Convert Numbers To Times
Jul 17, 2007
I have a workbook that has many linked cells and formulas. Some of the times were entered manually in hh:mm format and are located on tables that are used to get a number from. On another worksheet, there are times taken from the internet that show up in general format. So 00:05 shows up as 5. I have tried to change these into number formats but it always shows up as 00:00 and tries to include the date in the formula bar.
These various cells are linked and are used to look up other values but the formats are different and not talking. I am looking for a way to get them to work with eachother without using formulas if possible because many of the cells already have formulas in them.
View 6 Replies
ADVERTISEMENT
Jul 16, 2007
Is there any way changing general four digit number into hours and minutes?
I have almost 31000 rows of imported data, showing arrival and departure times with four digits (dep 2130, arr 0130) without colons and I need to subtract dep from arr to get block hours. Is there a way to add colon to multiple cells or some other solution to my problem?
Adding colon to 62000 cells one by one does not sound that good to me.
View 7 Replies
View Related
Aug 11, 2014
I have a column in my data set that consists of dates and times in this format: 2014/08/02 01:46:49 PM. I am trying to convert these dates and times to numbers so that I can actually use these values for calculations and regression analysis. When I click on one of the cells, I get a number that is revealed along with decimals. For example, the cell with 2014/08/02 01:46:49 PM had a stored value of 41853.574. I tried to highlight the entire column of dates + times and click on the format cells button. I selected the number category under number but that did not work. I also tried to use the =DateValue(Cell #) function but that did not allow for distinguishing between the same date but different times.
What are my options for converting these dates and times to numbers that I can work with? Is there a way to get the entire column of dates + times to show each cell's numeric stored value?
View 4 Replies
View Related
Mar 7, 2009
I need a formula in excel to convert start times and end times and minus out lunch time taken and then give total hours worked. For instance,
Column D Column E Column F Column G
Start End Lunch Total Hours Worked
10:01AM 7:08PM 1:01 (formula to convert hours worked)
View 9 Replies
View Related
Sep 26, 2013
i have a s/sheet with thousands of times in a column (eg col1 below in 24 hour format) and would like these in an adjacent column in hourly intervals (eg in Col2 below
e.g.
Col1 ColB
00:23 0 - 1
02:54 2 - 3
09:07 9 - 10
15:24 15 - 16
Is there a formula I can run to enable?
View 2 Replies
View Related
Jun 8, 2007
I've searched and found almost what i'm after but not quite i have a list of times in word in a column they are in the following textformat 12 23 00 23 14 34
i can paste them into excel but cant work out how to change them to excel time eg 12:23 00:23 14:34
View 8 Replies
View Related
Sep 12, 2007
We have a report application and developers that are giving us a real challenge.
1) if you have a cell formatted with:
DD:HH:MM and have a 4 digit numeric value for each section:
47.00:0.00:59.00
you can use the following formula to convert to hours minutes that excel can handle:
=(LEFT(P18,4))+MID(P18, FIND(":",P18)+1,4)/24+MID(P18, FIND(":",P18,7)+1,4)/1440
2) if you have a cell formatted with:
DD:HH:MM and have a 2 digit numeric value for each section:
47:00:59
you can use the following formula to convert to hours minutes that excel can handle:
=(LEFT(P4,2))+MID(P4, FIND(":",P4)+1,2)/24+MID(P4, FIND(":",P4,5)+1,2)/1440
Problem:
our developers have created a new report that now has a variable format
D:H:M
2:6:33
4:3:3
0:22:5
0:2:2
22:0:1..................
View 8 Replies
View Related
Oct 22, 2009
In the ID column of the attached excel file whenever I convert the numbers stored as text to numbers it results in a weird transformation.
e.g. an ID of 480610141001 becomes 4.8061E+11. When I do the same process in the name column, which has similar numbers, it will give the correct result following the same process.
View 2 Replies
View Related
May 23, 2014
I have been looking through the forums and found the below code, but I have both text and numbers in the same range. I have attached an example of what I need to have converted.
Book1.xlsx
View 3 Replies
View Related
Jan 16, 2008
See attached file. A colleague is downloading rows of data from a website which contains a number field Excel is currently treating as Text after being pasted in. My spreadsheet includes just a sample of the many rows of data however as you can see the VALUE function refuses to convert these text values to numbers. How these might be converted and why the VALUE function refuses to work in this case?
