I have been asked to create a clash grid that shows when promotions for specific customers are on for specific products.
I've got all the information collated, and I suck it all up into a cover sheet that splits it by product, by customer, and then shows the weeks each product is on promotion. The issue I have, is I wish to colour code each customer so it is easier to read for those who aren't excel savvy.
I've tried conditionally formatting it, but have stumbled a couple of times. I can write an 'if' statement for it, but can't work out how to get the conditional formatting to follow the statement (I'm not sure this is the best way to do it, but figured it was worth explaining).
Attached is a 'How it is' and 'What I want it to be'.
I currently have 6 active conditions in my data range. Is there a way that I can "turn off" some filters so that the cell goes clear without having to delete the actual format?
Example: Right now I have any cell with DH turn blue any TW turn green, and any with both turning orange. Is there a way to filter the data so that i can turn off just blue/just orange/both blue and orange?
We have a spreadsheet that is sent to a manager weekly. The manager takes the sheets from 30+ individuals and copies all into a single workbook that is then distributed to a very large audience and reviewed weekly. In this workbook, I have created drop downs with conditional formatting - Low = Green, Medium = Yellow, Critical = Red. On the original workbook, this formatting works great, however, after the manager consolidates and redistributes all worksheets the Green shows Gray, Yellow is OK and Red shows Black.
When using conditional formatting, I have it set to the following:
C2=60 (Reference Cell) C3=5 (Reference Cell)
Conditional Format Settings If C3 >= C2/12 then pattern set to Green If C3 < C2/12 then pattern set to Red
Here is the problem - when you have a value in C3, everything is fine, it's either green or red. If C3 is blank, it defaults to green because the conditional format is true.
Is there anyway to add something in there to have no color when C3 is not populated?
I have a column that when I put info in it gives me a colour, now on this I have quit a few different labels, eg. AAG201, PRA001, 000010 and so on, now on my rule I have put in that if it is PRA* ,AAG* to be one colour and 0000* to be a colour. (this is working without a problem).
I have tried to get the rest of the row to be the same colour, but cannot get te rules to work, I do not know which rule to use to get this working.
I have four conditions that dictate font colors in column "d" of "sheet1" and am using the following Private Sub Font_Change(ByVal Target As Range) Set Myrange = Range("D2:D1000") For Each Cell In Myrange
If Cell.Value = "Started" Then Cell.Interior.ColorIndex = 3 End If If Cell.Value = "Pending" Then Cell.Interior.ColorIndex = 4 End If If Cell.Value = "On-going" Then Cell.Interior.ColorIndex = 18 End If If Cell.Value = "Completed" Then Cell.Interior.ColorIndex = 6 End If
Next End Sub
1. Does this code look valid? 2. Do I paste the code in a "module" or in a worksheet object? If I add this to a module, how does the code know to reference sheet1? 3. Is there a handy reference guide that shows color codes? If so, where can I get a copy.
I need a formula to change the color of the cell based upon the following criteria
In cell I3, if J3>7 change color to teal, if H3<$A$1 color cell red, if J3<7 color cell yellow, if J3="COMPLETE" color cell grey, otherwise do nothing.
I found in the web-site a great VBA code that replaces the "Conditional Formatting" option in Excel. The problem is that it changes the "fill color" and I also want to change the "font color".
Private Sub Worksheet_Change(ByVal Target As Range) Dim icolor As Integer
If Not Intersect(Target, Range("C4:C14")) Is Nothing Then Select Case Target Case 0 icolor = 2 Case 1 icolor = 4 Case 2 icolor = 39 Case 3 icolor = 45 Case 4 icolor = 37 Case 5 icolor = 15 Case Else 'Whatever End Select
suppose I have the numbers 1-25 in a column. I want to color the numbers 1,4,7,10,13,16,19,22,25 green, color 2,5,8,11,...25 orange and color 3,6,9,12...25 red. I can not set up the conditional formatting formulas correctly.
I'm trying to make a tracking sheet of upcoming annual inspections for different pieces of equipment. I've already got a column set up listing the inspection due date. Using three conditional formats, the individual cells change color based on the amount of time until the inspection is due (green normally, yellow at 30 days out, red past due).
What I'd like to do is have the entire row of information change color based on the color of the cell the inpection due date is listed in. For ex. J6 lists the inspection date as 24-Feb-07 and is therefore red, I'd like A6-I6 and K6-P6 to change to red as well. And when the inspection is compleate and I manually change J6 to say 25-May-07, I'd like all of row 6 to change green based on the fact that J6 is already going to.
Currently I have used all 3 conditional formats to colour certain cells.
1) Colour whole row 'green' when 'complete' colum ="Y" 2) Colour todays date column black in the date table to easily define todays activities. 3) By entering start and end dates that contractors are required, I colour these selected dates in blue with a letter 'x' in the calendar area.
This can easily be seen from the sample sheet above. If you can adapt this for yourselves carry on.
I am also using a macro (found in these forums) to automatically change the colour of the contractors tab to certain colours when selected from the drop down selection box (enabling more than just 3 conditional formats)
What I would like to happen though, is that when item 3 above is performed (select a start and end date) the filled blocks, colour the same as the contractor colour, instead of the blue with the 'x'.
Summary of performance of various products against target is as follows,
Product vs Target Color Code Result
CH4OH Green 1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree If 2 Amber of the 4 products, then final result amber If 2 Red of the 4 products, final result Red
I have conditional formatting set to paint the cells a certain color if the values are >0 and a diff. color if they are <0. If i enter the value manually everything is fine but if a use a formula to do the calculation there is no formatting.
Is it possibe to change another cells color (Fill) based on what is placed in that cell? Example: A1 =if there is an "x" in A2 highlight A1 Green, but I have information in A1 also. Or if I had a different cell say= if there is an X in A1 Highlight A1 Green ect.. This key is to highlight a cell that I have information in based on a different cell having an X in it. If ther eis no X in the cell I have indicated, nothing needs to happen.
I have this SS that uses conditional formatting to color days in a calendar, dates are entered in columns B & C when the dates are entered then the days of the month highlight. Everything works great but I can not get the conditional formatting to work in column E. Column E would be January 1. If I enter Jan 1 in column B & Jan 30 in column C all the days highlight except Jan 1? I have uploaded the SS.
I would like to be able to put a value into a cell. By doing this I would like another cell next to it to turn a color. With that said, is it also possible to format a cell with several possible scenarios in one formula to be able to change the cell next to it a color?? Example is this lets say Cell B1 could have the letters, A B C D or E entered. So that the Cell A1 turns say the color Red.
I have a workbook with 4 sheets. Each sheet is set up the same. There are 4 columns. The column headings are Title, Item #, 2009 Retail Price, and Price changed from 2008 (in A, B, C and D respectfully).
I need to find all red text in column C and place a 'Y' in column D. If the text in column C is not red I want a 'N' in column D.
Now if data for a certain column is invalid, it will contain text as follows: "N/A". I want to color code the variation existing for the the three columns.
For example: If on row 3, 3A contains data, 3B contains data, but 3C contains N/A, i want the color of all three cells to be blue (not text color but fill color). If on row 4, 4A contains N/A, 4B contains N/A, and 4C contains data, I want the color of all three cells to be yellow. and the rest of the variations as well (5A contains Data, 5B contains N/A, and 5C contains data then all three green etc... etc..)
Of course logically the condition is strictly related to the N/A, and the rest of the data can contain text and numbers if it is not N/A.
Can the color coding be placed in RGB format as well? or can I create a cell with the fill color desired as a reference (in other words a legend that I can refer to when color coding the sheet)?