I would like to be able to execute a command line that will convert an Excel csv file to an Excel file that is TAB delimited. In other words, replace the comma delimiter with a TAB delimiter without having to open the file in Excel. I am an inexperienced Excel user
View 2 RepliesI is it possible to convert all comma separated text files in a single folder in to excel files. But the requirement is to have 2 sheets in each new file. first to be the full file - with all columns, and in the second sheet to keep only colum A B D G H K L M O P R S T V W from the first sheet. The second sheet name must be the same as the first one but without the first "wlist_" in the name.
One more thing. The third column in the second is called "COUL". there are short letters for colors in french
can they be converted with the sort in English like it goes:
NO = B
BA = W
RG = R
SO = P
JA = Y
BE = L
VE = GY
GR = G
VI = V
MA = BR
BJ = TA
OR = O
Here is a link to the both CSV and an example excel file with the end result. In this example i haven`t change the shorts for the colors. It takes me too much time with the find and replace function. And at the moment i`m really pushed from time.
[URL]
I have about 100 Excel files in one folder that need to be saved as text files. They can keep the same name, but simply need to be converted to text files. I'd like to use VBA for this and I can't find examples that do exactly that...or ones that my limited knowledge can handle.
Excel files exist in C:Source and ALL of them should be saved as text files in C:Destination. Maybe there is an easier way, but I thought for sure there was a routine I could use.
On a daily basis I open about 35 text files in Excel at one time, and then must responde to 35 dialog boxes:
"This file is not in a recognizable format" - I click OK
"Delimited or Fixed Width (default)" - I change to Delimited
"Delimiters listed with Tab as default" - I change to Space
I go through that 35 times. I don't save these files that I have opened, but once they are all open I paste each one in a separate worksheet in one workbook.
Can I at least change the defaults on these text boxes to Delimited, Space? That way I would just need to click on OK, then Finish for each file.
I am using Excel 2000.
I am working with Excel 2003 which has a limit of 256 columns. I often import text files into excel using a very simple macro. I specify the text file's name and location in a cell and then run the macro - it opens the text file, copies the data and pastes it into the worksheet, then delimiting the columns using the semi-colons that seperated the data in the original text file.
However, I now have a text file that would convert into excel as around 1,000 columns and about 20 rows. This obviously causes a problem since my limit is 256 columns in Excel 2003.
Is there any way that Excel can transpose my data when it brings it into the spreadsheet from the text file so that I end up with 20 columns and 1,000 rows? Ideally I'd do this in VBA and add the code onto my existing little macro
I use a macro that saves my activesheets in text(tab delimited).
I am trying to find how to save my worksheets as tab delimited files without having to open the notepad later, in order to press the backspace button. Just to clarify more, if a sheet has 15 rows of data, the tab delimited file will be created with 16. Is there a way to save the actual number of rows in the text file or this is a default operation in excel that cannot be changed in any way?
I have around 30 files each quarter which I need to convert from a text file to an excel spreadsheet. I am a beginner with VBA and am looking for generic code I can use for a macro to:
1. open a text file from a folder
2. delimited/tab/comma
3. format columns H, O, and AH into dates
4. 'leave a spot for me to insert my code to manipulate the data'
5. save the file as an excel spreadsheet to a folder with the same filename
6. loop to perform this task to all files in a folder and stop after the last file.
The dilemna I am having is that my text files do not have a suffix ".txt" after them.
They just have the file name ***MMDDYYYY. There are always 3 initials at the beginning which change for each file i.e. ABC06302009.
The date remains the same for the given quarter, i.e. ***06302009. Next quarter I will have to do this same thing for all files ***09302009.
is there any way for a worksheet to import and merge (append) tab delimited files from these directories:
C:TempmergeV¿ñdata.txt
C:TempmergeV¿ñ (2)data.txt
C:TempmergeV¿ñ (3)data.txt
C:TempmergeV¿ñ (4)data.txt
C:TempmergeV¿ñ (5)data.txt
- contents of data.txt have range A1:Pn, where 'n' is last row, different for each file
- found a previous thread very similar to what i wanted, but donno how to edit this to suit my purpose
[Solved] Importing: Import many TXT files to singe workshee
BTW, does VBA recognise directory folder with unicode characters? I can rename my directory if it doesn't.
