I have a totals spreadsheet that links many other spreadsheets. I need to set up a formula for conditional formatting if the cell is blank (NOT ZERO). I need to ensure that the users are inputting zeros and not leaving the cells blank. I tried this but it's not working: ="IF('[Brown Deer-Q2-08.xls]Week 7'!G13)<"""
View 3 RepliesI need a hand with conditional formatting if possible?
In the attached document i need the cell fill for the cells containing values (in column C) to change if data on sheet 2 is anything other than blank.
e.g. Sheet 1 C3 would be green fill and C4 would be no fill as Sheet 2 B3 contains a date and B4 does not
I've read dozens of threads on how to have conditional formatting ignore blank cells but I am not understanding how to make it happen myself...
Logic: Highlight the cells that are >=10 but ignore the blank cells that have functions in them
I need to use conditional formatting to recognize blank cells meaning totally blank and not cells with formulas returning 0 what i must use to get this result?
View 9 Replies View RelatedI have a spreadsheet where I have a column of dates and I want conditional formatting to highlight the cell red if the date is less than or equal to today but if the cell is blank to do nothing.
At the moment I have the following formatting applied using the "format only cells that contain" option I have cell value less than or equal to =TODAY() except that obviously highlights every cell red that doesn't contain a date. Is there another conditional format I can apply in addition to this that will not highlight the blank cells ?
I want AB1 to highlight red if date in S1 is not blank and N1 doesnt equal AA1. Is this possible?
View 1 Replies View RelatedAs a pert of a spreadsheet I have 2 columns (M5:N400) of 400 cells deep. Each cell in these columns contains a formula that counts days, when appropriate. They can end up showing a value of blank, a number between 0 and 5, or any number greater than 5. (But very rarely greater than 30)
If the number is greater than 5 then it means that it has exceeded it's target time and I wish to highlight this with conditional formatting (CF). I have a CF on all cells in both columns that says.
If "The cell value" is "Greater than" "5"... then
format the background colour to a pale yellow.
It works, but doesn't work.
If the cell value is 0 to 5 it's unchanged. Good.
If the cell value is >5 it changes. Good.
BUT, if the cell is blank it also changes. Bad!!!
I assume it is because it is looking at the fact that there is a formula in the cell, even though the displayed value is "". So I tried a second level saying that if the cell is equal to "" then no format, but it still changes.
I have a formula in A56 that adds cells A1:A54. I want to use conditional formatting to highlight A56 if any of the cells in A1:A54 are blank. I am unsure how to do this.
View 3 Replies View RelatedI'm trying to apply conditional formatting (shading) to cells that are left blank.
(Purpose: I am designing a research template for a client to complete with data and want the spreadsheet to show them where they've "missed a bit"!)
(When I go to the conditional formatting box, it asks me to specify when "cell value is"..."between/not between/equal to/not equal to" etc. But there's no option to specify when the cell is blank.)
I need to format cell D1 to have the fill color be red if any cell in D2:D21 is blank. I've tried
=VLOOKUP("", $D$2:$D$21, 1, FALSE) but that returns #N/A (there is one blank cell in the range at the moment).
I really don't want to use =OR($D$2="", $D$3="", ...$D$21="") if I can avoid it.
I am trying to alert our purchasing mgr when order dates are approaching or not meeting our project deadline.
As of now i have the following rulesif order date is due today or past due - redif order date it greater than project date - redif order date is due within 2wks - yellow
Now all I need is a rule where there is an order without a due date but the project deadline is within 2wks (yellow) and past due or due today (red)
KO_04.01.14.xlsx
I have four columns of data, the last column being Date Completed, I'd like to shade the whole row of four cells if the last cell contains a date. I tried to just work on shading if the cell contains anything with conditional formatting using the formula:
=$D$1"" apllied to all my cells and chose green shading and nothing happened.
Here's my problem: I want conditional formatting to show yellow on dates for this month, lite red for cells containing dates this week, and red for any past dates. I figured out all of that, now IF there is a date in the cell to the right, the cell turns green. In other words the cell to the right shows that the action was completed on that date and we are good.
What would the formula be to:
Turn cell green, IF cell to right is NOT BLANK
I have tried to set up a list of cells to highlight in red any numerical values which are greater than 0 using conditional formatting. This works fine, except that all blank cells are also highlighted in red. Formula is currently: cell value is greater than 0. What do I need to do to ignore the empty cells?
View 2 Replies View RelatedOk so my project is tracking how many days have passed since a collection notice has been sent. Assuming the case isn't closed, a response from the customer hasn't been received, the case has been assigned to an employee, and assuming the notice was actually sent in the first place.
There are instances where the collections case may have been closed without a response date or any other date and we call that "Administratively Closed."
This is my formula: =IF(OR(CaseStatus="Closed",ISBLANK(NoticeSentDate), ResponseDate""),"",TODAY()-NoticeSentDate)
Problem is, now that I'm trying to conditionally format the ones >60 days, and =45 days WITHOUT getting the "blank" cells to change color too.
I got the one for >60 days: =AND(OR(CaseStatus"Closed", CaseStatus"Unassigned"), Comments "Administratively Closed", DaysPassed>60, ResponseDate="", DateEnteredInDatabase"")
I can't get =45 without having a bunch of cells that appear blank change color too.
I have a range of cells with numeric values or blanks. I set up a Conditional Formatting rule with this range selected: New Rule > Format only cells that contain > Format only cells with: Blanks; then I set the formatting to a light green fill and on the Number tab > Category = Custom > Type: "blank"
The blank fields get the light green fill, but no text; that is, the value displayed is still blank.
I go back to edit the CF rule and change Blanks to No Blanks. The results are what I expect: the cells with numbers display the text blank and have a green fill; the blank cells have no fill (white).
