Connecting Named Range With ComboBox?

Jun 16, 2014

I want to make simple Combobox with two dropdown lists throwing me back cells values, but I never made that so I've got a little difficulties.

The sample combobox should look like this:

Clipboard01.png

For the left Dropdown list there's defined name of the range "ITEM1", and for the second - range named "ITEM2".

After user will choose something I want to have numbers of the items selected from the lists in cells "A1" and "A2", and run a macro after clicking OK. How can I do this?

View 1 Replies


ADVERTISEMENT

Connecting Excel To Access Queries - Named Ranges

Jan 11, 2014

So I have an excel workbook that is connected to an Access database I use. When the workbook opens, it refreshes the data from a couple queries in Access. However, every time it refreshes the data, it modifies several named ranges pulling from areas of those tables.

Example: $A$2:$A$50000 becomes $A$2:$A$50002 if there are two new lines entered into the table.

Because of this, some of the lookups and arrays I use are mismatching and giving errors. How to prevent the ranges from updating when the table refreshes?

View 3 Replies View Related

Combobox With Named Range

May 23, 2007

'i use a combobox in a userform to show data from a hidden sheet its name is sheet5(sheet1).
'i defined the Range as ExpCat and put ==OFFSET(Sheet1!$M$3,0,0, COUNTA(Sheet1!$M3:$M9),1)
'and use this code to view the data, but the code shows the data of the activesheet.

Private Sub ComboBox1_Click()
Me.ComboBox1 = ThisWorkbook.Worksheets(5).Range("ExpCat").Value
'Me.ComboBox1 = ThisWorkbook.Sheet5.Range("ExpCat").Value

End Sub

View 9 Replies View Related

Populate ComboBox With Named Range

Jan 9, 2007

I use

Set rnData = ActiveSheet. Range("ProductList")
vaData = rnData.Value

With Me.model
.Clear
.List = vaData
.ListIndex = -1
End With

to populate a combobox list. 'ProductList' is a Dynamic Named Range with the definition

=OFFSET(Stock_List!$L$2,0,0, COUNTA(Stock_List!$L:$L)-1,1)

The '-1' allows for a heading at the top of the column.
This works fine when the list in col. L has more than one entry under the heading. But with only one entry I get 'Runtime error 381 - Could not set the List property, Invalid property array index' and the debug highlights on

.list=vaData

View 9 Replies View Related

ComboBox Add Entry To Named Range If Not In List

Feb 4, 2014

I am trying to work up a referral tracker for my wife's employer. I have Named Ranges on sheet 2, a running log on sheet 1. I also have a userform that is being populated from the ranges on sheet 2. I have the project mostly functional, except for a feature I would like to add in. I am interested in adding to the named range that is being accessed if the entry is not in list, via the combobox1 on the userform. Also, if possible, I would like the list to re-sort behind the scenes so the added entry is properly located in A-Z format for next time. After searching the web a bit, I found some code that might work with some tinkering, but currently I am having issues with it. Here is the bit I am trying to use.

[Code] ....

I have been getting 424 Object Errors and a few others as I continue to mess with this. I am also attaching the project if someone may see a better way of getting the task accomplished. The overall scope of this is to log all referral sources so monthly and yearly reports could be made.

Attached File : Copy of Referal Tracker.xlsm‎

View 3 Replies View Related

Have Output Cell Of ActiveX Combobox Link To Named Range?

Apr 22, 2013

=AVERAGEIFS(MFI,DATE,">="&JanStart,DATE,"<="&JanEnd)

MFI is the named ranged that is referencing a column of data. This works, but I want to be able to change the MFI to a different named ranged.

So what I am trying to do is using an ActiveX Combo box so I can reference the named ranges that I have set, for example MFI, so each time a user chooses MFI or another named range, it will output to a linked cell (A1). Then the linked cell will be referenced into this forumla.

=AVERAGEIFS(A1,DATE,">="&JanStart,DATE,"<="&JanEnd)

Is it possible for A1 to be linked to the named range, so if the user choses MFI in the combo box, it will change all AverageIFS formulas to look at a different named range.

View 3 Replies View Related

Add Dynamic Named Range To Combobox In Userform - Runtime Error

Oct 8, 2013

I'm trying to add a dynamic named range to a combo box in Userform but getting this error.

Have tried several lines of code this being the last that hasn't worked . . . .

Code:
CustCBx.RowSource = Range("CustList").Value

This is the formula for the named range in sheet

Code:
='Customer Info'!$J$2:INDEX('Customer Info'!$J2:$J200,COUNTA('Customer Info'!$J2:$J200))

View 1 Replies View Related

Copy Named Range Data To Worksheet Based On Dropdown Or Combobox

Feb 10, 2013

I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.

Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.

View 9 Replies View Related

Combobox Addition To Rowsource In Dynamic Named Range Corrupting Table

Aug 10, 2014

My Userform with combobox entries for product checks against the rowsource and if not on the list, is added to the list. the list is a named range in a Table that is used in a data model.

No matter which way I try I am regularly getting a corruption in the table that is home to the named range which is the rowsource... after one or two entries from the userform.

The rowsource is not bound to the worksheet, it is populated at userform_initialize procedure. (There are 4 combobox drawing from same rouwsource hence the loop through to check each)

debug points to the line at which conbobox value is being entered into the rowsource, though not always - it sometimes just crashes the whole file and everything needs restarting, upon which the table is fine and entry is evident.

I have tried resize, addrow to bottom of table variations and all result in the same core problem of a table corruption that crashes the file.

View 4 Replies View Related

Connecting A Date To A Range

Jun 7, 2007

I would like to do a sort of lookup function, but am having trouble.

