I have working macro but I need to share it with other people.
I have saved it as a xlam file.
I would like to make modification to my vba code or Excel settings such that the add-in become available as a click-able button on the Ribbon.
If I have a macro sequenced:
Code:
sub test_1(control as iribbon)
call macro1
call macro2
call macro3
call macro4
end sub
I adjust the CUI editor to
Code:
onAction="test_1"
I close everything down and save.
I open it up and click the button on the ribbon and it says it can not find the macro?
How to add the macros in existing excel ribbons.
For example - I have a two macro codes. One is change the Date Format from DD.MM.YYYY to MM/DD/YYYY and another one is Date Format from MM/DD/YYYY to YYYYMMDD.
I want to execute the macro from the customize ribbon through Add in Buttons.
See the attachment : Customize the ribbon with Macro code.jpg
I've been trying to research how to do this for a while now and still can't figure it out. My impression is that this is fairly straightforward in Excel 2010 since the menus and ribbons are easily customizable but not so in Excel 2007.
So far I can get macro shown as a button in the Quick Access Toolbar. But the issue is that I can't organize them or customize the icons.
Is there an accepted practice for this?
How to create a button on the Ribbon (after you have created a group), and connect this button with a VBA code. So you can avoid going to developer->Macros->find the code and click run.
View 3 Replies View RelatedIs it true that I have to enable macro and choose to trust access to the VBA project object model in order to create and run macros? It seems there is some security risk associated with making the workbook as macro enabled. What makes the commands run from the ribbon security free? Is it true that we can work around the macro security concern by creating a command button to the ribbon and run the macro from the command button? If yes, how come I could not find any discussion of creating the command buttons? I am using Excel 2007.
View 3 Replies View RelatedI have a pretty developed add-in I've created for use at work. It has 3 full custom ribbon tabs worth of buttons and boxes and other features that run all of the macros in the project. Everyone loves it. The only problem is, its only used when we work with customer statement excel files. When using Excel for other tasks it is annoying to have 3 extra, essentially useless tabs taking up space on the ribbon.
Is it possible to create a button and stick it on, say the Data tab, that will "Start" the add-in and make the 3 custom tabs visible? Ideally there would also be a button to "Close" the add-in or hide the extra tabs until they're needed as well, but how to customize for my specific needs.
I have a workbook that has a userform with some simple code to translate formulas from .FormulaLocal to .Formula, and back.
I use that workbook a lot to translate formulas I find on here to something my German XL2007 will understand. I thought it would be neat, as well as giving me the opportunity to learn something new, to have that functionality as an add-in, rather than having the workbook open all the time. It is easy enough to save the wb as an add-in, and I can see it in my add-in list, install or un-install it. What i can't figure out is how to put a button on the xl07 ribbon when the add in is installed so i can access it.
I'm making a Userform for commands I use a lot, like concatenation and highlighting cells. I placed a command button on the sheet that pops up whenever I open Excel. It's a bit awkward to have it on the sheet. Is there a way to place the button on the ribbon to get it out of the way? (I'm on an intermediary level with VBA
Another alternative would be to make a hide button on the userform, I guess. Once it disappears though I'd probably need another button to call it up again.
I currently upgrading some add-in to Excel 2007. This one concern a toolbar or Ribbon as they call it now. I am creating a toggle button using XML
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui">
<ribbon>
<tabs>
<tab id="rxTrading" label=" Trading" >
<group id="rxDownloadStockData" label="Download Stock Data" >
<button id="rxDownloadData" label="Download" onAction="rxDataStock_Download" />
<toggleButton id="rxEnableDisableDowwnload" label="Enable Download" />
</group>
</tab>
</tabs>
</ribbon>
</customUI>
How can I change the name of toggle button to "Disbale Download" after clicking on the toggle button? I am trying to find the answer on WROX Excel 200 VBA but I am lost.
Is it possible to edit and/or add extra symbols for the macro buttons? I mean to extended what the pallet offers Cutomsie Ribbon > Rename (As it is used to be before ribbon age with the ultra primitive built in symbol editor)
View 1 Replies View RelatedI have prepared an excel workbook with macros for a bill. In that I have protected the workbook (selected window also) after reduced the menu bar to just ribbon (HOME, INSERT,PAGELAYOUT,.......), so that I would get enough space. I have send it to my friends as WinRaR file. But when they open in their computer the sheet is not getting enough space to display the entire page as normally no body used to minimize the ribbon and formula bar. This is making lot of inconvenience. I tried one macro but it not recording the actions on ribbon.
View 4 Replies View RelatedI am trying to select something in VBA code in the Messages part of the ribbon and then Email Tags section of the outlook ribbon called Choose classification but not sure how to select this object. It is only available when you send a new email. I have been unable to paste a picture which would explain it better.
View 9 Replies View RelatedI ran a simple macro that I created in my workbook, got a run-time error, clicked debug, clicked reset to stop the macro running, and now all of the icons in my workbook are greyed out. I can select cells, change worksheets, enter information in cells etc....just I can't save the workbook, or select any of the icons on my ribbon / in the office menu. Would really like to avoid terminating the application as I made a number of changes that I didn't save (doh doh doh).
View 9 Replies View RelatedContext: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
[Code] .....