View 5 Replies
View Related
Aug 26, 2006
The back story is that from a system we use, when you download data from inside it, Excel treats most of the cells with a "Number Stored As Text" error. I had problems with this and it was just generally annoying so I wrote the below macro that converts each of the cells back to general cells and reinputs the data, essentially reseting the cell and keeping the data. Being that this is a loop, it takes a good while to run if alot of data was downloaded. Any idea's on how to speed it up besides screen updating? Note, other stuff happens in the first macro, but it is just cosmetic non-intensive things. It calls the second macro because I wanted them seperate should I want to just run the second.
Sub CleanData()
Application. ScreenUpdating = False
' Find the Right most cell and the Bottom most cell and
' run the macro from A1 to this cell recursively
Range("IV1").End(xlToLeft).Select
Col = Selection.Column
Range("A65536").End(xlUp).Select
Row = Selection.Row
Range("A2").Select
Range("A1", Cells(Row, Col)).Select
Application.Run ("FixTextAsNumberError")
Application.ScreenUpdating = True
'
End Sub..............
View 5 Replies
View Related
Sep 29, 2007
I have the following two macros that I use daily:
Public Sub add_tick_marks()
Dim c As Range
For Each c In Selection
If Not IsError(c.Value) Then
If Left(c.Value, 1) <> "'" And c.Value <> "" Then
If InStr(c.Value, "E+") > 0 Then
c.Value = "'" & c.Formula
Else
I use these because I frequently copy billing account numbers that have leading zeros from some proprietary software and work with them in Excel. I need the leading zeros to facilitate VLookUp's. When I paste the data into Excel it truncates the leading zeros. My typical procedure is:
1. Copy a column of values from our proprietary software
2. Paste it in Excel (Ctrl+V)
3. While newly pasted data is still selected I hit Ctrl+1 which brings up the Format Cells form.
4. I double click "Text"
5. I re-paste into Excel (Ctrl+V)
6. I run my macro to add tic marks to the values so the leading zeros never get lost.
The problem occurs when I copy multiple columns of data and paste it in Excel. If one of the columns of data contains numbers or currency then I select that range of values and run the macro to get rid of the tic marks. After running the macro the numbers are still treated as text. When I select a range of those values and right-click on the status bar and select " Sum" there is no value. No big deal, I just highlight them and format the cells as numbers or currency. But after formatting them as numbers or currency, they retain their format as text until I click in the formula bar for each individual cell and hit enter, at which time they take on the number or currency format I have chosen and the sum can then be displayed in the status bar.
How can I force the formatting I chose to take effect on the data immediately without me having to individually "fake change" the data in each cell?
View 3 Replies
View Related
Nov 21, 2007
I have text as numbers downloaded to excel sheets from crystal that i need to add together on a summary sheet. I've tried using Value, TRIM and CLEAN functions to no avail. the TYPE function is reading the cell as Text and I have also tried multiplying by 1. Does anybody know how I can get around this ? hopefully I've attached an extract of the file
View 4 Replies
View Related
Dec 21, 2012
I am trying to set up excel sheets for documents that we print often. I would like to print them with page numbers in right footer that increases sequentially.
setting up a macro. But very time I print it starts from same number instead of the number after where I left off. Example: if I print today with page numbers 1 through 12, next time I want it to print number 13 through whatever no of copies printed.
Here is the code I copied from one of the threads here:
[Code] .....
I need the page number in right footer and also the macro to save the last number printed.
View 3 Replies
View Related
Sep 16, 2009
I have a workbook full of six digit numbers that I need to manipulate but can't. They have been data-dumped from a server and copied as non-numeric values.
I have tried EVERYTHING I could find on how to convert these column cells to numeric fields:
Multiplying by 1 - didn't work
VBA Code - For Each xCell In Range("a1:a1012")
xCell.Value = xCell.Value
Next xCell -didn't work
Format Cells as numbers - didn't work
Format Cells as general - didn't work
Remove Spaces - didn't work
Text to Columns - didn't work
This is how the data is stored.
000216 000703 000744 000819 002184 002529 002571 002573 002783 003222 003645 003826 004034
View 9 Replies
View Related
May 11, 2006
I need to create a formula to convert the number into millions. I want to do this in the format cell >> Custom in the excel sheet.
Suppose the number is 2000000 the it should show as 2.
