I know how to do the "normal" type of concatenation (concatenating?), but I was wondering if there was a way to concatenate a range of cells.
If my first three cells look like this:
A1 = Adam
A2 = Bob
A3 = Chris
I'd like cell A4 to say "AdamBobChris". I'm not worried about punctuation at this point. I thought I could just do =concatenante(A1:A3), but that's not working.
Sampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
I have a problem with a worksheet that my company accounting system exports every month.
Attached : sample of the worksheet.
In column ( F ) , I need a macro to do the following calculations:
1- Check for the Title - if it begins with "Cost Center"
2- Check for the Title - if it begins with "Account Code"
3- Detect the Range Start just below "Account Code" , and End with the row above "Total"
4- Concatenate the string written in each row of the range with the string in "Cost Center"
The Story is:
Each Month I've this worksheet with hundreds of Cost Centers and subsidiary Account Codes, And to be able to analyze the accounts efficiently I need to concatenate both Cost Centers & Account Codes manually ( as you see coloring sample in the attached file ). Which led to wasting many hours , and high risk of error while copying and pasting formulas.
I have a column of numbers in A1:A200 that I need to concatenate with a ";" in between each into one cell. Is there a way to do this without clicking in each cell individually? =concatenate(A1:A200) just returns the value in cell a1.
View 2 Replies View RelatedFollowing advice from this forum I have developed the following code to save a workbook with a filename made up from Ranges within a worksheet. What I had also hoped to do was include the first 2 letters of a Range.
The code that works is as follows
Can you concatenate a range. I want to join 30+ cells together but dont want to click on every one?
View 10 Replies View RelatedI have copied the following codes to create a Function of "Concatenate a Range Skip Blanks". However, I humbly seek help to add "," in between every word and also take away the empty space when there is only 2 words are concatenated. Pls refer to my attachement for easy understanding.
View 6 Replies View RelatedHere is the set up:
I have a calendar sheet where the dates go down the rows, and there is one column per member of staff. The staff is split in to three streams (different apps to cover, etc).
In the calendar, we mark a "C" for when someone will be on-call, R for when they will be doing a release, and so on.
In a separate sheet in the workbook, rather than having people look at the whole calendar of 30+ people to see who is on what shift for a given stream, I have an On-Call Rota where the rows are again the dates, and the columns are the streams. In each cell of this sheet, there should be the names of all the people of that stream who will be on-call for that date, so a concatenation of the actual staff members from the calendar, separated by CHAR(10).
I have been unable to find a combination of INDEX, MATCH, LOOKUP, VLOOKUP, etc, etc that gets me past the main problem: they only ever match the first C (or the first R for the On-Release Rota). I can't get a formula for a single cell in the rota that will return all the names where there is a C in the calendar in such a way that I can concatenate them.
Here is the kind of thing I have had to do .....
I get the correct results in K1 when I have a list of email addresses in column D, but when it tries to email it states, "Unknown recipient name found in the list of recipient list. Use a valid name and try again."
Code:
Dim x As String, rng As Range, cel As Range
Dim myString As String
With ActiveSheet
Set rng = .Range("D2:D" & Range("A65536").End(xlUp).Row)
[Code] .......
Return a list of each " case" that includes "item X" (both cases and items are stored as text). Each "case" has a list of associated items, which are stored in another worksheet. "Item X" may be associated with many cases (e.g. not unique to a single case).
The results should look something like this (item in one column, concatenated list of cases in another column): ....
I'm having a rather difficult time getting this one.
I am concatenating (is that a verb?) a bunch of cells to create an item code.
The combination of two different cells need to be able to give different values so I can dump the appropriate value into the CONCATENATE formula.
A picture is worth a thousand..
On tab 2 of a spreadsheet, I am trying to concatenate several cells on tab one! Everything comes together in the cell on tab 2, however it does not hold the date format. It turns it into general text so just random numbers that do not even tie to the date. Any way to lock the date format for this idea?