This is my testing criteria. I eventually want the empty cells to display 0 (zero). I tried setting Custom > Type: 0 (the number placeholder zero) and Type: "0" (literally the number zero), and neither works.
I have tried this with Format only cells with Cell Value equal to [the address of a blank cell].
I tried to set the value as "" but kept getting =""""; and ="" became ="=""" ???
I have tried this with Use a Formula... using the len()=0, isblank(), and other approaches, all with the same results.
I also made sure the option [x] Show a zero in cells that have a zero value is checked.
With all approaches to identifying the blank cells, they ARE obviously being recognized as blank values: the fill color is being applied to the right cells; and when Not Blank is the criterion (or a negation of a formula), the blank ones are not formatted. But blank cells will not display the text as defined in the Custom Formatting.
And this isn't an issue of "If the cell displays 'blank' it's no longer blank, so the rule doesn't apply" - HERE'S WHY: I set up a second CF rule that sets the Font to red when the value is greater than zero and had this CF rule follow the CF rule for No Blanks (the test above that works). Cells with positive numbers displayed blank in red, cells with zeros or negative numbers displayed blank in black. This clarified that the actual value of the cell is being evaluated, not the displayed value after Custom formatting is applied.
I have a spreadsheet filled with formulas that depend on a value being entered into A2, A3, A4, etc... So column A starting at A2 is where I will manually input a number and the formulas I have in columns B, C, and D will import information from another sheet based off what is put in column A. In column D the formula I have to import data
is =IFERROR(VLOOKUP(A2,Master!C:M,11,0),"").
This will import another number. Additionally in column D, I have conditional formatting that will return a red, yellow or green light based off the rule I have in place. Everything works fine, the only problem is that column D has a green light all the way down even without a value being placed in column A. I would like to find out a way to keep the cells in column D blank until a value is entered in column A. Also, if I go back and delete the value in column A, I would like the corresponding cell in column D to go back to blank as well.
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I have attached the sample. I need the cells without the employee or without a boss to highlight a color and i also need the date of certification to highlight if it is more than one year old.
conditional formatting.xlsx
I need to automate a conditional fill down in excel. I have a sheet, some of the columns have rows of empty cells (the amount of empty cells varies). Whenever there is an empty cell I need to fill down, however when a new value is encountered that must then be filled down and so on. This bit I have as:
Set rngWBSv1 = Range("c2", Range("c65536").End(xlUp))
For Each clWBSv1 In rngWBSv1
If clWBSv1.Value = "" Then clWBSv1.Value = clWBSv1.Offset(-1, 0).Value
Next clWBSv1
Set rngWBS2 = Range("d2", Range("d65536").End(xlUp))
For Each clWBS2 In rngWBS2
If clWBS2.Value = "" Then clWBS2.Value = clWBS2.Offset(-1, 0).Value
Next clWBS2 ......................
A1 is not in any pattern colour. But if A1 is changed into, say, Red, B1 will be equils to D5+F5. Otherwise if A1 is changed into Blue, B1 will be equils to D6+F6. Can it been done by Excel 2003?
View 2 Replies View RelatedI have a conditional format in Cell J3 that has 2 conditions as follows:
Condition 1: Cell Value, Equal to, ="NO", and then the format will color the cell RED.
Condition 2: Cell Value, Equal to, ="YES", and then the format will color the cell GREEN.
I want Condition 3 to turn the cell J3 YELLOW if there is ANYTHING at all or anything above "0" typed into Cell D3.
I would like to validate data but cant quite get the formula right. I have a cell (say F7) that cannot be blank if (say E7) another cell equals a text value (say "S"). Anyone have an idea? I am stumped at this seemingly easy task. I am applying the validation below to F7.
I forgot to add the valid combinations:
E7 = P and F7 = Entry: OK
E7 = P and F7 = Blank: OK
E7 = S and F7 = Entry: OK
E7 = S and F7 = Blank: INVALID
I have tried the formula: =IF(AND(E7="S",ISBLANK(F7)),1,0) within the validation window but blank entries are still allowed. I put this code in adjacent cells as a formula, the values are correct either 1 or 0.
I have two columns. In column B is the date of "last check". I column A is the date of "next check". I would like to have cell A2 in yellow color 334 days after the date entered in cell A3 and than in red color 365 days after the date entered in cell A3. Same thing for cell B2 related to date entered in cell B3. Yellow color in cells announces that check will expire within 30 days and red color that check has been expired.
View 1 Replies View RelatedI have a formula as follows:- B20 is the cell I wish to format. The formular is =B18-400. My problem is I wish to hide the -400 from the cell until it changes.
View 5 Replies View RelatedIf the value in column AE falls below 100 it needs to turn yellow. If the value drops below 50 it needs to turn red.
But if the figure in column AB is 0 then i dont want it to do anything at all.
how to highlight a particular cell red if the value in one cell is less than or equal to the value in another cell. For instance, How do I make it so that the "Hours to go" cell turns red if the value in the "Actual Last Completion" value is less than or equal to the value of "Last Completed" cell?
View 3 Replies View Relatedi want to calculate percentage between A and B and highlight top 10 values in B.
as of now i am calculating % in C and applied conditional formatting in C. filtering C based on color i am formatting B manually.
is there any option to avoid this manual work.
Total countAlarm reported%
562545%
783545%
322578%
In Excel, I want to do conditional formatting on a cell based on the value of another cell. For example: in cell A1, I have text. I want this cell to have a grey background if the value of cell B1 is less than or equal to 1/31/14 and to have no fill (default) if it is greater than that date.
View 8 Replies View RelatedIn the attached, I want cells to be highlighted red if they're NOT EQUAL to 0. Why is this conditional formatting not working (i.e. the cell is being highlighted)?
Conditional Formatting Example.xlsx