i have a s/sheet with thousands of times in a column (eg col1 below in 24 hour format) and would like these in an adjacent column in hourly intervals (eg in Col2 below
e.g.
Col1 ColB
00:23 0 - 1
02:54 2 - 3
09:07 9 - 10
15:24 15 - 16
Is there a formula I can run to enable?
I have a string of data containing hourly timestamps with a value attached to each timestamp.
I need the timestamps to be every 15th minutes instead of hourly. So basically, I need the hourly value to be continued four times for each timestamp.
See the attachecd workbook. It should be quite simple, but for some reason I just cant figure it out!? A bit embarressed In the woorkbook, I need VGTs and VPTs to be in a 15 minutes granularity.
ERROR: Cannot upload workbook - uploader not showing so here are shot of the raw data:
VGTs
VPTs
01/02/2013 00:00
[Code].....
I'm trying to determine how much time our agents are spending for their lunch/breaks during 30 minute intervals. Range A8:A200 lists the agent's names, Range B8:B200 lists their lunch/break start times, Range C8:C200 lists their lunch/break end times, and Column E lists the times (8:00, 8:30, 9:00, etc.). If an agent starts their break at 10:57 (Column B) and ends at 11:10 (Column C), the value next to 10:30 (Column E) would have 0:03:00 and the value next to 11:00 would have 0:10:00. But would need to sum all the agents which took a break/lunch between 10:30-11:00, and 11:00-11:30.
View 2 Replies View RelatedI have been given the task of finding out who logs in at what time of the day.
I have attached the raw data that I have to work with.
In essence I need to see how many login's there were for 06.00 - 10.00 at 15 minute intervals e.g:
06:00 - 5 Logins
06:15 - 1 Logins
06:30 - 3 Logins
06:45 - 11 Logins
etc
Has anyone got any suggestions?
I have A:1 - X365 filled with hourly energy prices for 2013. I need to convert these to a single column - A1:A8760. I have tried writing some code and some macros with no success.
If I were to do it manually 365 times, the macro would look like this:
Copy Row A1:X1
select sheet 2
Paste Special > Transpose (fills A1:A24)
repeat for rows 2-365
Tried using this from a previous post, but it takes A1:A24 then B1:B24 and so on and makes them a single column - so it doesn't work unfortunately.
Sub MakeColumn()
Dim rng As Range
Dim LastRowSrc As Long
Dim LastRowDst As Long
Set rng = Worksheets("Sheet1").Range("A1")
[Code] .....
Code copies the first two columns of a many column table and pastes them at a certain interval (14 columns) to make transfer to a report easy. The problem is that the worksheets each have a different number of columns, but none more than 56 columns. The macro works wonders on the first sheet, but thereafter does not work at all. The first sheet has 27 columns, the second sheet only has 4 columns and the one after has 38 or something.
Option Explicit
Public iMaleGroup As Integer
Public iFemaleGroup As Integer
Public iMaleAnimal As Integer
Public iFemaleAnimal As Integer
Public iMaleGroup1 As Integer
Public iFemaleGroup1 As Integer
Public StudyTitle As String
Public SmallAnimal As Boolean
Sub CommandModule()
Dim Wrkst As Worksheet
Dim wsName As String
Dim wsSubject As String
Dim wsNumber As String
Dim rSummaryHeader As Range
Dim MergedHeader
Dim NextMergedHeader
Dim HeaderRange
Dim AddHeader
Dim TableHeader
Dim SumTableHeader
Dim PasteRange
Dim x As Integer
Dim n As Integer
Dim z As Integer
Dim i As Integer
Application.Calculation = xlCalculationManual
Application. ScreenUpdating = False ............................
I will say exactly what i want.
I want to keep statistics of roulette.
More specifically, i want to count how many times a dozen lates to come.
The range from 1-12 is 1st dozen, from 13-24 is the 2nd and 25-36 is the 3rd.
I want to count among these numbers, how many times one of three dozens appear every 1 time, how many times appears every 2 times, .... until 20 times.
For example: I have put in a column 500 numbers from 0 to 36.
The output must be like this:
1st Dozen: Every 1 time: x
Every 2 times: n
Every 20 times: m
The same for 2nd and 3rd dozen.
