Private Sub UpdatePrice()
Sheet1.Range("E4").Value = Sheet2.Range("B1").Value + Sheet1.ComboBox1A.Value
End Sub
I can call it in Excel and it works no problem. When I close the workbook, I get the following error: "member or data member not found" with ComboBox1A highlighted in blue.
Is there any reason why I would get this only when I close the document?
trying to convert an excel document to an XML document and am getting the above error. Microsoft Visual Basic highlights below.
Code:
' prompt user to save to a directory
With frmAuthenticate.dlg
.Filter = "XML Files |*.xml|"
[Code]....
I have designed ad workbook with a lot of combobox. The cbo are partly controlling other cbo. The sheet works perfekt and in the code they are handled as intented. So no mispelling of any cbo or sheetname.
Where I get my problem:
If the workbook is open and I close Excel then I get the "Compiler error: Method or data member not found".
But if I close only the workbook I don't get any Compiler error.
It is as if the problem is caused by a Excel problem - If Excel is closed the sheet is recalculated but closed and there fore ends in compiler errors.
This error is in Excel 2000 + 2003 + 2007 - so not version related.
I have been searching the net for a solution for this problem but haven´t had any luck so fare. I starting to believe that there is no solution to this proboem.
This macro is part of the Pertmaster Risk Expert Application: It was not created by me nore modified by me, it is part of the PertMaster Risk Expert Software:
I am trying to run the Convert Lags To Tasks Macro Ver. 1.3 but i keep getting the following Error Message: Compile error: Method or Data member not found
Here is the list of the codes for the macro: I have not change any codes from the original pertmaster file....
If Sheet6. Range("O8").Value = 4 Then
For Each cell In Sheet10.Range("B5", "B369")
If (cell.Value = Sheet6.Range("L24").Value) Then
cell.Offset(0, Sheet6.Range("L21").Value).Value = Sheet1.ActiveCell.Value
End If
Next cell
End If
it says the part of code causing the error is the end of the 'cell.offset' part, as highlighed: Sheet1.ActiveCell.Value. i tried replacing it with '.Selection', still get the same error.
I'm getting a compile error whenever It gets to the .leftmargin line...its the "method or data member not found" compile error
With ActiveSheet.PageSetup
.PrintTitleRows = ""
.PrintTitleColumns = ""
End With
ActiveSheet.PageSetup.PrintArea = ""
With ActiveSheet.PageSetup
.LeftHeader = ""
.CenterHeader = ""
.RightHeader = ""
.LeftFooter = ""
.CenterFooter = ""
.RightFooter = ""
When I comment the margin stuff out, everything else is forrmated correctly, the landscape and all. It really doesn't that "application to inches."
how I can have excel determine what array or predetermined group a piece of data belongs to as it loops through it.
For example...
Say I import the A column via .csv file, I want to then run a macro that recognises the data and then catergorise it... the desired outcome would be the red text in the C column.
I want to be able to added the variable members to each group as such, I'm presuming this is best by a declaration.
i need a command to remove (delete) a member of a collection by its key. Something like: SomeXCollection.Remove 2213acv (where 2213acv is the key property of certain SomeXCollection member object) but this syntax (i found in Excel Help), doesn't work to me.
View 3 Replies View RelatedWhen I open a spreadsheet I get the following message
Excel found unreadable content in Book_Name. Do you want to recover the contents of this workbook.
All the information I find says:
This issue occurs if the following conditions are true:
The workbook contains a PivotTable that uses key performance indicators (KPIs).
The KPIs are created in the Analysis Services Business Intelligence Development Studio.
One or more of the KPIs have an expression in the Current Time Member property.
and the fix is : To resolve this issue, remove the expressions from all Current Time Member properties.
My issue is - the spreadsheet with Pivot tables is supplied to me. I am using Excel 2007 - how to remove the expressions?
When I do this on another machine same version of excel I have no issue.
I have a table arranged by columns into SETS of results. I am looking for a way to mark all the columns of a set as false if any one column of the set is false.
View 4 Replies View Relatedthe if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
The error that pops up has no information other than "File not found" in a dialog box with two buttons.
