second column has about 500 cells with text. This text should include one of the 4 digit numbers from the first list. If it doesn't, I want to purge it.
The 7 digit numbers always appear in the same spot in the column 2 figures. So say the number I'm looking for is 1122 and the second list has a cell with L2871122BD. Perhaps there is an easier way to do this, but my plan was to.
create a 3rd column that has formula =mid(B1,5,4) which should isolate the 4 digit value i want to compare to. Then create a 4th column that has the formula =ISNUMBER(MATCH("*"&C1&"*",A:A,0)) to check the newly created MID number to the numbers in column one. Afterward I would simply arange from small to large and delete all of the false entries in column 2.
The only problem is, my ISNUMBER function doesn't work when referencing from my MID formula to column 1. If I do the match and compare the smaller number in column 1 to the larger in column 2, it does work. Is there an easier way to delete or highlight entries in Column 2 whose middle 4 digits don't show up in column 1? Here is an example of what I'm working with.
I'm working on building a workbook to track sales progress, and I'd like to perform an analysis on some of the data with regards to sales efficiency.
To simplify: Column A = Initial Contact Date (mm/dd/yyyy) Column B = Close Date (mm/dd/yyyy)
As an example, I would like to calculate the average number of days between the Initial Contact Date and the Close Date to calculate the average number of days in the prospecting cycle. Basically, the formula should function as AVERAGE((B1-A1)+(B2-A2)+(B3-A3)...) and so on for the entire column.
I know one solution would be to insert a new column that performs the subtraction between the two dates, and then I could AVERAGE this new column. However, I want to perform similar calculations to analyze the time period between other key milestones in the prospecting cycle - rather than have a lot of extra columns in my sheet, I was wondering if there's some type of array formula that will calculate what I need.
I have a table that shows a row of dates, a row of campaigns, and then a row of values I need to reference. I need to pull the values for a specific date and corresponding campaign.
For example, I need to pull the value for campaign 'notset' on 6/16/09.
I tried the following, but it would only work on the first and last campaign: ...
I delcare an array of dates and assign it with a function that returns an array of dates. Then I want to pass the result to a sub which takes an array of dates as a parameter. However, I am getting a type mismatch error on this line
I have the need within a spreadsheet to automatically compare the value of 2 cells and if they match exactly to move the cursor to a group of cells. If they do not match then move to another group of cells. The only way that I can see to do this is via Macros. However I still need to do the automatic compare first.