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
Context: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
VB:
[COLOR=#333333]Dim Btn As Button[/COLOR]
[COLOR=#333333]Dim rng As Range[/COLOR]
[COLOR=#333333]For I = 2 To RowCount + 1[/COLOR]
[COLOR=#333333]With Worksheets("Sheet1")[/COLOR]
[COLOR=#333333]Set rng = .Range("B" & I)[/COLOR]
[COLOR=#333333]Set Btn = .Buttons.Add(rng.Left, rng.Top, rng.Width, rng.Height)[/COLOR]
[Code]....
The following code is my Zip macro:
VB:
[COLOR=#333333]Sub Zip()[/COLOR]
[COLOR=#333333]Dim strDate As String, SavePath As String, sFName As String[/COLOR]
[COLOR=#333333]Dim oApp As Object, iCtr As Long, I As Integer[/COLOR]
[COLOR=#333333]Dim vArr, FileNameZip[/COLOR]
[COLOR=#333333]Dim FName() As Variant[/COLOR]
[Code]...
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
If data in A1, Sheet 2 = to A1, Sheet 1, then B1, Sheet 2= to B1 Sheet 1, otherwise Nil.
This will be put in Column B1 of Sheet 2 ....
I'm developing a Java app that calls a Macro. Is there anyway how to connect to HSQL DB table and insert data in it with VBA code ?
View 4 Replies View RelatedI have 14 ranges like this on the same spreadsheet and would like to print all of them based on the result in the target cells for the range of each to print. I currently have a macro button to print each range as you can see. Is it possible to connect these? What I have tried is cutting the End Sub and then the Dim r As Long but get errors.
View 4 Replies View RelatedI have 1 row of user entry cells (A1:Z1). To keep it simple, let’s say A1 is always 0 and Z1 is always 100.
The user can enter any positive number in any of the cells. For Case 1, let’s say ‘20’ in M1.
I want a set of formulas in A2:Z2 that fills in the values with straightlined values from 0 to 20 from A2:L2 and 20 to 100 in N2:Z2.
For Case 2, the user enters ‘10’ in M1 and ‘60’ in T1 and the formulas in A2:Z2 fill in the appropriate values that connect the empty cells (i.e., 0 to 10, then 10 to 60, then 60 to 100).
Basically, a user enters 1 or more numbers in 1 row, and the second row fills in all the non-entered cells with #s that are straightlined, thus ‘connecting the dots’.
I think a bunch of nested IF statements might work, but it’ll be hairy and nested IF statements are a resource hog. Any better ideas? I’m think maybe some INDEX and MATCH functions.
I need to connect my two sheets using the value in a column...
Is it possible in Excel?
Actually in one sheet i have only the empno number and his performance report.
(in tabular form)
but in other sheet i have full information about that employee, So I wanna click on any empno and jump to other sheet to see details about that employee...
I cannot use hyper link as i have 50,000 employees and it will be very tedious to hyperlink all of them one by one...
I wanted to know whether this can be done in excel-- i.e connecting image with a alphabet .
What I want is , when I click on a alphabet on my keyboard , a particular preadjusted image(by the user) must appear . Is it possible??
Is there any way I can create this program in excel.?
I have a some problem with connecting between VBA Excel and web site.
I wrote a macro to insert the data from excel but there is one problem with displaying the correct view.
I use this site to get the price of the bonds:
[url]
it is the site of russian exchange
First of all I write the ISIN code, for example RU000A0E6X12, in the "Quote Search" field and then press Enter for getting the data. After it I can choose the History information or Online from the last field in the left margin. I want to chose "History" and after it the dates from and till are appearing automatically. The automatization of it is my task. And I have only one problem in the end.
The program:
I have a data and it has been plotted into a graph. Here's what i have: I have 2 points, point A and point B with caps, 1.00 and 2.00 respectively. So now i need to draw 3 parallel lines, i.e from the caps and the main point itself. How do i do that? Manually will be of course selecting a line from the shapes. Any suggestions?
View 14 Replies View RelatedI need to connect to an Oracle 10g database using vba. Google has loads of snipets of code but I don't seem to be able to get it to quite work correctly.
This is what I have:
Code:
Sub ADOExcelSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
[code]....
When the connection attempts to open (red code) I get the following error:
Run-time error '-2147467259 (80004005)':
[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed
My best guess is that I do not have the correct drivers installed... If this is the case which drivers do I need and where can you get them from?
I would like to do a sort of lookup function, but am having trouble.
What I would like to do is:
In one column, list all financial years (ie 2006-07, 2007-08 etc - listed in cells A2 - A10). In a particular cell, I will have a date, lets say cell B2. Then in cell B3, I would like to know which financial year that this date in B2 fits in. So for example, if the date was 10/10/2007, it would return the following "2007-08".
I have the following formula to calculate the angle a connecting rod of a piston should be
P3 is the length of the crank
P4 is the length of the connecting rod
and K42 is the angle of the crank
=PI()-ASIN(P3*SIN(K42)/P4)
Whats the purpose of taking pie away at the start?
I want to make simple Combobox with two dropdown lists throwing me back cells values, but I never made that so I've got a little difficulties.
The sample combobox should look like this:
Clipboard01.png
For the left Dropdown list there's defined name of the range "ITEM1", and for the second - range named "ITEM2".
After user will choose something I want to have numbers of the items selected from the lists in cells "A1" and "A2", and run a macro after clicking OK. How can I do this?
I have a table and I need it to filter on the basis of a value entered in a different cell - but i want it to show all rows greater than and equal to that specific value.
Sub Testmacro()
filtercriteria = Range("H3").Value
Sheets("Report 1").ListObjects("Table1").Range.AutoFilter _
Field:=4, Criteria1:=">=filtercriteria"
End Sub