How Do You Convert PDF Files Into An Excel File?
View 1 Replies View RelatedI Use the Quickbook 2009 for accounting. I need to convert CSV files over to QBO files. Any Software are not to Convert CSV files to QBO files.
It's Possible to Convert the CSV files to QBO Files via Excel.
I've been asked to change a massive batch of Excel 2007 files to 2003 format (to send to a client who doesn't have the newer version). Apart from going into these files (there's over 500 of 'em ), can anyone suggest a means of doing this? I know that Microsoft has a Migration Manager tool, but it appears this only converts the other way around.
View 2 Replies View RelatedBelow code Works for TAB delimeter but if there is ' ,' in a row its not reading correct data.Basically I am trying to read multiple .txt files to .csv .
Sub txt2csv()
Dim Fname As String, ipath As String, retstring, fs, a, i As Long
With Application.FileDialog(msoFileDialogFolderPicker)
[Code]....
Can you please help me enhancing the macro that you created for consolidating multiple workbooks into one. The macro creates worksheets based on the server names, can we create individual csv files as well for individual worksheets of the consolidated workbook?
View 9 Replies View RelatedI need to convert thousands of files from .csv to .xls format. Filenames are numbers (1.csv ... 20000.csv). Filenames do not change.
Could just open, Save As, and Close.
Is there a simple way to run a macro once and convert everything? I don't know how to code the macro to open one file, convert, then close, then open the next...
I have a lot of .txt files that needed to be converted to .csv file format. Right now I am doing it manually using MS Excel i.e. File > Open. For each file, I need to specify the length of each fields one by one, so it is quite an effort for me.
Is there any way to automate this process using MS Excel or any other existing programs?
1. I need your help in converting all the worksheets in a workbook to CSV format. Is it possible to do that with a macro?
2. I have 20 workbooks, each with 12 worksheets. I need to combine the data in all the workbooks to create a database. As I will not be
able to do that in Excel (due to the row limit), I am thinking of using MS Access.
Therefore I am planning to convert these excel files into CSV files and then use the CSV files to create an MS Access database.
Trying to write a script to carry out a number of tasks but is there code to enable an Excel to look in a particular file for the list of csv files - carry out the tasks and return the appropriate values in the Excel sheet whilst leaving the original csv files untouched?
View 2 Replies View RelatedNeed a way to update a single master file. What happens right now is that the cost manager sends out one file to a lot of different project heads and then on having them return back to him he basically has to individually add in all the data. What i am trying to do is that he somehow carries on sending out the data as there are a lottt of projects and then on returning them they automatically update.
how I can loop through folders to select files starting with a certain word and copy all of them to a different folder and rename them. The folder structure is given below
Company 1(parent folder)
North South East(sub folder) West(sub folder)
Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec
In the above structure, the files are present inside each folders Jan, feb...Dec under the regions North, South East n west. note that I have to select files starting with "Sales" and copy them into a new folder(say results) and rename copied files as Sales1.xls, Sales2.xls etc. (Files are not present in the folder company1, north, south, east and east.)
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
I'm using the following code to import thousands of html files into my spreadsheet. The code is working fine. Since I am importing thousands of files, when there is no more space on my worksheet, the code stops with an error message. I want to make this code add another worksheet & continue importing the html files until there are no more files to import.
Sub Master_Importer()
Dim I As Long
Dim strFilename As String
Dim strPath As String
strPath = "file:///C:/Documents and Settings/c/Desktop/New Folder/"
With Application.FileSearch
.LookIn = "C:Documents and SettingscDesktopNew Folder"
.FileType = msoFileTypeAllFiles
.Execute
For I = 1 To .FoundFiles.Count
strFilename = Mid(.FoundFiles(I), InStrRev(.FoundFiles(I), "") + 1)
With ActiveSheet.QueryTables.Add(Connection:= _
"URL;" & strPath & strFilename _ .......................