View 6 Replies
View Related
Feb 9, 2014
How do I enter a formula in excel 2010 that will give the total amount of times each number is in this group. Example : how many times (total) the number 12 showed up , how many times the number 27 showed, and so on for each number that is in the entire group of numbers, from 1 to 80 .
Here is the page I will copy and paste into a workbook sheet from the internet that i want to evaluate the times each number was called.
Very new to all this , I am a bit aged and need not to learn excel A to Z, just need to know what correct statements /formulas have to be entered to do what i desire.
I am only interested in the total count of the small bold numbers 1 to 80, each single digit 1 to 9 and double digits 10 to 80 will be in their separate cells. The large bold three digit numbers and dates/times will have to be erased (manually) before the calculation takes place.
298
2/9/2014 12:28:02 PM
37
77
[Code]....
View 6 Replies
View Related
Apr 5, 2007
i want to convert numbers to letters in the excel Sheet
I.E: when the number is 1000.00$ it write in another cell
on thousand dollar only
1500.00$ one thousand five hundred dollar only
View 13 Replies
View Related
Aug 31, 2009
For my research in medicine I build a spreadsheet with google docs. After having received most of the data I transfered the spreadsheet into an excel file. The next thing I would like to do is to convert the words in the spreadsheet into numbers so I can calculate with them. For example: every row in column E consist of one of the two words: 'man' or 'woman'. I would like to convert the word 'man' into a '0' and the word 'woman' into a '1'. Is it possible to write a formula or function for this?
View 9 Replies
View Related
Jun 18, 2014
I have a sheet that shows me in column I, J , K whole numbers eg. 25 , 50 , 25
I would like to format this to percentages eg. 25%, 50%, 25%
The number of rows can grow as well.
View 6 Replies
View Related
Jun 19, 2014
For database work,I need to convert cell value of page1 into numbers as in page3. conversion values datas are in page2.What I need is in page3.here is sample: convert.xlsx
View 3 Replies
View Related
Feb 2, 2010
this may be simple but I need to convent say
A1 = 09
B1 = 23
into
C1 = 0
D1 = 9
E1 = 2
F1 = 3
..etc
View 11 Replies
View Related
Nov 19, 2013
If I have a long series of text numbers is there a way to convert it from text to numerical values
4
Three
5
Three
5
Four
[Code] ......
View 9 Replies
View Related
Jun 12, 2007
Working with an inherited spreadsheet which has massive amounts of numbers formatted $US to 2 decimals. Can't manipulate the data: all formulas to sum groups of the numbers yield zero and formulas to multiply or divide them yield "#VALUE" error message. I guess the data is text (is left justified) although there's no apostrophe visible in the formula bar. Anybody know how I can convert these to numbers?
View 9 Replies
View Related
Jul 16, 2008
converting numbers to text:
In cell F39 i have a number (for example) 4322.08
and i would like to convert into into text in the following way
In cell B47 I would like it to say Four
In cell C47 I would like it to say Three
In cell E47 I would like it to say Two
In cell G47 I would like it to say Two
In cell I47 I would like it to say Two
in cell J47 I would like it to say Eight
But essentially any number that I type into cell F39, I would like it to convert the number to text
View 9 Replies
View Related
Feb 15, 2007
How do I give letters a value in Excel? i.e. How can I make A = 1
View 9 Replies
View Related
Jan 17, 2008
how to convert figure into words eg 1250 (one thousand two hundred fifty only)
View 2 Replies
View Related
Jan 23, 2008
In an excel column listing monthly payments, I cannot report a negative value . I need to "carry forward" the negative value by automatically adding it to the next positive cell in the column. This process should loop through the column leaving no negative numbers, leaving a zero in any cell where the negative number was originally and balance out to be the same amount as the sum of the original listing of monthly payments.
View 4 Replies
View Related
Mar 30, 2014
I'm trying to set up a stocktake sheet for one of the business' I work for. We use a letter = number cost pricing code on our products. ie: H=1, A=2, R=3, D=4, T=5, O=6, G=7, U=8, E=9, S=0. I would like to have 4 columns where A contains the qty, B the alphabetical cost code, C the deciphered numeric per each amount and C being the total price (ie column A x C).
View 11 Replies
View Related
May 7, 2014
One of our interns collected some data for me but they entered the dates "2 14 2014". I need to convert these into a usable date format in hurry.
View 3 Replies
View Related
