This macro is part of the Pertmaster Risk Expert Application: It was not created by me nore modified by me, it is part of the PertMaster Risk Expert Software:
I am trying to run the Convert Lags To Tasks Macro Ver. 1.3 but i keep getting the following Error Message: Compile error: Method or Data member not found
Here is the list of the codes for the macro: I have not change any codes from the original pertmaster file....
If Sheet6. Range("O8").Value = 4 Then For Each cell In Sheet10.Range("B5", "B369") If (cell.Value = Sheet6.Range("L24").Value) Then cell.Offset(0, Sheet6.Range("L21").Value).Value = Sheet1.ActiveCell.Value End If Next cell End If
it says the part of code causing the error is the end of the 'cell.offset' part, as highlighed: Sheet1.ActiveCell.Value. i tried replacing it with '.Selection', still get the same error.
I have designed ad workbook with a lot of combobox. The cbo are partly controlling other cbo. The sheet works perfekt and in the code they are handled as intented. So no mispelling of any cbo or sheetname. Where I get my problem: If the workbook is open and I close Excel then I get the "Compiler error: Method or data member not found". But if I close only the workbook I don't get any Compiler error. It is as if the problem is caused by a Excel problem - If Excel is closed the sheet is recalculated but closed and there fore ends in compiler errors.
This error is in Excel 2000 + 2003 + 2007 - so not version related.
I have been searching the net for a solution for this problem but havenīt had any luck so fare. I starting to believe that there is no solution to this proboem.
Private Sub UpdatePrice() Sheet1.Range("E4").Value = Sheet2.Range("B1").Value + Sheet1.ComboBox1A.Value End Sub
I can call it in Excel and it works no problem. When I close the workbook, I get the following error: "member or data member not found" with ComboBox1A highlighted in blue.
Is there any reason why I would get this only when I close the document?
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR: NAMED ARGUMENT NOT FOUND
Sub HPVAL() Dim r As Range, myStr As String myStr = "HP" Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _ :=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _ False, SearchFormat:=False) If Not r Is Nothing Then r = r.Value While Not r Is Nothing Set r = Cells.FindNext(r) If Not r Is Nothing Then r = r.Value End If Wend End If End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
I have currently written a macro in excel 2003, it doesn't run on excel 2007, or some versions of 2003, I realize this is due to missing references, I was curious if there is any way to write code to actually prompt or install these references using VB. This way novice users can use the macro by themselves.
At the moment it fails on code such as
ans = MsgBox("??", vbYesNoCancel, "Title") saying ans is not found "Compile Error: Project or Library cannot be found"
I can avoid these errors by dimensioning everything as a string or variant. BUt doing this will use more memory which is not desired at the moment as it sometimes exhuast available memory on some machines.
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
The error is: Method 'Range' of object '_Global' failed Line it fails on:
Set r = Range("myRange")
Sub LearnCells() Dim r As Range Dim n As Long Set r = Range("myRange") For n = 1 To r.Rows.Count If r.Cells(n, 1) = r.Cells(n + 1, 1) Then MsgBox "Duplicate data in " & r.Cells(n + 1, 1).Address End If Next n
End Sub Questions:
1) 1st Dim statement, is this valid? I still get a little unsure- in the data type lists in the help file, the list file does not list things like Workbook, Worksheet Range. 2) Why is the error ocurring?
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6() Cells.Select selection.Copy selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
For which I get 'Compile Error - Expected Function or Variable'
I am looking for a more efficient way to write a macro (a sample from the macro is below). This is just the first part of the macro. I need to repeat these same steps (seen for row 5 below) for rows 5 to 50. My script worked until I hit row 35 and then I got the "compile error.." message. There must be a way to use "loop" to write this more efficiently, no?
My worksheet contains several codes that I then have to lookup in a different worksheet in a different workbook to obtain the relevant data associated with that code. At present I do this by activating the appropriate worksheet, Using Find to locate the appropriate field in that worksheet and then using activecell.offset to get the needed data. This is the only time that these worksheets ever need to be activated so I was wondering if there is a way to do this without having to actually activate the sheet. As an exapmle this is what I currently do:
' variables defined earlier in the program, Tempsheet = workbooks(FileNm & ".xls").worksheet("Temp")
Spark = Cells(TRow, 8).Value ' Activate the reference Sheet Workbooks("Waveguide Properties.xls").Worksheets("Spark Bends").Activate Cells.Find(What:=Spark).Activate COM = ActiveCell.Offset(0, 2).Value Edge = ActiveCell.Offset(0, 3).Value SparkArray(i, 1) = ActiveCell.Offset(0, 1).Value SparkArray(i, 5) = ActiveCell.Offset(0, 4).Value SparkArray(i, 6) = Spark ' Reactiave the workbook and worksheet I am working in TempSheet.Activate
I get an error message on the "Range(lstRow).Select line. (Method 'Range' of Object '_Global' failed). My goal is to transfer a specific range (C24:H24) to the first available row in Data Entry sheet.
how I can have excel determine what array or predetermined group a piece of data belongs to as it loops through it.
For example...
Say I import the A column via .csv file, I want to then run a macro that recognises the data and then catergorise it... the desired outcome would be the red text in the C column.
I want to be able to added the variable members to each group as such, I'm presuming this is best by a declaration.
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox. the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0) If Not IsError(res) Then
I am using the following code to put a combo box in my userform. When I try to run it I get the following Compile Error: For without next. What does it mean and how do I fix it?
just make some files to make my work easier. Few too many watching the game last night, and I think im lost here. Am I attempting to do too much here ? I ran the first For statement Fine, but I cant get the second to work. I dont understand where my next statement should be entered.
VBA but familiar with other programming languages.
I have looked through previous posts with the same problem and I see that most people forget to add the "endIf" before looping. From what I can tell, I have ended all of my "If" statements.
The goal of this macro is to take temporary data and finding a match in other sheets and copying from "Temp" and pasting into the other sheets (possibly in the first blank cell, depending on the case) then deleting the row and moving on to the next row and repeating the process until "Temp" is empty.
Every time I wrote something wrong I stupid and annoying pop windows appears and I have to press ok different times and be quick to correct the problem, otherwise it appears again.
I'm trying to write a macro that will insert a excel formula into a specific cell. When I try to run the macro I receive a compile/ syntax error. I don't understand why as the formula works in excel. Here is the code (formula only)
I have an application that will require I create 20+ objects from a class I have created call "cWorkCenter." This is my first project using objects in VBA. I've created a string variable called "Title." THe application will loop through a list of resources on a worksheet, assign the name of that resource to the variable called "Title" (eg. Title=Range("A1")), then create an object named whatever the string is that "Title" represents. For example, if the first item in my list is "Resource1", then the first object created should be called "Resource1"
When I do this I get the following error: Compile Error: Duplicate declaration in current scope.
Below is the part of the code giving me trouble.
VB: Public Title As String Sub Loader_OO() Title = "Resource1" [code].....