I'm trying to concatenate a few cells but seem to be missing the mark with my code. show me where I went wrong.
Code:
Dim counter As Long
Dim b As Range
Dim e As Range
Dim g As Range
Range("E1").Select 'Set the range for the loop
Selection.End(xlDown).Select
[code]....
Sampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
I have a list of names with blank cells in Column A cell 2.
I want the programme to scroll through this column until it finds a name, when it does I want it to look in cell offset(1, 1), in this case B3 to see if there is a number. I want this number to be moved to offset (0, 1) AND any subsequent numbers below it until the next blank cell in that column (B).
In the attached image cell B2 will contain all numbers in cells B3:B9 with a / between them. Cell B10 will have number from B11 and B12 will have B13:B15. If there is no number it will just continue to the next name in column A. My rough code below delivered the first number only in the relevant cell and I'm not clever enough to get it right. It does not have to be super slick as it's for one time use.
I need numbers in column B cleared as they are concatenated into the single cell.
Spreadsheet.jpg
I think I just need a basic Nested For Loop code. I have a list of in column A, from A1:A537 and another list in column B, for B1:B50. I want to add a column that concatenates, each item in Column A to B1 (so 537 rows), then again each item in Column A to B2, another 537 rows, etc.. this loop is repeated 50 times, one for each name in column B.
View 3 Replies View RelatedI am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedI had a problem finding something then deleting the column, I tried to alter the code from that thread to solve a new problem and I am close (I think), but not quite there. I need to find the column "Group" and merge it with the column "Sex" which is offset by 1 column. This code will go through and find the column "Group" and merge for the first cell, but will then get stuck in a loop just concatenating "Sex" to the end continuously. I need it to concatenate both columns entirely together. Any simple fix to what I modified? Previous thread should you be interested:Find Part Text On All Sheets & Delete The Column.
View 9 Replies View RelatedI'm having a rather difficult time getting this one.
I am concatenating (is that a verb?) a bunch of cells to create an item code.
The combination of two different cells need to be able to give different values so I can dump the appropriate value into the CONCATENATE formula.
A picture is worth a thousand..
On tab 2 of a spreadsheet, I am trying to concatenate several cells on tab one! Everything comes together in the cell on tab 2, however it does not hold the date format. It turns it into general text so just random numbers that do not even tie to the date. Any way to lock the date format for this idea?
View 7 Replies View RelatedI have 7 consecutive cells which contain a %
e.g. A1 120%, B1 35% etc
I am trying to put them into one cell using concatenate
but am getting 1.20.3529411764705880.705882352941177
I would also like to separate them by comma,
I concatenate value of the several cells at one. (A1&"/"B1&"/"&C1 and etc. The length of characters may be different and I want it be looking neat by adding spaces. Something like that:
400/ 25/ 30
40/250/300
I've been trying to use IF OR and CONCATENATE to read 4 cells and give me a list of parts needed based on the data loaded in the 4 cells. I attached an example showing.
View 2 Replies View RelatedI know how to do the "normal" type of concatenation (concatenating?), but I was wondering if there was a way to concatenate a range of cells.
If my first three cells look like this:
A1 = Adam
A2 = Bob
A3 = Chris
I'd like cell A4 to say "AdamBobChris". I'm not worried about punctuation at this point. I thought I could just do =concatenante(A1:A3), but that's not working.
I have a Requirement where we need to concatenate the cells based on conditions
i have the attachment for the reference . please download the file from the link.
I have data in cells A1:A50. I want to combine all of them into cell A51. I know that I can achieve that by using =concatenate(A1,A2,A3,A4,........,A50) or =A1&A2&A3&A4&......&A50 but it would be very tiring to click on each cell. Just imagine if the data in cells A1:A1000? function that work like say =combine(A1:A50).
View 2 Replies View RelatedI cant quite get this, I have 4 cells in one row (a selection and can be any row), I need to string the values together and add some simple text.
Example:
Assume row 1 and columns A, B, C, D.
496 | 6d7 | Minor | Ø.375 +/-.010
What I need this to read as one long string:
#496, 6d7, Minor, Ø.375 +/-.010
Adding the text in Red.
Column A may be a single digit or up to 10 digits in length. Once the string is configured I want to copy it and manually paste in another application. If the string is placed any where else in the worksheet for formatting, it can be deleted after the copy/paste or macro end.
I have the following formula in cell N4:
=CONCATENATE(O4,CHAR(10),"EBC Briefing: "&TEXT(P4,"dd-mmm-yy"),CHAR(10),"Site: ",Q4)
As long as 04:Q4 are ALL non-blank cells, the formula works. However, if ANY of the cells are blank, it displays the green rectangle in N4, but it doesn't offer the Trace option.
I have a macro to concatenate multiple cells but unfortunately it is not giving the result,
It has to concatenate below mentioned cells and put the result in column N
Sub ConcatColumns()
Do While ActiveCell "" 'Loops until the active cell is blank.
'The "&" must have a space on both sides or it will be
'treated as a variable type of long integer.
Range("N1").Select
ActiveCell.FormulaR1C1 = _
"=CONCATENATE(RC[-10],RC[-9],RC[-8],RC[-7],RC[-6],RC[-5],RC[-1])& ActiveCell.Offset(0, 0)"
ActiveCell.Offset(1, 0).Select
Loop
End Sub
I have a spreadsheet of inventory items that I am trying to prepare to import into Quickbooks. There are items in this sheet that are subitems of a parent item. The subitems have the same ID number (col. C in the attached sample), different quantities and different descriptions than the parent.