Is there a way to convert all files in folder, in this case, xml in excel format to xls without open them?
I recorded the macro below, but this needs to "Open" and "SaveAs" the current file in folder and there are a few thousands of xml files in folder.
I was wondering if through some ADO or VBA code this can be done without open the files in order to save resources and get the work done faster?
Code:
Sub Convert_XML_to_XLS()
Workbooks.Open Filename:="C:MyPathInputFile.xml"
ActiveWorkbook.SaveAs Filename:="C:MyPathInputFile.xlsx" _
, FileFormat:=xlOpenXMLWorkbook, CreateBackup:=False '
End Sub
Set up a quick piece of code to convert batches of .doc files to .pdfs
Question 1 : What is the proper syntax to add a filter to the FileDialog to only allow for .doc and .docx files
Code:
Sub DocTOpdf()
Dim s As Variant
Dim Res As Integer
Dim oWord As Object
[Code] .....
Question 2: It would seem that randomly when running the code a Run-time error -21467259 (80004005) occurs at
Code:
oWord.ActiveDocument.ExportAsFixedFormat OutputFileName:= _
s & ".pdf", ExportFormat:=wdExportFormatPDF, _
OpenAfterExport:=False, OptimizeFor:=wdExportOptimizeForOnScreen, Range:= _
wdExportAllDocument, From:=1, To:=1, Item:=wdExportDocumentContent, _
IncludeDocProps:=True, KeepIRM:=True, CreateBookmarks:= _
wdExportCreateNoBookmarks, DocStructureTags:=True, BitmapMissingFonts:= _
True, UseISO19005_1:=False
I am using this codes to extract csv in to my workbook, how to extract only the specific no. of rows from a csv instead of all the rows, I would like to extract only the last 5000 rows of data
Code:
Option Explicit
Sub ConvertCSVs()
Dim wkbDest As Workbook
Dim wksDest As Worksheet
Dim strPath As String
[Code] .........
I have a excel file that I enter information into. I have code that saves the files to a certain folder with the name, date, and time stamp for the file name. At the end of the day I might have 3 to 15 excel files I have created that day and I would like to take information from certain cells (examle: L3, B6, B7, B8, G8, and so on) and create a txt file with all of the information in it.
Example:
12/20/2007
Your Name
123 Somewhere St.
Here, OH 45111
Home Visit
12/20/2007
Someone Else
345 Anywhere St.
There, OH 45211
Hospital Visit
I have a set of workbooks-all located in the same folder-in which data are shown "horizontally"
i.e. file 1 - sheet1 looks more or less like this:
1 2 3
4 5 6
same with the other files.
what I am trying to achieve is that in another woorkbook, all the data are copied in one vertical vector
i.e
1
2
3
4
5
6 from file 1 and then
1
2
3
4
5
6 from file 2
I can seem to be able to resize the array to the correct size but the only values copied are for the last file. in the example that I have above, the result would look something like:
<empty>
<empty>
<empty>
<empty>
<empty>
<empty>
1
2
3
4
5
6
This is the code I have so far:
Sub Consolidate()
Dim a As Workbook
Dim b As Workbook
Dim x, y(), i&, j&, k&
Dim myPath As String
Dim filename As String
Dim wb As Workbook
[Code] .........
i have many file text which i want to open in an excel workbook in a way that each text file will be displayed in an excel sheet.
View 3 Replies View RelatedI have 50 files each with 1000 numbers in column A.
I need to compare every list with every other list and calculate the Pearson function.
I am ok with the vb code to compare every file with everyother.
I can do this by opening each file then closing but it takes too long.
Each of the 50 csv file names is in my destination workbook
I would like to define an array using the file name, then extract 2 lists without opening the files then perform the pearson function and place the value in the destination workbook. (The pearson function just measures the strength of correlation between 2 sets of numbers)
I have a large number of .txt files that are comma separated files (but not saved with the .csv extension) that I need to convert to files with the .csv extension.
Is there an easy way to do this for all files in a given folder? Ideally, the files don't even need to be opened as they are are quite large in size (70MB+) and there are a lot of them (500+).