Save Ranges In Multiple Files To Text Files
Dec 21, 2007
I have a excel file that I enter information into. I have code that saves the files to a certain folder with the name, date, and time stamp for the file name. At the end of the day I might have 3 to 15 excel files I have created that day and I would like to take information from certain cells (examle: L3, B6, B7, B8, G8, and so on) and create a txt file with all of the information in it.
Example:
12/20/2007
Your Name
123 Somewhere St.
Here, OH 45111
Home Visit
12/20/2007
Someone Else
345 Anywhere St.
There, OH 45211
Hospital Visit
View 9 Replies
ADVERTISEMENT
Sep 17, 2007
I m trying to write a macro which could take the text from a single column row T2 to row T313 and write it to a .txt file. Have the .txt file name created by the text in T4 or I could also put the text to name the file in T1 if you think it would be easier.
Then carry on to the next named sheet and produce another .txt file in exactly the same way until all 15 sheets have been completed. It would also be helpful if prior to starting to write each text files, it could test for any text in cell A2 of the sheet. The first empty A2 cell of a sheet would determine the end of the run, if it was prior to sheet 15 being reached.
View 2 Replies
View Related
Mar 27, 2008
I have 100 excel files in a folder need all these files to be saved in txt format in another folder need vba code to do this
View 2 Replies
View Related
Jun 26, 2008
I have two columns one of which has filenames and the other having values. I need to creating a macro that takes each value from a cell outputs it into a text file and then saves it with the filename of the cell next to the value. I'll need it to go down the columns and create separate text files for each.
View 7 Replies
View Related
Sep 26, 2007
I have about 100 Excel files in one folder that need to be saved as text files. They can keep the same name, but simply need to be converted to text files. I'd like to use VBA for this and I can't find examples that do exactly that...or ones that my limited knowledge can handle.
Excel files exist in C:Source and ALL of them should be saved as text files in C:Destination. Maybe there is an easier way, but I thought for sure there was a routine I could use.
View 4 Replies
View Related
Oct 24, 2007
I will have about 20 excel spreadsheets that will need to be run through some data cleansing and validation than each one exported to a csv file (without the column headings on them), and saved as the same file name as the spreadsheet was. If there are errors in the validation process then the one that fails (row) will be copied to an error log spreadsheet. There will be multiple worksheets in the error log workbook (one for each of the spreadsheets – which I hope VBA can create). What I am doing so far is creating a loop that will run on all of the spreadsheets located within a folder.
'Procucedure that will run all validation processes and error checking on extracteds spreadsheets
Sub RunCodeOnAllXLSFiles()
Dim i As Integer
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch..............................
View 3 Replies
View Related
Nov 14, 2013
I want to get a vba which will convert an excel with different tabs to individual text files. IT MUST BE PIPE DELIMITED.
So if there is an .xls file with 5 different tabs, i should get 5 text files with each text file getting name of the worksheet it was created from.
I have a similar code but somehow it is doing the conversion only for last worksheet, also it is saving the file in the same name as workbook.
Code:
Sub save_as_text()
Dim i As Long, txt As String, delim As String
delim = "|"
With ActiveSheet.UsedRange
For i = 1 To .Rows.Count
txt = txt & vbCrLf & _
Join(Evaluate("transpose(transpose(" & .Rows(i).Address & "))"), delim)
Next
End With
Open Replace(ThisWorkbook.FullName, ".xls", ".txt") For Output As #1
Print #1, Mid$(txt, 2)
Close #1
End Sub
View 2 Replies
View Related
Nov 20, 2007
I am using the following code to import a number of text documents into the same workbook, on seperate sheets and then to save the workbook as an excel file. the problem is that when the file tries to save (red section) I get a message telling me that Excel can not save the workbook in the requested format, I think because it is still trying to save them as text files rather than as an excel workbook. When I try to save manually, selecting .xls as the format it works fine, but I would really like this to be part of the macro to ensure the WB is saved.
