If I have a macro sequenced:
Code:
sub test_1(control as iribbon)
call macro1
call macro2
call macro3
call macro4
end sub
I adjust the CUI editor to
Code:
onAction="test_1"
I close everything down and save.
I open it up and click the button on the ribbon and it says it can not find the macro?
I have working macro but I need to share it with other people.
I have saved it as a xlam file.
I would like to make modification to my vba code or Excel settings such that the add-in become available as a click-able button on the Ribbon.
How to add the macros in existing excel ribbons.
For example - I have a two macro codes. One is change the Date Format from DD.MM.YYYY to MM/DD/YYYY and another one is Date Format from MM/DD/YYYY to YYYYMMDD.
I want to execute the macro from the customize ribbon through Add in Buttons.
See the attachment : Customize the ribbon with Macro code.jpg
I've been trying to research how to do this for a while now and still can't figure it out. My impression is that this is fairly straightforward in Excel 2010 since the menus and ribbons are easily customizable but not so in Excel 2007.
So far I can get macro shown as a button in the Quick Access Toolbar. But the issue is that I can't organize them or customize the icons.
Is there an accepted practice for this?
I'm trying to set up a macro to to run and control the AutoFilter in my Excel Spread Sheet. Essentially, all i want to be able to acheive is, instead of inputting the cryteria myself in the auto filter, i want the macro to select the cryteria from a specific cell.
Example...
Running the autofilter, normally you would select "equals or grater than" option and you would input a figure then click the "or" option then input "equals or less than" and a new figure and then click ok. This would sort the range; see the example macro...
Selection.AutoFilter Field:=10, Criteria1:=">=01/09/207", Operator:=xlOr _
, Criteria2:="<=31/09/2007"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
What i want to beable to do is to run a macro which will do the above but instead or requiring the user to input the range cryteria for the filter it would point to a cell to get the value from.
' test1 Macro
' Macro recorded 06/08/2007 by Nigel M Bailey
'
Selection.AutoFilter Field:=10, Criteria1:="> Cell A2", Operator:=xlOr _
, Criteria2:="< Cell A3"
ActiveCell.Offset(774, -1).Range("A1").Select
ActiveWindow.SmallScroll Down:=-15
End Sub
In doing this i can validate the selection field and just add a search button which then will be perfect!
How to create a button on the Ribbon (after you have created a group), and connect this button with a VBA code. So you can avoid going to developer->Macros->find the code and click run.
View 3 Replies View RelatedIve got a cell on a worksheet, that is controlled by a Control combo box. Is there anyway to change the value of the cell, and therefore the combo box, by using a macro. I need the macro to activate when the workbook is exited.
View 3 Replies View RelatedIs it true that I have to enable macro and choose to trust access to the VBA project object model in order to create and run macros? It seems there is some security risk associated with making the workbook as macro enabled. What makes the commands run from the ribbon security free? Is it true that we can work around the macro security concern by creating a command button to the ribbon and run the macro from the command button? If yes, how come I could not find any discussion of creating the command buttons? I am using Excel 2007.
View 3 Replies View RelatedI have a pretty developed add-in I've created for use at work. It has 3 full custom ribbon tabs worth of buttons and boxes and other features that run all of the macros in the project. Everyone loves it. The only problem is, its only used when we work with customer statement excel files. When using Excel for other tasks it is annoying to have 3 extra, essentially useless tabs taking up space on the ribbon.
Is it possible to create a button and stick it on, say the Data tab, that will "Start" the add-in and make the 3 custom tabs visible? Ideally there would also be a button to "Close" the add-in or hide the extra tabs until they're needed as well, but how to customize for my specific needs.
I have a workbook that has a userform with some simple code to translate formulas from .FormulaLocal to .Formula, and back.
I use that workbook a lot to translate formulas I find on here to something my German XL2007 will understand. I thought it would be neat, as well as giving me the opportunity to learn something new, to have that functionality as an add-in, rather than having the workbook open all the time. It is easy enough to save the wb as an add-in, and I can see it in my add-in list, install or un-install it. What i can't figure out is how to put a button on the xl07 ribbon when the add in is installed so i can access it.
