I have a spreadsheet with conditional formatting that highlights my data range in a row red when their is no data entered in cell (E2) with this formula =COUNTIF($E2,"")>0 Now my question is...How can I make the highlighting go away if I enter information into cell (C2)? I added another condtion that said =COUNTIF($C2,"")
View 9 Repliesi want cell a1 to highlight if cells b1,c1,d1 are greater than 1.
View 2 Replies View RelatedI'm looking for a formula to use with conditional formatting that highlights cells if any of more than 3 conditions is met. I saw it on this forum before, but I can't find it with a search. It was something like =or(condition1),or(condition2), etc.
View 9 Replies View RelatedCan I use Conditional formatting (highlights duplicate values) but highlight the number even if the number is an Positive or Negative number.
It must highlight the number if it's -300 or 300 in both instances.
I think this should work but it doesn't.
=AND($B4>=D$2,$C4<=D$3)
Should look like this
Excel Conditional Formatting.png
I have a two way data table for which the two variables are changed frequently. In the data table, for ease of reference, i usually highlight the corresponding row and column of the two most current variables the intersection of which gives you the current output. But these highlights need to eb changed each time the variables are changed 9the table is copied onto another document for presentation hence the need to keep changing the highlights).
I was thinking of configuring the highlighting process to happen dynamically, i.e. the row and column highlights change dynamically when the variables are changed.
In one tab, I have a huge data set as follows:
account --- account(1) --- value
111111 --- b5 --- 123456
111111 --- a2 --- 32156
111111 --- c5 --- 31221
111111 --- e7 --- 1121312
222222 --- b5 --- 5464
222222 --- c1 --- 887895
333333 --- d4 --- 45454646
in another tab, I want to be able to manually input a value, in this case account, (1111 for example) and have it return all the values in account(1) (in this case b5, a2, c5, e7). Once I have that, I can do a vlookup to get the "value" which is what i need, but I just can't quite seem to get it to do the first part - I input account and it returns all account(1) values.
I've got a column with numbers. some of the numbers have the following signs/symbols proceeding the value in the same cell: ',ft,#,ea,each. I want to have these removed by a formula so that the numerical values are alone.
View 3 Replies View RelatedI have no experience with VBA programming. I am currently trying to create a function that sums the cells that have a specified background color applied by conditional formatting.(ie red)
I have tried working off an example that was displayed below
http://www.cpearson.com/excel/CFColors.htm
I have searched the forum and the 12 pages of results that had the words conditional clumns, but could not find the answer. I am new here so I don't want to ask a question that has been asnwered before. If I missed it I apologize.
I would like to create a spreadsheet that would "automatically" create the proper number of coumns or rows to satisfy a certain set of data. This may be better explained by way of example.
I do financial analysis of real estate. This real estate is say 100 lots today and these lots are going to sell out evenly over a 10 quarter period, or 10 sales per quarter. Simple enough to set up and show the proper cash flow. But lets say I wanted to chnage the sell out period to 8 quarters. Today I would have to manually delete the last two columns. Further let's say I want to run an analysis that has a sell out over 13 quarters. Then I need to add back in the proper number of columns and make sure I correctly copy over the formulas etc.
I'd like a way to have the spreadsheet automatically determine the proper number of columns (or rows) based on a formula that is part of the input data.
I have this bit of code that highlights every other row. I would like to modify it so that it doesn't highlight the entire rows but instead stops at the column of whichever cell contains data.
For instance if I’m using a block of cells such as A1 to C5 it would highlight A2-B2-C2 & A4-B4-C4 only. Later on if I insert data in D3 it would now highlight A2-B2-C2-D2 & A4-B4-C4-D4. Anytime that data would be inserted into a new column all row highlight would now adapt to the new length of the table.
Here’s the
Sub ShadeEverySecondRow()
Dim lRow As Long
lRow = 0
Do
lRow = lRow + 2
If IsEmpty(Cells(lRow, 1)) Then Exit Do
Rows(lRow).Interior.ColorIndex = 15
Loop
End Sub
In excel sheet some times I highlight Cells, Rows or Columns for references but while printing these highlights get printed. is there any formatting tip so that only values are printed but highlights don't get printed (not even in grey scale).
View 3 Replies View RelatedJust wondering if it is possible to put a check box with a macro say in cell C3 that when you tick the box it changes it to green as completed, but after a set time say 2 weeks the check box clears itself and changes the colour to red to highlight that its due again. Also when you tick the check box it inserts a date in another cell say D4 when it was ticked.
Reason for this is am trying to make a spread sheet with different products that require different testing frequency, some monthly some weekly and some fortnightly. At the moment we are just using a white board and staff just tick task completed problem is they need to check when last done especially when test required is of every 2 weeks and people forget.
If I make a spread sheet and it highlights the check box in red like I want to above at least it will give them a visual reminder that it is due.
Is there a way to pause a macro while it is running?
For example:
COL A COL B
1 2
b 4
5 5
My current macro highlights all characters in this case b.
Is there a way to make it stop when it highlights b, and make it continue running when I want? I'm using a Form for this purpose.