Sub ImportFiles()
Dim Sfile As String
Dim count As Integer
Dim ans As String
Dim A As Integer
Dim FileSaveName As String
count = 0
Application.DisplayAlerts = False
Do
' Allow user to select the file to open, text files only
Sfile = Application. GetOpenFilename("Text Files(*.txt), *.txt")
' Check that a file has been selected
If Sfile <> "False" Then......................
View 4 Replies
View Related
Apr 21, 2009
I have the code below. It openes all csv files within a folder, then delete rows depending on the value of a cell. Now it needs to save the file as a xls file ....
View 9 Replies
View Related
Mar 26, 2014
Any way to create individual excel files for over 300 people in one shot.
I have created an excel template and have a list of 300 people. Rather than one at a time, is there a way to do it in one shot?
View 2 Replies
View Related
Jan 4, 2014
how I can loop through folders to select files starting with a certain word and copy all of them to a different folder and rename them. The folder structure is given below
Company 1(parent folder)
North South East(sub folder) West(sub folder)
Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec
In the above structure, the files are present inside each folders Jan, feb...Dec under the regions North, South East n west. note that I have to select files starting with "Sales" and copy them into a new folder(say results) and rename copied files as Sales1.xls, Sales2.xls etc. (Files are not present in the folder company1, north, south, east and east.)
View 1 Replies
View Related
Mar 3, 2014
I have several hundred text files which I would like to reformat and save as excel without needing to open each file individually.
I'm entirely new to working with macros, so, I was able to use macro recorder to save the steps to reformat the file, but would like setting up the part of the macro to automatically open and reformat all of the files.
View 2 Replies
View Related
Jun 12, 2007
I'm trying to print out multiple excel sheets in which it asks me if I want to save the changes or not every time. I have macro settings set to low so I always accept the macros, if I don't have them set to low I'm always asked the question of whether or not I want to run the macro for over 20+ files. Anyone ever had similar problems when printing multiple files?
View 9 Replies
View Related
Dec 7, 2012
When selecting multiple excel files in explorer, you can right click and choose to print the selected documents. All documents gets opened and printed but the files stay open and you have to manually click on YES or NO to save the changes.
Is there a way not to see this window appear. So documents get opened and printed and closes itself without asking anything. Maybe it can be done with an option in the preferences. I'm not sure.
By the way the documents where created with excel vba just in case it's relevant. Also the version of Excel is an older version, I think it was Excel XP or 2002/2003.
View 1 Replies
View Related
Sep 15, 2007
I have 40 files in one folder which I named it as "CA" + month's name that I am working on. I need to do analyse these files monthly and save it under new folder. how do I automatically save them in new folder and name them for that particular month. Also, each file has worksheet which has one cell as "Aug-07" and the cell next to it has number of that month that is "08". How do I automatically change this also based on the name of the file, because file name month and month in the cell are the same.
View 9 Replies
View Related
Jul 17, 2014
Below code Works for TAB delimeter but if there is ' ,' in a row its not reading correct data.Basically I am trying to read multiple .txt files to .csv .
Sub txt2csv()
Dim Fname As String, ipath As String, retstring, fs, a, i As Long
With Application.FileDialog(msoFileDialogFolderPicker)
[Code]....
View 2 Replies
View Related
Mar 9, 2007
the VBA code to allow a user to navigate to any of our network directories and upon selecting (using workbook getopenfilename hopefully) the proper folder on their directory open each txt file (delimited with a pipe) and then save the active file as a xls file and then close it and move on to the next file. I am pretty sure this will take a do while statement but I am not sure how to write it.
View 9 Replies
View Related
Apr 16, 2008
This is a great bit of code (I found), to import multiple text files.
I have one small issue -
currently it imports with each file going to a new column, like this: text file1 A1:A4, txt file2 B1:B4, txt file3 C1:C4 etc etc
And eventually i risk running out of columns because I'm working with a lot of text files.