View 7 Replies View RelatedI have 7 consecutive cells which contain a %
e.g. A1 120%, B1 35% etc
I am trying to put them into one cell using concatenate
but am getting 1.20.3529411764705880.705882352941177
I would also like to separate them by comma,
I concatenate value of the several cells at one. (A1&"/"B1&"/"&C1 and etc. The length of characters may be different and I want it be looking neat by adding spaces. Something like that:
400/ 25/ 30
40/250/300
I've been trying to use IF OR and CONCATENATE to read 4 cells and give me a list of parts needed based on the data loaded in the 4 cells. I attached an example showing.
View 2 Replies View RelatedI have a Requirement where we need to concatenate the cells based on conditions
i have the attachment for the reference . please download the file from the link.
I have data in cells A1:A50. I want to combine all of them into cell A51. I know that I can achieve that by using =concatenate(A1,A2,A3,A4,........,A50) or =A1&A2&A3&A4&......&A50 but it would be very tiring to click on each cell. Just imagine if the data in cells A1:A1000? function that work like say =combine(A1:A50).
View 2 Replies View RelatedI cant quite get this, I have 4 cells in one row (a selection and can be any row), I need to string the values together and add some simple text.
Example:
Assume row 1 and columns A, B, C, D.
496 | 6d7 | Minor | Ø.375 +/-.010
What I need this to read as one long string:
#496, 6d7, Minor, Ø.375 +/-.010
Adding the text in Red.
Column A may be a single digit or up to 10 digits in length. Once the string is configured I want to copy it and manually paste in another application. If the string is placed any where else in the worksheet for formatting, it can be deleted after the copy/paste or macro end.
I'm trying to concatenate a few cells but seem to be missing the mark with my code. show me where I went wrong.
Code:
Dim counter As Long
Dim b As Range
Dim e As Range
Dim g As Range
Range("E1").Select 'Set the range for the loop
Selection.End(xlDown).Select
[code]....
I have the following formula in cell N4:
=CONCATENATE(O4,CHAR(10),"EBC Briefing: "&TEXT(P4,"dd-mmm-yy"),CHAR(10),"Site: ",Q4)
As long as 04:Q4 are ALL non-blank cells, the formula works. However, if ANY of the cells are blank, it displays the green rectangle in N4, but it doesn't offer the Trace option.
I have a macro to concatenate multiple cells but unfortunately it is not giving the result,
It has to concatenate below mentioned cells and put the result in column N
Sub ConcatColumns()
Do While ActiveCell "" 'Loops until the active cell is blank.
'The "&" must have a space on both sides or it will be
'treated as a variable type of long integer.
Range("N1").Select
ActiveCell.FormulaR1C1 = _
"=CONCATENATE(RC[-10],RC[-9],RC[-8],RC[-7],RC[-6],RC[-5],RC[-1])& ActiveCell.Offset(0, 0)"
ActiveCell.Offset(1, 0).Select
Loop
End Sub
I have a spreadsheet of inventory items that I am trying to prepare to import into Quickbooks. There are items in this sheet that are subitems of a parent item. The subitems have the same ID number (col. C in the attached sample), different quantities and different descriptions than the parent.
I need to to concatenate the Item Lookup Code (col. D in example) and the description, separated by a colon. Then I need to copy everything else in the parent record, except quantity and description, into the child records. There are close to 20,000 items in this sheet.
I want agglutinate some text values in the same cell. Something like that:
A1="John"
A2="Elton"
A3="Mark"
A4="AND"
B1=A1+A2+A3 =(John Elton Mark)
B2= A1 +A4 +A2 + A4 +A3 = (John AND Elton AND Mark)
I am attempting to concatentate several cells (10 to be exact). I only want to include cells that are not blank in the output. I searched the topics and found a similar problem. I attempted to modify that solution to fit my needs but I obviously do not quite understand exactly how it worked. I have attached a sample. The expected results are that if in row 1
columns a through j have any value they will then be concatenated or joined in some other fashiion seperated by a comma. I only want to include non blank values. I have placed the code that I attemted to use in this post.
