# IF Formula- Comparing Height Vs Weight Standards Of Individuals

Jan 12, 2010i am trying to use the following formula in a cell. it is comparing height vs weight standards of individuals....

View 9 Repliesi am trying to use the following formula in a cell. it is comparing height vs weight standards of individuals....

View 9 RepliesADVERTISEMENT

I currently have a sheet of data with names and scores (1-10) on e.g.

NameScoreJohn10Smith5Steve4John9

and what i am wanting is a formula that will read these columns and tell me the amount of 1's, 2's, 3's, 4's, 5's, 6's, 7's, 8's, 9's and 10's the corosponding name has gotten.

for example:

JohnSmithSteve123415167891101

I have been playing around with COUNTIF formulas but cannot seem to work this out.

I'm trying to figure out how to write a formula to add up hours that were attended for various individuals. My data is coming in from scanning their barcodes, so I'd rather not manually add their hours. I have these columns: Date, Time, First, Last, Member ID, CEU. My hope is that I can take the Member ID and write a formula that adds up the CEU column.

This issue I'm having is how to deal with the variables of someone only attending two sessions, while another attends four? I'm not sure how to do this so I'm seeing if anyone knows if this can this be done?

I have attached a sheet that contains a pretty simple formula that helps me figure out the dimensional weight of a shipment. It is just a simple vlookup that returns the proper rate (Column H) depending on DIM Weight and Zone. It works great.

The issue I'm running into is with various exceptions that I need to put into the formula. The criterias that I need to put into the rate formula (Column H) are:

1-If the one of the Length (Column A), Width (Column B), and Height (Column C) is greater than 60 I need to add 7.50 to the the returned lookup value in Column H.

2-The second longest side the Length (Column A), Width (Column B), and Height (Column C) is greater than 30 I need to add 7.50 to the the returned lookup value in Column H.

3-If the grith (2x Column C + 2x Column B) is greater than 130 I need to add 45 to the the returned lookup value in Column H.

I'm working with a few IF formulas but I can't seem to get all of them to work at the same time. Does anyone have any thoughts?

calculate dimensional weight (below).

View 3 Replies View RelatedFinding the Column with the MAX Height in comparison with other Columns of UNEVEN Height

I need two things :

1. I have several columns starting from Column B till Column F, each column having values starting from the third ROW.

Ex:-

Lets say Column B contains two values in B3 and B4, Col C three values in C3 C4 and C5, Col D four values D3,D4,D5 and D6, Col E two values in E3 and E4, Column F five values F3,F4,F5,F6 and F7.

So, the answer is F3:F7.

2.I am using 10^{4,3,2,1,0} in a particular portion of a formula, Now the number of elements in the array or in the Curly Braces depends on the number of Columns filled from Column B as explained in the Point 1.

Now, since I have five columns under consideration I have this order as mentioned here {4,3,2,1,0} , I would like to know whether I could make this dynamic, as in if there were only four columns then this would be {3,2,1,0} and if more this array could self-fill and expand..

If that's possible, then how do we use it in the formula, Is it by the virtue of the INDIRECT function?

I am attempting to compare S1 & S2 (samples) to guideline values (guide1 and guide 2).

If Guide 1 value is exceeded I would like it highlighted and if guide 2 is exceeded I would like the same cell to be have the font colour changed.

The Sample values that have < signs are currently being highlighted as an exceedance. I'd like them to obviously not be highlighted as they are not an exceedance of the guideline values.Needhelp.xlsx

In my efforts to improve worksheet readability across the board at my work I am researching spreadsheet standards. I have found the Spreadsheet standards review board http://www.ssrb.org/index.html that has a massive document containing valuable standards to adhere to for financial modeling. Since I learn best by example, I am wondering what standards any of you guys are using and if possible post a sample spreadsheet containing those standards.

View 3 Replies View RelatedI need a formula to calculate the height of a cell. Basically I will repeat this formula thoughtout the database, and each cell in column U will have its row height.

have come up with the following

Function RangeHeight(rng As Range) As Double

RangeHeight = rng.Height

End Function

Now, the problem is, that the formula does not automatically update when the row height changes, and when I open the file on another pc, all the formulas change to #NAME since it does not recognise the custom formula.

I want to plot a graph where our customers can compare their results against our standards. (line graph) This has been easy in the past but rather than just having a single value as the standard we now a range for each standard a minimum value and a maximum value. How can i get both the minimum value and the maximum value plotted on the chart? This would be two lines with the area between the standards shaded in. The customers could then plot their results to compare against our standards?

View 1 Replies View RelatedWhen I open Excel 2010, the formula bar appears about 6 times as tall as normal. I have not been able to find any way to reset it to normal size.