Can someone tell me what to do to modify this code so it imports like this? :
text file1 A1:D1, txt file2 A2:D2, txt file3 A3:D3 ETC ETC
.e.g. first file imports across row1, second file across row2 etc
Sub test2()
Dim myDir As String, fn As String, ff As Integer, txt As String
Dim delim As String, n As Long, b(), flg As Boolean, x, t As Integer
myDir = "\BP1MELIS001SHARED_DATAEVERYONESolutions IntranetPriceMasterlogs" '
View 9 Replies
View Related
Aug 17, 2008
I have about 50 - 60 text files and I need to find certain values, namely Name, Account No, total amount under Portfolio Value in the text file and copy these values to a worksheet under column: Name, Account and Portfolio Value respectively. All new entries are paste one row below the existing data.
Some of the text files may not have any data in it or may not have the Portfolio Value as the monthly transactions may occupied 2 or 3 text files. Some text files may have 2 Name in it and there will be 2 Portfolio Values in it which I will need both to be copy to the worksheet.
I have attached both the Excel file and the dummy txt file.
View 3 Replies
View Related
Jul 29, 2006
I have patent numbers in column A of an excel sheet and would want to locate or search the specific text files (located in my D:Files folder) containing those values. If the value is found in myfile1.txt then the result should be outputted in column B containing the filename of the text file. For example:
Column A Column B
us20061234556b1 myfile1.txt
us20061434455a2 myfile2.txt
wo200612344556A myfile3.txt
View 5 Replies
View Related
Nov 18, 2006
In a folder I have several text files (each text file is a customer statement)
I get the files from the computer dept named randomly, I need to rename each
File to its customer ID number, each ID consists of 15 characters (including the dash characters) and is found on the 3rd row of the file (3rd row , skip one character And count 15 characters ex : 0010-902514-422)
I found a code that renames the text files incrementally (1,2,3…..). I need to modify the code so that instead of renaming the files that way I rename them by their ID number (get the ID of each file while looping then rename It by that ID)
One more thing, can I get the ID then skip 44 characters and attach the following 14 characters to the ID (ex : 0010-902514-422- Lebanese Pound). ttached is a folder containing an excel file with the code and 2 statements
Sub RenFile()
Dim arrFiles As Variant
Dim intCounter As Integer
Dim datFile As Date
Dim strFile As String, strPath As String
strPath = ActiveWorkbook.Path
arrFiles = FileArray(strPath, "*.txt")
For intCounter = 1 To UBound(arrFiles)
strFile = arrFiles(intCounter)
Name strPath & strFile As strPath & intCounter & ".txt"
Next intCounter
End Sub
Private Function FileArray(strPath As String, strPattern As String)
Dim arrDatabase()
Dim intCounter As Integer.............................
View 3 Replies
View Related
Dec 11, 2007
I have about 200 text files each with 2 columns. I want to create a single excel spread sheet where the data comprises of the second column from each text file. I do not know any thing about macros and so need help on writing a macro that will automatically import data from the whole of the second column of each text file into one single spread sheet.
View 7 Replies
View Related
Dec 22, 2011
I have about 10k poorly formatted txt files that I need to grab 4 items from each and put in a spreadsheet. How can this be done in Excel or should it be done in Access instead?
Here's a link to what each txt file looks like: MTRP88PF700721.txt
I only need the number next to Posting Journal on line 3 (12686 in this case), the 3 digit number next to Class Total on line 11 (101 in this case), the Extended Cost Final Total and the Extended Retail Final Total (23.77 and 39.30 in this case)
because one of my staff members is currently opening each txt file and typing these figures into a spreadsheet!
View 7 Replies
View Related
Feb 26, 2012
Need to import multiple text files in one shot. (Excel only allows 1 at a time)
Most file names are similar just numbered. ex. JoeBlowfile 1.txt, JoeBlowfile 2.txt, JoeBlowfile 3.txt, etc......
All text files have 30 lines of text
For example: JoeBlowfile 1.txt will start at A1 and end at A30, then JoeBlowfile 2.txt starts at A31 and ends at A60 and so on.....