File not found (Error 53)
The file was not found where specified. This error has the following causes and solutions:
A statement, for example, Kill, Name, or Open, refers to a file that doesn't exist.
Check the spelling of the file name and the path specification.
An attempt has been made to call a procedure in a dynamic-link library (DLL) or Macintosh code resource, but the library or resource file name specified in the Lib clause of the Declare statement can't be found.
Check the spelling of the file name and the path specification.
In the development environment, this error occurs if you attempt to open a project or load a text file that doesn't exist.
Check the spelling of the project name or file name and the path specification.
For additional information, select the item in question and press F1 (in Windows) or HELP (on the Macintosh).
I have a macro which prepares a report for equipment. The macro is a recorded macro and it runs perfectly on my system but when i am trying to run that in other system getting an error message"Error 448:arugument not found".Which i marked in red.
My macro code is as follows:
Sub Anirudha()
Application.ScreenUpdating = False
Range("G2").Select
ActiveCell.FormulaR1C1 = "=MID(RC4,4,6)"
Range("G2").Select
Selection.AutoFill Destination:=Range("G2:G931")
Range("G2:G931").Select
Range("A2:F2").Select
I am trying to open an Add-In file (that I wrote) and I am now getting the following error "File Not Found". I am sure it has to do with a typo in the code or something.
However, I cannot get anything to open up so that I can see the VBA code. The spreadsheet itself does not contain any data, just the VBA project.
how I can get at the code to fix it?
I tried to upload the file, but it is too big for the requirements.
I have a worksheet with several option buttons and until yesterday, I had no problem selecting them. But today, every time, I select a radio button, an error shows up stating "Cannot run Macro "Option Button_click. Macro is not available in this workbook or is disabled". When the user selects a radio button, text appears in Col B depending on what button was selected (using VLOOKUP). That stuff is still working fine. It's just as soon as I click a radio button, the error shows up.
Based on the radio button selected, user can add in information to the columns adjacent to it, and then click a button to store that information in some rows below. The code for that button is stored in the sheet module. I have tried enabling macros and disabling macros and no change has appeared. What I have noticed though is that yesterday, when i opened the workbook, a yellow bar appeared asking if I wanted to "Enable Content". Today, that bar didn't appear.
Anyone ever seen this error “File not found: VBA6.DLL” ?
This error happens when I press a button I’ve created in the sheet. Funny thing is that there are other buttons right beside this button and they all work just fine. I’ve checked the code and names of all the macros in the sheet.
I’ve recreated a different module and renamed the macro and attached the code to another button.
I manage to do a proper search and the return value is correct, but the problem is when I don't get the correct value excel gives me an error, what I can add to make the result just to give me MsgBox "Not found"?
Code below:
Set Ran = Worksheets(2).Range("A:A").Find(CompName, lookat:=xlPart)
If Not Ran Is Nothing Then
MatchRow = Ran.Row
MatchCol = Ran.Column
End If
I am getting a "Runtime Error 53 - File not Found" with the below code. I am trying to move xml files from one folder to another. The file exists as my other macro can access the xml files and extract the info. But I can't get the macro to move them! Removing the last slash in the folder address hasn't worked either.
HTML Code:
Public Sub move()
Dim MyFolder As String
Dim NewFolder As String
Dim MyFile As String
[Code] .............
I'm trying to write some VBA which will allow me to find certain instances of data across a number of different sheets and copy this into another sheet.
However if the sheet doesn't contain the data I'm searching for an error pops up and the macro dies, is there a way to search where if the macro doesn't find anything it skips to the next line?
I am new to VBA and created the following code:
Sub UpdateSchedule()
'
' UpdateSchedule Macro
' Save changes to schedule, create import table for MRP, and timestamp.
'
' Keyboard Shortcut: Ctrl+Shift+U
[Code] ...
When I run it it tells me that "No cells were found and the debugger highlights the following line of code:
Range("Import[FG GP'#]").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
I have tried inserting:
On Error Resume Next
Range("Import[FG GP'#]").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
On Error GoTo 0
This makes everything work except the deleting.