I need to to concatenate the Item Lookup Code (col. D in example) and the description, separated by a colon. Then I need to copy everything else in the parent record, except quantity and description, into the child records. There are close to 20,000 items in this sheet.
I want agglutinate some text values in the same cell. Something like that:
A1="John"
A2="Elton"
A3="Mark"
A4="AND"
B1=A1+A2+A3 =(John Elton Mark)
B2= A1 +A4 +A2 + A4 +A3 = (John AND Elton AND Mark)
I am attempting to concatentate several cells (10 to be exact). I only want to include cells that are not blank in the output. I searched the topics and found a similar problem. I attempted to modify that solution to fit my needs but I obviously do not quite understand exactly how it worked. I have attached a sample. The expected results are that if in row 1
columns a through j have any value they will then be concatenated or joined in some other fashiion seperated by a comma. I only want to include non blank values. I have placed the code that I attemted to use in this post.
=IF( COUNTBLANK(GL41:GU44)=0,GL41&", "&GM41&", "&GN41&", "&GO41&", "&GP41&", "&GQ41&", "&GR41&", "&GS41&", ">41&", "&GU41,IF(ISBLANK(GU41),""&GL41,GL41&", "&GU41))
Some of these cells are merged as indicated in the range of countblank().
I receive multiple worksheets containing transaction data with multiple numbers of row and columns. The data columns contain varying types of information like: price, quantity, location1, location2, loading dock, transaction date, buy/sell, purchaser, seller, currency unit, etc.
I have a need to concatenate into a single cell in a blank column, data from a number of cells in each row -- sometimes two cells, sometimes more. In some instances, I'd like to concatenate data for location1 and location2 with a delimiter like a semicolon-and-a-space to create a cell with: "location1; location2" Or in another instance, I'd like to concatenate multiple cells in a row, like: "location1; price; quantity; transaction date", etc.
I'm looking to create a macro that, with the cursor in a blank cell in a blank row, would open an input box, ask a user to select with the cursor the cells in the row to concatenate and then concatenate them into the blank cell in the row.
Ideally, the macro would populate the entire blank column with the concatenated data for the group of selected cells (from the same columns as in the row where the cells to be concatenated were selected) for each row where there is data. It is also possible that some cells in some rows of the selected columns would contain no data. In that case, I'd be looking to return just the delimiter, like: "location1; ; quantity; transaction date"
Right now, with no macro, I do it by hand like this:
To concatenate into cell I6, the contents of cells A6, B6, G6 and H6, I do a "=CONCATENATE(A6,"; ",B6,"; ",G6,"; ",H6)" in blank cell I6, but I'm looking for a way to do it fast in a macro that would fill in all of Column I.
I am trying to concatenate multiple lines of comments into one string and place that string in the comment field corresponding to the start of each record set. I believe the code below is close, but I am receiving this error
Run-time error '91':
Object variable or with block variable not set
Debug points to this line
rngComment = . Cells(intCounter, 5)
I'm not sure what I am doing wrong.
Option Explicit.........................
I have a list of P/N's that are used in more then one location. and it's sorted by P/N's.
ColA__ColB__ColC
______Loc___PN
______1_____A
______2_____A
______3_____B
______4_____C
______5_____C
I Want to be able to put in Col A the concatenate results of all equal P/N's from any given list. Or at least select the few cells that i know are duplicates and from that copy the Location to a single Column.
ColA ColB__ColC
______Loc__PN
1,2____1___A
_______2___A
_______3___B
4,5____4___C
_______5___C
I have two columns - A and B. In column A there are blank cells and filled cells. There is a blank cell and after it - a variable number of filled cells, then a blank cell again and a variable number of filled cells. I am trying to concatenate the filled cells from column A into a single cell in column B, which is corresponding to the blank cell in column A. Values should be comma delimited.
For example: A2-blank; A3-27; A4-63; A5-blank; A6-31; A7-blank .. and in column B should be B2-27,63; B3-blank;B4-blank; B5-31,B6-blanc and etc.
I am trying to figure out how to Concatenate a group of cells if they contain a certain text. Basically I have a list of Architects in column A and the account name in column B... and I want to say Concatenate column A, IF column B=Specific Account (ex: Coca-Cola). The list will be added to frequently so the formula must refer to the entire columns, not just a certain range.
As of right now, only the first architect associated with each account will appear. I have attached a workbook with the example..
example.xlsx‎
I am trying to merge cells A1:GR1 in to one cell by using the concatenate formula and the copying and pasting the values in to the same cell.
View 4 Replies View RelatedHow can I concatenate 2 cells address style? I'm trying to merge 2 cells into one, so that one is under the other in the same cell.
View 5 Replies View RelatedI currently have a spreadsheet that contains about 1700 lines of data related to ~400 different clients which I am looking to consolidate.
The data is currently in this format (a set like this repeated ~400 times with anywhere between 3 and 7 services):
Company ID #
Company Name
Service1
Company ID #
Company Name
Service2
Company ID #
Company Name
Service3
I would like to have the data in this format (one row per company with all of the services in the third column concatenated into a single cell, all while removing the duplicate rows.)
Company ID #
Company Name
Service1, Service2, Service3
How to create the code (or describe the process) necessary to do this?
I have an excel 2007 spreadsheet that lists
items on multiple rows for the same customer.
Each sheet will list anywhere from 25 to 100 individual customers.
I need to identify the duplicates, concatenate
the "Items" to a single cell on the first row, and
delete the duplicate rows. eg:
Cust #| Item
1 | A
1 | B
1 | C
2 | B
2 | E
3 | A
3 | C
3 | E
The result should look like:
Cust# | New Item
1 | A, B, C
2 | B, E
3 | A, C, E