May need to import 1 to 10000 files at a time.
all in 1 row single line starting at A1
once all files are imported need to export to 1 single text file file saved in XXXX folder with XXXX.txt name.
View 6 Replies
View Related
Nov 22, 2006
I have about 1200 text files with data regarding different machines.These file contain a line called 'Validation date" and also the programe number on different line.
I need a macro which will extract this date for each program number and write in excel in two columns like program number and validation date.
I have tried with some of the macro help available on this site,but I have to do this one at a time.The time required doing this way is same as going in each text file and copy/pasting in excel.Is it possible to automate this process.
View 9 Replies
View Related
Feb 29, 2008
rearrange this macro for me that I could import multiple txt (200 files) files from selected folder. Could You insert appropriate comments in Your altered macro
- where I should change how many columns I need to import from files,
- which column/columns I want to import from files
- macro should automatically import data from the whole of the selected column or columns of each text file into one single spread sheet and import it to different columns
I have found this:
Sub test()
Dim myDir As String, fn As String, ff As Integer, txt As String
Dim delim As String, n As Long, b(), flg As Boolean, x, t As Integer
myDir = "c: est" '
View 9 Replies
View Related
Dec 15, 2009
i am looking for a macro that would import chosen multiple text files and append them all into one worksheet into column B (one textfile row into one cell), with column A displaying the imported filename next to every entry.
View 5 Replies
View Related
Jan 23, 2010
I found the code below on the internet and adjusted it to my needs.It is working perfectly fine except for the fact that it opens a new workbook to import the data. I run this code from a workbook named "InstronImport.xlsm" and would like it to add the data in this workbook instead of a new one. I have been trying for a day now and can't seem to figure out how to do it.
Sub ImportRawFilesInstron()
Dim FilesToOpen
Dim x As Integer
Dim wkbAll As Workbook
Dim wkbTemp As Workbook
Dim sDelimiter As String
On Error Goto ErrHandler
Application. ScreenUpdating = False
sDelimiter = ","
FilesToOpen = Application. GetOpenFilename _
(FileFilter:="Text Files (*.raw), *.raw", _
MultiSelect:=True, Title:="Text Files to Open")...................
View 4 Replies
View Related
Jul 29, 2006
I have 10 rows and 3 columns or words(data). What I am trying to do is export this data one row at a time so that I end up with 10 text files. Each row needs to be inserted into 3 variables within my text file. (Variable1,Variable2,Variable3) and then saved. Each saved text file needs to be named Variable1-Variable2-Variable3.txt. End result should have 10 text files that are named corrosponding to each row of data and each text file should also have the 3 variables replaced with the corrosponding row data.
Right now I have to manually rename the text file (Variable1-Variable2-Variable3.txt) and then manually open the text file and select EDIT-REPLACE and insert the data 3 times. I have to do this for many many text files and it is becoming monotinous.
View 9 Replies
View Related
Apr 26, 2007
I am using excel 2003. I have more than 500 text file which are result of some numerical analysis. I have another bunches of the same file number. I can record and play around with macro.
What I want to do is
-copy selected cells from imported text file in excel and paste in new or in first opened excel file. I have recorded macro for one file including importing from text to excell, copy and paste the selected file (look the macro below). But I have more than 500 files and I want to do the macro the same thing for each file in one excell file. Do i have to make one macro for each file??, that takes much more time than manual import and copy paste. The cell position and range to copy is the same, but have to be pasted in new row (in one excel summery file). The file name of each text file is different and all are in the same folder.
Sub text_to_excel()
Workbooks.OpenText Filename:= _
"I:ResearchVALERI_germinationvaleri_slopevaleri_slope_COREL_DHPoutputDSCN2589.txt" _
, Origin:=xlMSDOS, StartRow:=1, DataType:=xlDelimited, TextQualifier:= _
xlDoubleQuote, ConsecutiveDelimiter:=True, Tab:=True, Semicolon:=False, _ ..................
View 9 Replies
View Related