Private Sub Worksheet_Activate()
Sheets("Search Inv").Protect UserInterFaceOnly:=True
ActiveSheet.Range("A17:F37,C39:C42,F39:F42").Select
Selection.SpecialCells(xlCellTypeConstants, 23).Select
Selection.ClearContents
End Sub
Above is meant to clear the contents of cells that contain formulas while keeping the formulas.
The sheet is protected ... no password
What is wrong ... when I activate the sheet I get: Run Time error 1004 / no cells found
(All cells that are meant to be cleared are selected ... they just don't clear)
I wrote a program in Excel that calls a form to load when an action happens on a spreadsheet page, the code I used to call the form from is
sqe_portal.UserForm_Initialize
however since upgrading to MSoffice 2003 i get the runtime error '53' file not found. the files still their...? any ideas?
With this macro i print nine sheets. If there is one missing, excel gives a warning that the document cannot be found. I want excel to go ahead with the following document.
View 4 Replies View RelatedIf lookup doesn't find a match in the first column, can I get it to return an
"ERR" or "0", something that would let me know there was no match? Right now
it returns the value in the second column of the closest value.
This macro starts out looking for the first non blank cell by looking down about a hundred cells and then going back up till it finds the first non blank cell. When it finds the first non-blank cell it goes up 1 row and adds 1 to the number for the next row. It works fine the first time then, after the file is saved it will stop the macro with the following message; Run-time error ‘1004’ No cells were found. If I format the cells in question, the macro works again until I save the file, then it happens again.
Excel 2003 11.8220.8221 SP3
I think there is a hotfix for this but I can't get it to install. Is there a way around this?
This is the portion of the code that gets the error:
Range("A11:A100").Select
Selection.SpecialCells(xlCellTypeBlanks).Select
ActiveCell.FormulaR1C1 = "=+R[-1]C+1"
when I try to do this:
Private Sub Workbook_Open()
UserForm1.show vbnomode
End Sub
I get one of those "Excel has found an error and needs to close......"
and it crashes down
I am getting the following run time error when trying to use MoveFolder from the scripting runtime library:
run-time error ‘76’
path not found
The source and destination paths are picked up out of cells and I think the spaces in the name or the length of the path names may be causing the problem.
The source folder looks something like this (contains 50 characters):
K:Example123 Folder1AB CD ESubfold,XX abcdefgh
The destination folder looks something like this (contains 60 characters):
K:Example123 Folder1XX New123AB CD ESubfold,XX abcdefgh
The code is pretty basic:
Sub MoveFolder(Sourcepath As String, Destinationpath As String)
Dim FSO As Scripting.FileSystemObject
Set FSO = New Scripting.FileSystemObject
'some code here removes the trailing backslashes on the
'end of the pathnames
FSO.MoveFolder Sourcepath, Destinationpath
End Sub
I have double checked the source path name exists. I have also tried doing it manually with the path names being entered in as text but i keep getting the error.
I have error trapping in place so if a find in a column returns no data the procedure continues, but the code breaks there anyway.
In Tools/Options/General/Error Trapping I have Break on Unhandled Errors checked.
I have changed my error trapping lables.
I have copied the procedure and renamed it.
I've got an interactive chart on a sheet where users select a chart from a combo box control and a picture link to the chart is displayed. The actual charts are on a hidden sheet. I have to activate the charts first for it to work so I put a button the sheet and recorded a macro where I unhide the hidden sheet, select each chart as I scroll down the screen by clicking on it then hide the sheet again and return to the interactive chart.
My problem is that I'm getting an error when the macro tries to select the first chart which is called "Chart 6":
Run-time error '-2147024809 (80070057)':
The item with the specified name wasn't found
I recorded the macro so I'm not sure why the macro isn't working now.
Code:
Sub ResetCharts()
'
' ResetCharts Macro
' Reset all charts
'
'
Sheets("Budget v Actual Graphs").Select
Sheets("Graph BG").Visible = True
ActiveSheet.ChartObjects("Chart 6").Activate
ActiveChart.ChartArea.Select
ActiveWindow.SmallScroll Down:=15
ActiveSheet.ChartObjects("Chart 35").Activate
[Code] ............