=IF( COUNTBLANK(GL41:GU44)=0,GL41&", "&GM41&", "&GN41&", "&GO41&", "&GP41&", "&GQ41&", "&GR41&", "&GS41&", ">41&", "&GU41,IF(ISBLANK(GU41),""&GL41,GL41&", "&GU41))
Some of these cells are merged as indicated in the range of countblank().
I receive multiple worksheets containing transaction data with multiple numbers of row and columns. The data columns contain varying types of information like: price, quantity, location1, location2, loading dock, transaction date, buy/sell, purchaser, seller, currency unit, etc.
I have a need to concatenate into a single cell in a blank column, data from a number of cells in each row -- sometimes two cells, sometimes more. In some instances, I'd like to concatenate data for location1 and location2 with a delimiter like a semicolon-and-a-space to create a cell with: "location1; location2" Or in another instance, I'd like to concatenate multiple cells in a row, like: "location1; price; quantity; transaction date", etc.
I'm looking to create a macro that, with the cursor in a blank cell in a blank row, would open an input box, ask a user to select with the cursor the cells in the row to concatenate and then concatenate them into the blank cell in the row.
Ideally, the macro would populate the entire blank column with the concatenated data for the group of selected cells (from the same columns as in the row where the cells to be concatenated were selected) for each row where there is data. It is also possible that some cells in some rows of the selected columns would contain no data. In that case, I'd be looking to return just the delimiter, like: "location1; ; quantity; transaction date"
Right now, with no macro, I do it by hand like this:
To concatenate into cell I6, the contents of cells A6, B6, G6 and H6, I do a "=CONCATENATE(A6,"; ",B6,"; ",G6,"; ",H6)" in blank cell I6, but I'm looking for a way to do it fast in a macro that would fill in all of Column I.
I am trying to concatenate multiple lines of comments into one string and place that string in the comment field corresponding to the start of each record set. I believe the code below is close, but I am receiving this error
Run-time error '91':
Object variable or with block variable not set
Debug points to this line
rngComment = . Cells(intCounter, 5)
I'm not sure what I am doing wrong.
Option Explicit.........................
I have a list of P/N's that are used in more then one location. and it's sorted by P/N's.
ColA__ColB__ColC
______Loc___PN
______1_____A
______2_____A
______3_____B
______4_____C
______5_____C
I Want to be able to put in Col A the concatenate results of all equal P/N's from any given list. Or at least select the few cells that i know are duplicates and from that copy the Location to a single Column.
ColA ColB__ColC
______Loc__PN
1,2____1___A
_______2___A
_______3___B
4,5____4___C
_______5___C
I have two columns - A and B. In column A there are blank cells and filled cells. There is a blank cell and after it - a variable number of filled cells, then a blank cell again and a variable number of filled cells. I am trying to concatenate the filled cells from column A into a single cell in column B, which is corresponding to the blank cell in column A. Values should be comma delimited.
For example: A2-blank; A3-27; A4-63; A5-blank; A6-31; A7-blank .. and in column B should be B2-27,63; B3-blank;B4-blank; B5-31,B6-blanc and etc.
I am trying to figure out how to Concatenate a group of cells if they contain a certain text. Basically I have a list of Architects in column A and the account name in column B... and I want to say Concatenate column A, IF column B=Specific Account (ex: Coca-Cola). The list will be added to frequently so the formula must refer to the entire columns, not just a certain range.
As of right now, only the first architect associated with each account will appear. I have attached a workbook with the example..
example.xlsx‎
I am trying to merge cells A1:GR1 in to one cell by using the concatenate formula and the copying and pasting the values in to the same cell.
View 4 Replies View Related