I've seen a spreadsheet where the user can click on a cell, and the row the cell is in automatically highlights.
This is useful where there is a lot of columns, and it also looks pretty snazzy!
How do I do this? I know one way is to put the following code in when you right click the sheet tab and choose "view code":
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
UsedRange.EntireRow.Interior.ColorIndex = xlNone
ActiveCell.EntireRow.Interior.ColorIndex = 6
End Sub
But then I can't have nice background colours for other cells. Any suggestions?
btw, I've v. new to VBA - best to assume I know nothing!
attached is the sheet u have prepared for me but there is a problem in this sheet that it highlights only the first value in a cell however my requirement is to highlight the every value in a cell if matching with the search criteria.
View 4 Replies View RelatedI have a form that I have created for our other stores to use while balancing the cash drawer.
I would like to somehow highlight all the fields that need to be entered, but need the page to still print out clearly.
I must be hitting a key by accident sometimes which makes Excel highlight the cells immediately below the ones I want as well. So, if I click in the middle of cell A1, it also highlights A2, A3 and sometimes A4 even though I haven't dragged down over them.
Why is this? I can't work out how to stop it doing it. Some previously recommended hitting F8 but this doesn't seem to stop it.
Trying to use VBA to prevent users from sending a form unless all fields have been completed, then highlight blank cells, and send a pop-up message that all cells in myRange need to be filled out. Otherwise, send the worksheet.
My code will highlight the blank cells, but it only highlights one cell at a time and then I have to click on the pop-up message for it to highlight the next one, and then the email still goes out.
How can I fix this to highlight all the blank cells at once, with only one pop-up message, and prevent the email from going out?
Public bCheck As Boolean
Sub SendWorkSheet()
.
.
.
.
'HIGHLIGHT BLANK CELLS
[Code].....
I occasionally give presentations with Excel and would like to make it easier for the audience to see a particular cell when I move to it. The cursor can be tiny, and some people have a hard time seeing the cursor, so I use the keyboard to navigate to the cells I talk about. Yet, the cell, which then has a border around it, still can be hard to see.
Is there a way in Excel to have a cell that is highlighted, that is I move to a cell with the keyboard, so that it pops out in a different font color or background or format, when I move to it, and it automatically reverts to its usual format and color when I move away from it?
I am creating a spreadsheet for my job and knew a code or any way to implement this into my spreadsheet.
View 1 Replies View RelatedI was looking to use the VBA conditional formatting script posted on OzGrid and was curious if it would be easy to make some slight modifications.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:A10")) Is Nothing Then
Select Case Target
Case 1 To 5
icolor = 6
Case 6 To 10
icolor = 12
Case 11 To 15
icolor = 7
Case 16 To 20 ..........................
I can see that Case is the number range referenced to change the background...However, would it be possible to have it read a cells value as the criteria for the color change? Currently, I would like it to reference values in range I2:M2 and anything matching those cells in range A4:E28 change background to icolor = 30. I'm just not sure what to replace Case with to make it refence cells I2:M2
I have a matrix with numbers that each cell is composed by a function of two parameters (two columns). The formula is
"=COUNTIFS(T2:T99,"15",V2:V99,"14")",
So it's counts when in one cell column I receive 15 and in the other 14. For instance, I receive the number 3 - so I have three rows that match (the first column with 15 and the second with 14).
I want, when I select the cell from the matrix (table) with the number 3 (that I receive from the formula) it will highlight the relevant rows..
code which highlights a cell depending on the criteria of another cell.
Example.
In B1 I have the formula =NOW() (we all now what this means).
In B2 I have a completion date.
I would like A2 to fill with a specified colour.
Can this be done so that it works down the whole sheet, if the date is in B5 then only A5 will highlight so basically only the A cell on the same row will change depending on the date in B on the corresponding row?
I need the code for formatting to be edited, so that it work dynamically for any range
VB:
Range("B16:L16").Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
Selection.Borders(xlEdgeLeft).LineStyle = xlNone
With Selection.Borders(xlEdgeTop)
[Code] .....
Here the columns "B" and "L" shall be constant, but the number 16 may vary depending upon the number of lines in the sheet.
I would like to restore the currency format including the $ and three decimal point commas.
=MIN('2Data'!E2:E500)&(" - ")&MAX('2Data'!E2:E500)
I have a list of names that belong to a particular group. What I want is to conditional format a sheet so that if a name is entered that does not belong to the group it is highlighted red. Don't really know how to do this though?
View 4 Replies View RelatedI have a spreadsheet that has a table listing employee names in the far left hand column (A1, B1, C1, etc.). The table has a simple border - black line throughout.
I need the entire row for the employee to change to no border if the employee's name is deleted.
Using the following conditional formatting formulas:
=(isblank(p99)) then the formatting of (applies to) C99:O99 will be in red and bold
=(d99="Prod.") then the formatting of C99:P99 will be blue and bold
but the results are not as expected. Is something wrong with these formulas?
A collection of cells as been set as range and named "ShowPrice_"
I want to set the number format for these cells to be "##0.000" using VBA
Code:
ShowPrice_.Format ("##0.000")
Martin