I'm making a Userform for commands I use a lot, like concatenation and highlighting cells. I placed a command button on the sheet that pops up whenever I open Excel. It's a bit awkward to have it on the sheet. Is there a way to place the button on the ribbon to get it out of the way? (I'm on an intermediary level with VBA
Another alternative would be to make a hide button on the userform, I guess. Once it disappears though I'd probably need another button to call it up again.
I currently upgrading some add-in to Excel 2007. This one concern a toolbar or Ribbon as they call it now. I am creating a toggle button using XML
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui">
<ribbon>
<tabs>
<tab id="rxTrading" label=" Trading" >
<group id="rxDownloadStockData" label="Download Stock Data" >
<button id="rxDownloadData" label="Download" onAction="rxDataStock_Download" />
<toggleButton id="rxEnableDisableDowwnload" label="Enable Download" />
</group>
</tab>
</tabs>
</ribbon>
</customUI>
How can I change the name of toggle button to "Disbale Download" after clicking on the toggle button? I am trying to find the answer on WROX Excel 200 VBA but I am lost.
Is it possible to edit and/or add extra symbols for the macro buttons? I mean to extended what the pallet offers Cutomsie Ribbon > Rename (As it is used to be before ribbon age with the ultra primitive built in symbol editor)
View 1 Replies View RelatedI have prepared an excel workbook with macros for a bill. In that I have protected the workbook (selected window also) after reduced the menu bar to just ribbon (HOME, INSERT,PAGELAYOUT,.......), so that I would get enough space. I have send it to my friends as WinRaR file. But when they open in their computer the sheet is not getting enough space to display the entire page as normally no body used to minimize the ribbon and formula bar. This is making lot of inconvenience. I tried one macro but it not recording the actions on ribbon.
View 4 Replies View RelatedI am having a with a controlled loop. If the loop is on the last pass and an error occurs, it goes into a never ending loop. Once the error portion of code is excuted, the code resumes to the same line. I'm not sure how to solve this problem. I have attached a sample file with all code if needed.
View 2 Replies View RelatedFor a = 11 To 14
b = 10
If Cells(a, b) = 3 Then
ActiveCell.Offset(0, 0).Range("A1").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-2]>0,RC[-2],"""")"
ActiveCell.Offset(2, 0).Range("A1").Select
End If
Next a
question : if i want to start the looping from the cell i am standing at instead of the defined a=11 to 14 , how ?
or
question : if i want to start the looping controlled by the cell value of the present worksheet say the value of a1 is 19 , and b1 is 30 , then it becomes : for a= 19 to 30 ,how
I am trying to select something in VBA code in the Messages part of the ribbon and then Email Tags section of the outlook ribbon called Choose classification but not sure how to select this object. It is only available when you send a new email. I have been unable to paste a picture which would explain it better.
View 9 Replies View RelatedI ran a simple macro that I created in my workbook, got a run-time error, clicked debug, clicked reset to stop the macro running, and now all of the icons in my workbook are greyed out. I can select cells, change worksheets, enter information in cells etc....just I can't save the workbook, or select any of the icons on my ribbon / in the office menu. Would really like to avoid terminating the application as I made a number of changes that I didn't save (doh doh doh).
View 9 Replies View RelatedI have a table with job numbers in one column and sub tasks for each job in a seperate column. I want to control the filter in the jobs column with a data validation cell. The data validation cell has all the job numbers in it and when I select job number "XYZ" in the data validation cell all other jobs are filtered out of the table.
View 1 Replies View RelatedI have 5 macros to be run in sequence. I have copied them into the file attached with ----- line as separator between them.
How can I possibly combine them all into ONE MACRO?
Step 1. In Col E a list of amounts will be pasted on a daily basis.
Step2. I need a macro that will look at the last code in Col F and apply the next sequence so $36,543.00 will have OPS003, since i might paste more than one amount in Col E i would like the macro to do the same thing also in Col F. I have a formula in G which will tell me what amounts are outstanding and which have cleared.
AmountCode 12,545.00 OPS001 1,236.00 OPS002 36,543.00
I'm use to highlighting two cells, find the plus, and copying a list of numbers down about 10 rows. Is there a macro instruction or VB instruction that will do the same?
Example,
Before:
G1010
G1011
After:
G1010
G1011
G1012
G1013
G1014
G1015
G1016
G1017
G1018
G1019
G1010
G1011
I have found a macro that should work with a change of a specific cell.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$7" Then
Call Button
End If
End Sub
However, the code doesn t work as with a change of A7 nothing happens.
A7 equals to result from a drop down list --> A7=A5(which is a drop down list value). The "Button" macro is a combination of 4 macros that get rid of zero values and names in pie charts (maybe this plays any role). The master macro is assigned to an object. The code is:
Sub Button1()
Sheets("report").Select
ActiveSheet.ChartObjects("Chart 140").Activate
ActiveChart.SeriesCollection(1).ApplyDataLabels AutoText:=True, LegendKey:= _
False, HasLeaderLines:=True, ShowSeriesName:=False, ShowCategoryName:= _
True, ShowValue:=True, ShowPercentage:=False, ShowBubbleSize:=False, _
Separator:=" "...................
I have a sheet with hundreds of rows of customer information; including a 7 digit customer number. I need a macro to delete all the rows where the customer number sequence start with 1 thru 8 (that would be the first digit of the customer numbers).
View 9 Replies View RelatedI have a document that is a subject index for book that has terms that reference page numbers. The structure is for example: Employment, 587, 592, 553, 605, 233 The term is always following by comma and then space and listing of page numbers that subject reference applies. In many cases the page number references are out of sequence and I need them to be in numerical sequence. i.e. Employment, 233, 553, 587, 592, 605 There are many subject terms in index and need to check and fix sequence of page references for each.
View 6 Replies View RelatedI have a very big Excel file (62 MB). I need to be able to filter by one column (FACILITY) and sort the whole file using the (REGISTRATION NO) column as well as finding the missing sequence number in the (REGISTRATION NO) column. The problem is that the (FACILITY) column has more than 200 different facility name. I am thinking of macro as I have different Spreadsheet I need to do the same steps in each one separately.
I have attached a copy (example from the data that I have) .
Context: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
[Code] .....
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
Context: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
VB:
[COLOR=#333333]Dim Btn As Button[/COLOR]
[COLOR=#333333]Dim rng As Range[/COLOR]
[COLOR=#333333]For I = 2 To RowCount + 1[/COLOR]
[COLOR=#333333]With Worksheets("Sheet1")[/COLOR]
[COLOR=#333333]Set rng = .Range("B" & I)[/COLOR]
[COLOR=#333333]Set Btn = .Buttons.Add(rng.Left, rng.Top, rng.Width, rng.Height)[/COLOR]
[Code]....
The following code is my Zip macro:
VB:
[COLOR=#333333]Sub Zip()[/COLOR]
[COLOR=#333333]Dim strDate As String, SavePath As String, sFName As String[/COLOR]
[COLOR=#333333]Dim oApp As Object, iCtr As Long, I As Integer[/COLOR]
[COLOR=#333333]Dim vArr, FileNameZip[/COLOR]
[COLOR=#333333]Dim FName() As Variant[/COLOR]
[Code]...
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
I've recorded a macro that copies an entire tab into a new spreadsheet then goes on the copy and paste information from one tab to another.
When I run the macro from the Tools>Macros menu it works perfectly.
But when I copy the code and add it to that of a button it fails and posts the following error: Run-time error '1001': Select method of Range class failed.
The first attachement shows the code for the macro as it is alone, and the second shows how I simply copied and pasted it into the 'view code' window of the button.
Needless to say I'm a beginner at macros and only every record them, I can usually make stuff work that way but this has me stumped!