View 11 Replies View RelatedI have a schedule sheet (on week days what assignment is be to taken in concerned period).

I need a report based on the same. i.e. I need to generate a report for each individual.

I have attached a sample file, in which I explained the requirements.

I've a sheet that records performance on individuals, what it does is collate the performance daily on certain things.

Most are simple plus/minus one and i have control buttons that do this,what it does is: On click it adds one to a different sheet, or if to remove it minuses one, and there is a total box to sum these figures.

But there is also some provision to add collected money value, and what i would like to do is have a function that deletes the last figure added to the financial transactions

This is the code

If Target.Address = "$A$6" Then Sheets(2).Range("A65536").End(xlUp).Offset(1).Value = Target.Value

So for example

in A6 £10.50 is added, but i can't think how i can provide a service that will delete the last figure in Sheet 2 range A, as this will be constantly changing.

I have monthly a list of 2,500 people with an allowance value for each individual shown.

Problem I got is that sometimes there is more than one allowance entry for the individual in each month. I just need the total for the individual in that month. Each month is on a separate worksheet. I have been racking my head, but I can’t figure how I can look at the list of people (who have a unique number) and just total it.

I am looking for a formula that calculates an individuals exact age given their date of birth. That shows just the age in years.

View 9 Replies View RelatedI am using a pivot table to explore the relationship between the two variables in a survey. Question 1 is a "choose all that apply" question, while Question 2 is more "if you said yes to any in question 1, choose all that apply".

So, I have about 10 filters for question 1, where each combination will give me a different number for the responses for question 2. My question is this: How do I get excel to automatically find the # of individuals with the particular combination of filters in question 1?

Ie. if said yes to 3/10 options in question 1, how do I get excel to find out how many actually said yes to the 3/10 questions.

The purpose of this data is for reference to question #2, so that i can utilize some percentages.

Formula for comparing two dates

Cell A1 = 5/5/2012 (Recent Date)

Cell B1 = 5/6/2011 (Hire Date)

Cell C1 = =YEAR(A1)-YEAR(B1)

This formula gives a result of '1' even though it doesn't show an entire year.

I've also tried this formula:

=DATEDIF(B1,A1, "y")

This is more accurate as it formulates '0' as the result.

However if for some reason the 'Recent Date' in cell A1 is 5/5/12 and the 'Hire Date' in cell B1 is after the 'Recent Date', say 5/6/2012, the formula =YEAR(A1)-YEAR(B1) has a result of '0' and the formula =DATEDIF(B1,A1, "y") has a result of #NUM!.

Is there a formula that will give me accurate results whether the 'Hire Date' is before or after the 'Recent Date'? Maybe something similar to =DATEDIF(B1,A1, "y") but will give a result of '0' instead of #NUM!

I have 2 lists. One column has a about 200 values of 7 digit numbers. The second column has about 500 cells with text. This text should include one of the 4 digit numbers from the first list. If it doesn't, I want to purge it.

The 7 digit numbers always appear in the same spot in the column 2 figures. So say the number I'm looking for is 1122 and the second list has a cell with L2871122BD. Perhaps there is an easier way to do this, but my plan was to.

create a 3rd column that has formula =mid(B1,5,4) which should isolate the 4 digit value i want to compare to. Then create a 4th column that has the formula =ISNUMBER(MATCH("*"&C1&"*",A:A,0)) to check the newly created MID number to the numbers in column one. Afterward I would simply arange from small to large and delete all of the false entries in column 2.

The only problem is, my ISNUMBER function doesn't work when referencing from my MID formula to column 1. If I do the match and compare the smaller number in column 1 to the larger in column 2, it does work. Is there an easier way to delete or highlight entries in Column 2 whose middle 4 digits don't show up in column 1? Here is an example of what I'm working with.

I have a simple formula to compare dates but it isn't working. I am missing something obvious. Any help is appreciated:

IF(BB64=Current_Date,"Today","Previous"))

where

Current_Date = today()

BB64 = an array that is a feed from a streaming quote company: =ILX|Q!'f,Date' .

When I format this cell it looks exactly like Current_Date, but is displays "Previous". Somehow it is not doing an apples to apples comparison even though the values lookthe same.

A

B

C

D

E

9

et Boxes

Gross Weight

Ice Weight

Box Weight

Net Weight

10

Box 1

60

5.5

4.5

50

d10=IF(B10>=1,4.5,0)

[Code] .......

I am trying to create a weight chart, which works in stones, pounds and ounces. My first query is that each time I enter the weight in for each day, I need it to deduct 1ib 4oz from the weight I enter. At present I have seperate columns for stones, pounds and ounces. However, if I try to do a simple lbs minus 4 it doesn't work, because sometimes the pounds are less than four - so instead of taking the stone column down by one and then deducting the remaining pounds, it just puts the pounds columns to -3 or similar.

Also, I would like my table to work out weight lost over a period of time - so, I have my starting weight at the top and then I want my most recent weight to be taken from the starting weight, leaving weight lost - I can't get this to work either. Is there a way to make it so that the calculation uses the most recent weight entry and does so automatically?

If anyone has any solutions to these queries, I would be very grateful...as I have to caculate this for a number of people and it would be much quicker if it did it all automatically upon entering the most recent weight.

I have some aged data, as follows

325days - $225

20days - $2,725

16days - $27,250

11days - $8,175

Now, if I just take the average number of days ((365 + 20 + 16 + 11) /4) I get 93.0days

However, I want to high value days to carry more weight, than the lower value days.

I gave each set of data a weighted score by dividing the value by the total value, i.e.

$225 / $38,375 = 0.006

$2725 / $38,375 = 0.071

$27,250 / $38375 = 0.710

$8175 / $38375 = 0.213

I have 1 spreadsheet in which I need to calculate the % weight of some numbers. Columns A to G have data I do not need for the calculation.

Column H has the numbers of whose % weight I need to calculate. The problem is that the no. of rows containing the numbers can change from week to week and I am trying to automate the calculation of the % weights.

So I want try to use column G (as a reference) (like go at the bottom of it so I can know how many rows of numbers there are) and then calculate the % weights.

I have the need within a spreadsheet to automatically compare the value of 2 cells and if they match exactly to move the cursor to a group of cells. If they do not match then move to another group of cells. The only way that I can see to do this is via Macros. However I still need to do the automatic compare first.

I have two columns. One with the major weight(pounds and one with minor with ounces. The first column would have a 1 the second 8 for 1 lb 8 ounces which I need to combine to say 1.5 Every way I do it it is coming up with 10.5.

View 5 Replies View RelatedHow do I track my total weight loss in excel? Here is an example of what I am trying to do.

8/1/2008 228lbs

8/2/2008 225lbs

8/3/2008 223lbs

Total 5lbs

I would like use a formula that would subtract my absolute weight loss total day by day in August. Basically, I want the total "cell" to equate to my total weight loss in August. For Example after 8/3/08 the "total cell" should equate to 5 lbs. What formula do I use to do this?

I cut alphabet letters out of MDF. I need to calculate the total weight of any letter.

I have a program that will give me the area of any shape. In the picture below I have started with the letter “A”. B7 is the over all area. D7 is the small triangle. G7 is the total area minus the triangle D7. H7 is the thickness and I7 is the total volume.

The weight of my MDF I have set at is 850kg cubic meter. That’s set in A3.

I need the total weight of the letter in J7 to be in grams.

The idea is, I put in the areas and set the thickness and it gives me the total weight.

I'm trying to make a points calculator and tracker for a diet.

I have the forumla from wikipedia and it calculates the point now I want to record the date, food, meal & Points on a second sheet.

I enter that data in

E1 =Date

E2 = Point (calculated)

E3 = Meal (Breakfast, Lunch, Dinner Etc)

E4 Food (text)

E6 Calories (number)

E7 Saturated Fat (number)

I want to add a button that records this data to another work sheet and clears the inputs I have made.

The following Date should be carried across

E1, E2, E3 & E4 into A2, B2, C2 & D2 (or the next available row)

The following Cells should be cleared (E1, E3, E4, E6 & E7)

Hi there, been using this for a number of years now, but never had to post a question - I guess most things are already answered - but this one is a bit more tricky.

I want to calculate a totals and a weighted average based on months from a data set that has duplicate ID's and variable data (attached example).

I would like to calculate the total tonnes by month and the average grade of those tonnes. Using the 'month ID table' as a reference to the 'Raw Data table'.

Is this possible using if and vlookup functions or will require a higher level of programming knowledge?

I have a Weight Watcher spreadsheet. I enter the Calories, Fat and Fiber and I get the # of points for that food. Then I keep put those points into the lower part of the spreadsheet where I track what I eat, and Excel does my simple math for me. What I want to do is keep a list of my foods, and their point value in my spreadsheet. I would like to be able to put the food name in Cell A1, the WW points in BI, and then be able to click a button with a macro that takes those two pieces of data and add them to bottom of my food list. I don't have a food list yet, I would assume I can just put it on sheet 2. I then want to be able to use lists in my cells to choose the food in the future. I need to be reminded how to make "dynamic named ranges. Today, I just need to know how to write the macro to copy and paste those two cells in the first open row at the bottom of my food list.

View 9 Replies View Related
Copyrights 2005-15 www.BigResource.com, All rights reserved