What I would like to do is:

In one column, list all financial years (ie 2006-07, 2007-08 etc - listed in cells A2 - A10). In a particular cell, I will have a date, lets say cell B2. Then in cell B3, I would like to know which financial year that this date in B2 fits in. So for example, if the date was 10/10/2007, it would return the following "2007-08".

View 9 Replies View Related

Determining If Cell Is Part Of Named Range And What That Named Range Is?

Aug 16, 2014

Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:

Code] .....

here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.

View 5 Replies View Related

Named Ranges On Multiple Sheets With The Same Named Range & I Cant Figure Out How To Do This

Jun 2, 2006

I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...

View 2 Replies View Related

Making Named Range The Last Active Value Used Within Another Named Range?

Jul 19, 2013

I'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.

Picture2.jpg

Using the following code when updating just one criteria with several charts

VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)

If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....

which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.

View 2 Replies View Related

Filter Named Lists For Use In ComboBox/Drop-down Box

Aug 29, 2006

I have a workbook that lists a number of customers and the products that they use. I am trying to create a lookup that will follow the following process;

1 - User enters (via dropdown selection) Customer Id

2 - User enters (via filtered dropdown based on the 1st selection) Product

3 - User enters (via filtered dropdown based on the 1st and 2nd selections) Pack Size

4 - Product Id autofills itself.

My problem is twofold, firstly I don't know how to perform the "filters" in stages 2 and 3, and secondly I want to remove duplications from all lists at the appropriate times.

View 3 Replies View Related

Fill ComboBox With Names Of Named Ranges

Mar 5, 2008

The combobox is on a userform. This is the code I'm using to populate the Combobox

For Each nName In ThisWorkbook. Names
ComboBox3.AddItem nName.Name
Next nName

I tried to your reply but i get a object error

View 5 Replies View Related

Countif- Use A Named Criteria As Well As A Named Range

Oct 25, 2009

if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,

View 9 Replies View Related

Combine Two Named Ranges Into 3rd Named Range

Mar 14, 2013

Merge two columns into one list in excel

I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).

Here's the formula from the example:

Code:

=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))

I've played around with it, but could not come with any that worked.

View 3 Replies View Related

Excel 2007 :: Populate Userform Combobox With Named Dynamic List

Aug 21, 2014

Excel 2007 and very new to VBA...

I have a userform (named "QAReviewForm") with a combobox (named "cboSupName"). I want it to populate with my named range "SupList".

FYI, the SupList is found on sheet 2, "Administrative Menu" in column E. E1 contains the heading "Supervisors", and my named range formula is

Formula:

[Code ] .....

When it runs, my form opens and the combobox is there, but nothing appears as options for me to select (yes, I have some values in column E).

View 11 Replies View Related

Copy/Paste Cell To Named Range Named In Adjacent Cell

Sep 4, 2007

I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.

The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.

Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")

Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select

i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop

View 8 Replies View Related

Find Matched Value In A Range For Named Cell Then Copy Range Cells Below

Aug 6, 2013

I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.

The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.

View 9 Replies View Related

Dynamic Named Range Sort Including Cells Outside Defined Range

Apr 3, 2008

Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:

=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)

When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....

View 9 Replies View Related

VBA To Get Average Of Range Of Cells Based On Named Range In Different Column

Apr 10, 2013

I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.

I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.

View 1 Replies View Related

Creating Named Range Taking Avg To Date Of Dynamic Range

Jul 15, 2014

I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.

View 1 Replies View Related

Get The Range Address Of A Dynamically Named Range That Refers To A Formula In VBA

Aug 10, 2008

I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.

I have another named range that actually refers to a range. Call it AllData.

Column A
Row2 56
Row3 44
Row4 65

AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))

How to I obtain an address of AllData_UsedRange in VBA code?

These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))

View 9 Replies View Related

Stop Graph From Changing Named Range To Formula Range

Sep 8, 2006

I am trying to create a graph for a range of data that updates monthly (adding an extra month each time). I wanted the graph source data to update automatically each time the data is refreshed so used an OFFSET formula to identify a named range. I then point the graph to the named range as the source data.

When I enter the range as the source data the graph picks it up. However, when I re-enter the source data option on the graph it has converted the named range into a cell written range (ie. replaces "=QUALITY" with "='Front page'!$B$7:$J$10" - which therefore will not update when the range increases.

View 4 Replies View Related

Fill ComboBox With Cell Range And Link ComboBox To Cell?

Oct 15, 2006

I have two questions.

1). I have dates listed in excel (01/01/2006 to 12/31/2006) say from range B12:B376.

How do I get these values to a ComboBox.

2). If the above is possible and if I select a value in ComboBox say 08/07/2006, it should get updated in a particular cell say A1

So selection of 08/07/2006 in ComboBox, should reflect 08/07/2006 in cell A1.

Note: This ComboBox is on the UserForm and not on the Excel Sheet.

View 7 Replies View Related

Match Named Range To Range/Cell Address

Aug 25, 2006

I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?

View 4 Replies View Related

Convert Dynamic Range To Static Named Range

Sep 13, 2007

My searches have not produced anything that I could apply to this situation.

I'm trying to write VBA that would:

1. Search a Workbook for Dynamic Ranges.

2. When a Dynamic Range is found the code would:

A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"

3. Save Changes.

4. Close File.

My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.

View 9 Replies View Related

Connecting Two Sheets

Nov 25, 2008

If data in A1, Sheet 2 = to A1, Sheet 1, then B1, Sheet 2= to B1 Sheet 1, otherwise Nil.

This will be put in Column B1 of Sheet 2 ....

View 12 Replies View Related

Connecting VBA To HSQLDB?

Aug 18, 2014

I'm developing a Java app that calls a Macro. Is there anyway how to connect to HSQL DB table and insert data in it with VBA code ?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved