Move Or Place Command Button Onto Ribbon?
Jun 4, 2012
I'm making a Userform for commands I use a lot, like concatenation and highlighting cells. I placed a command button on the sheet that pops up whenever I open Excel. It's a bit awkward to have it on the sheet. Is there a way to place the button on the ribbon to get it out of the way? (I'm on an intermediary level with VBA
Another alternative would be to make a hide button on the userform, I guess. Once it disappears though I'd probably need another button to call it up again.
View 5 Replies
ADVERTISEMENT
Mar 17, 2009
Is it true that I have to enable macro and choose to trust access to the VBA project object model in order to create and run macros? It seems there is some security risk associated with making the workbook as macro enabled. What makes the commands run from the ribbon security free? Is it true that we can work around the macro security concern by creating a command button to the ribbon and run the macro from the command button? If yes, how come I could not find any discussion of creating the command buttons? I am using Excel 2007.
View 3 Replies
View Related
Mar 31, 2007
I have two sheets and two listbox's(ColumnCount8) and one command button.
lstInYard rowsource is set to sheet1
lstMilled rowsorce is set to sheet3
Iam trying to cut and paste the selections in lstInYard to lstMilled as well as the corrosponding row values in sheet1 to sheet3 by using cmdMoveSelected click event.
View 9 Replies
View Related
Jun 15, 2009
What's the easiest way to remove all old commandbar / ribbon customizations from Excel 2007? Do I need to know names? How do I find those? It's ok if everything else is set to factory defaults too.
There's two thing I know about those customizations
1) When I right click a cell, it says "Clear All" three times. Each of those should be removed.
2) In the Ribbon there's a tab "TestiTab". It should be removed.
Nothing of those needs to be saved.
View 9 Replies
View Related
Aug 13, 2014
How to create a button on the Ribbon (after you have created a group), and connect this button with a VBA code. So you can avoid going to developer->Macros->find the code and click run.
View 3 Replies
View Related
Aug 8, 2013
I have a pretty developed add-in I've created for use at work. It has 3 full custom ribbon tabs worth of buttons and boxes and other features that run all of the macros in the project. Everyone loves it. The only problem is, its only used when we work with customer statement excel files. When using Excel for other tasks it is annoying to have 3 extra, essentially useless tabs taking up space on the ribbon.
Is it possible to create a button and stick it on, say the Data tab, that will "Start" the add-in and make the 3 custom tabs visible? Ideally there would also be a button to "Close" the add-in or hide the extra tabs until they're needed as well, but how to customize for my specific needs.
View 1 Replies
View Related
Feb 7, 2014
I have working macro but I need to share it with other people.
I have saved it as a xlam file.
I would like to make modification to my vba code or Excel settings such that the add-in become available as a click-able button on the Ribbon.
View 2 Replies
View Related
Jan 24, 2009
I have a workbook that has a userform with some simple code to translate formulas from .FormulaLocal to .Formula, and back.
I use that workbook a lot to translate formulas I find on here to something my German XL2007 will understand. I thought it would be neat, as well as giving me the opportunity to learn something new, to have that functionality as an add-in, rather than having the workbook open all the time. It is easy enough to save the wb as an add-in, and I can see it in my add-in list, install or un-install it. What i can't figure out is how to put a button on the xl07 ribbon when the add in is installed so i can access it.
View 9 Replies
View Related
Apr 14, 2009
Is it possible that when you press a command button, that the first thing it does is to execute the code assigned to another command button (IE in another sub).
View 9 Replies
View Related
Feb 4, 2014
If I have a macro sequenced:
Code:
sub test_1(control as iribbon)
call macro1
call macro2
call macro3
call macro4
end sub
I adjust the CUI editor to
Code:
onAction="test_1"
I close everything down and save.
I open it up and click the button on the ribbon and it says it can not find the macro?
View 9 Replies
View Related
Jul 1, 2008
I currently upgrading some add-in to Excel 2007. This one concern a toolbar or Ribbon as they call it now. I am creating a toggle button using XML
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui">
<ribbon>
<tabs>
<tab id="rxTrading" label=" Trading" >
<group id="rxDownloadStockData" label="Download Stock Data" >
<button id="rxDownloadData" label="Download" onAction="rxDataStock_Download" />
<toggleButton id="rxEnableDisableDowwnload" label="Enable Download" />
</group>
</tab>
</tabs>
</ribbon>
</customUI>
How can I change the name of toggle button to "Disbale Download" after clicking on the toggle button? I am trying to find the answer on WROX Excel 200 VBA but I am lost.
View 2 Replies
View Related
Apr 4, 2013
How to add the macros in existing excel ribbons.
For example - I have a two macro codes. One is change the Date Format from DD.MM.YYYY to MM/DD/YYYY and another one is Date Format from MM/DD/YYYY to YYYYMMDD.
I want to execute the macro from the customize ribbon through Add in Buttons.
See the attachment : Customize the ribbon with Macro code.jpg
View 1 Replies
View Related
Aug 9, 2013
I've been trying to research how to do this for a while now and still can't figure it out. My impression is that this is fairly straightforward in Excel 2010 since the menus and ribbons are easily customizable but not so in Excel 2007.
So far I can get macro shown as a button in the Quick Access Toolbar. But the issue is that I can't organize them or customize the icons.
Is there an accepted practice for this?
View 4 Replies
View Related
Feb 3, 2010
How can I return name of a command button on click? I want to create some sort buttons on a sheet I will use regularly to speed things up. I thought if I could call each sort button by the column letter the button sits in I can use this in a single sub for all buttons
e.g the button sitting in column A is called "A". when i click the button, it returns it's name to a variable which I can then use to sort column A. I know I could create a seperate routine for each button but I was just trying to think of something neater.
View 2 Replies
View Related
Aug 31, 2007
I have a userform with a button on it named But1. Is it possible to store But1 into a variable then activate the But1_Click action using a variable?
Dim strButname As String
strButname ="But1"
Now, how would you activate the But1_Click method using strButname variable. With listboxes you can use the Control(strListboxName) methodology?
This doesn't work, but gives you an idea of what I am trying to do.
Controls(strButname)_click
View 9 Replies
View Related
Jan 7, 2010
how to get some command buttons to stick in one place? I currently have two in a summary sheet. Each button runs a similar code which clears and deletes (by shifting cells upward) at the start of the process, then populates data.
It's rather annoying though that I cant have the buttons stick to one zone, they end up moving left or right depending on which button I press. Each report also changes column sizes, dont know if that's relevant?
View 3 Replies
View Related
Nov 8, 2012
I currently am using a form button to create new rows.
I need two different kind of buttons. I have a button that does this-
VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range
[Code]....
However, when I try and create these codes using a Command button (I need it for the color), I get the error
"unable to get the buttons property of the Worksheet class"
P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.
View 4 Replies
View Related
Mar 9, 2013
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies
View Related
Oct 5, 2006
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
View 2 Replies
View Related
Jul 12, 2007
now I thought about recording the macro, but it's an offset and if you click the chart, then it'll mvoe somewhere else even though the charts are always placed in the middle when generated. So I think I need to place it in a specific range. I want to use XY coordinates or range labels or something to that effect but would like something to this affect:
With Charts.Add
.ChartWizard source:=Worksheets("sheet1").Range("a1:a20"), _
gallery:=xlLine, title:="February Data"
End With
I got that in VBA help, but I'm not using Chart wizard, my code just creates the chart from the data on its own with specific chart type. So anyway, how would I make it put each of my five charts for the 25 people in the same place for every person. Performance Errors etc etc etc all will go in the right place everytime, regardless if you start with the page scrolled. I should do range right, but how do I change this macro to do it without chart wizard...just a chart that's already created and named. QUESTION: How do I place charts that are created from a data source onto a specific area of one worksheet, and those charts are always in the same place regardless of the person'a name.
View 9 Replies
View Related
Aug 13, 2008
I have read several articles saying using a command button as a toggle button can't be done but some articles have said it is possible using the state properties.
.State = msobuttondown
.State = msobuttonup
Is there any way to combine this with the onaction property so that when you press the button, it stays down and activates a macro then when you press it again it pops back up and activates another macro.
View 8 Replies
View Related
May 25, 2009
Let`s assume that I have numerous "Serial Number" in "Sheet1" : http://i40.tinypic.com/2iqbspt.jpg
Now I want to create some cards in "Sheet2" that each card have a serial number that related serial number there is in "Sheet1" : http://i43.tinypic.com/34fz690.jpg. Need easy solution for doing it while when I drag one card to copying it then related serial number in sheet1 would be appear in required field. I mean first card has first serial number of sheet1 and second card has second serial number of sheet 1 ; but I want to doing it quickly with dragging.
View 4 Replies
View Related
Feb 12, 2009
Is is possible to automatically place a toggle button on a user form by entering data in a cell?
In otherwords, if I type a number in cell A1, can that number be automatically put on the toggle button and placed on active userform?
View 14 Replies
View Related
Sep 25, 2013
I need a macro code via the command box to move Sheet 1 H30 and I30 to Sheet 2 B57 and F57, RESPECTIVELY.
View 1 Replies
View Related
Jul 29, 2008
I have searched this topic but I came up with nothing regarding my exact situation.
I have 5 buttons on sheet 1. I want them to all direct me to another sheet in the same workbook. However, some buttons will contain more than one sheet.
Example: Button 1 will direct me to 4 different sheets. Is this possible?
Also, When I open the workbook, I see many sheets that I am working from but I do not want them to show up when I open the workbook. The only way to see these sheets is to click on the command buttons at the top of sheet 1.
View 10 Replies
View Related
Aug 20, 2009
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
View 3 Replies
View Related
Jul 6, 2007
Is it possible to check multiple checkboxes with a command button?
For example, I have 20 checkboxes (C5 to C25) when command button is clicked
C5, C12, C17, C20 would be checked.
View 10 Replies
View Related
Jun 12, 2014
how to keep a command button in a certain location even if the a row or Column is Deleted or Inserted into the worksheet?
View 1 Replies
View Related
Jul 31, 2014
I know that this may seem a little strange to request as you can just select the row and delete it, however the sheet is designed as "idiot proof", so I would like to implement this.
Basically, I have a box which states "If you need to delete a row due to incorrect entry, please type the row number here (next cell), and click delete".
I want to know if by using VBA, you can reference the number entered in the cell, and use this to determin the row in which we are required to delete.
View 8 Replies
View Related
Apr 29, 2008
I have a 2 worksheets. One "Projects in Process"and the other "Project Completed". when the users fill in the information in cells A4-F4 (line 4 is the starting line and it could go down as far as line 23 or a23 - f23) In Projects in Process they press a "completed Project" command button and the data in a4-f4 copies over to worksheet "Projects completed". In the next available row (starting at row 4).
View 13 Replies
View Related