I need a formula in excel to convert start times and end times and minus out lunch time taken and then give total hours worked. For instance,
Column D Column E Column F Column G
Start End Lunch Total Hours Worked
10:01AM 7:08PM 1:01 (formula to convert hours worked)
I have a workbook that has many linked cells and formulas. Some of the times were entered manually in hh:mm format and are located on tables that are used to get a number from. On another worksheet, there are times taken from the internet that show up in general format. So 00:05 shows up as 5. I have tried to change these into number formats but it always shows up as 00:00 and tries to include the date in the formula bar.
These various cells are linked and are used to look up other values but the formats are different and not talking. I am looking for a way to get them to work with eachother without using formulas if possible because many of the cells already have formulas in them.
I've searched and found almost what i'm after but not quite i have a list of times in word in a column they are in the following textformat 12 23 00 23 14 34
i can paste them into excel but cant work out how to change them to excel time eg 12:23 00:23 14:34
Is there any way changing general four digit number into hours and minutes?
I have almost 31000 rows of imported data, showing arrival and departure times with four digits (dep 2130, arr 0130) without colons and I need to subtract dep from arr to get block hours. Is there a way to add colon to multiple cells or some other solution to my problem?
Adding colon to 62000 cells one by one does not sound that good to me.
We have a report application and developers that are giving us a real challenge.
1) if you have a cell formatted with:
DD:HH:MM and have a 4 digit numeric value for each section:
47.00:0.00:59.00
you can use the following formula to convert to hours minutes that excel can handle:
=(LEFT(P18,4))+MID(P18, FIND(":",P18)+1,4)/24+MID(P18, FIND(":",P18,7)+1,4)/1440
2) if you have a cell formatted with:
DD:HH:MM and have a 2 digit numeric value for each section:
47:00:59
you can use the following formula to convert to hours minutes that excel can handle:
=(LEFT(P4,2))+MID(P4, FIND(":",P4)+1,2)/24+MID(P4, FIND(":",P4,5)+1,2)/1440
Problem:
our developers have created a new report that now has a variable format
D:H:M
2:6:33
4:3:3
0:22:5
0:2:2
22:0:1..................
I have a column in my data set that consists of dates and times in this format: 2014/08/02 01:46:49 PM. I am trying to convert these dates and times to numbers so that I can actually use these values for calculations and regression analysis. When I click on one of the cells, I get a number that is revealed along with decimals. For example, the cell with 2014/08/02 01:46:49 PM had a stored value of 41853.574. I tried to highlight the entire column of dates + times and click on the format cells button. I selected the number category under number but that did not work. I also tried to use the =DateValue(Cell #) function but that did not allow for distinguishing between the same date but different times.
What are my options for converting these dates and times to numbers that I can work with? Is there a way to get the entire column of dates + times to show each cell's numeric stored value?
I have a dataset in one column. Here 4 cells should be turned into 1 in a new column using a middelvalue.
How do i get excel to do this, so it uses 4 new cells from the first row to every new cell in the new column?
I have been using the attached formula to calculate total volume (customers seen) by hour (between 1 and 2, 2 and 3 and so on...). But how can I change this formula to take a census at a certain period of time (let's do it on the hour to be easy) instead of double-counting those who were there, but left in the same hour and those who just entered in the same hour. I hope this makes sense...a true census really should not count two people twice though which I think is happening here...
I hate to create a sense of urgency, but would love to begin working on this later tonight. Please let me know if you need more detail.
I have an excel work sheet with 2 columns and hundreds of rows. The first column is time in minutes over a number a years and the second is a list of corresponding data readings (numbers). I want to only select on the hour data from the list however I cannot seem to do it. The times vary in the sense that they are not all just 1 minute apart, some are every minute, then there might be a 10 minute gap in data, a few more minutes, then another gap etc.. All I want to be able to do is to select all the on the hour data from the list and its corresponding data value.
View 6 Replies View RelatedI am trying to create a conditional formula. I have multiple workers that work for different $$ per hour. I am keeping the hourly rates on one page for security purposes (the person that is going to be updating the hours worked is not very computer savy and they less they have to type the better) and the hours on another... I want copy a formula down the page that will calculate the hours to the hourly rate. The issue is that i want the formula to look at all of the hourly rates (assume they get raises) for Joe and multiply the most recent hourly rate times the hours... in addition I don't want the formula to re-calculate when a new hourly rate is put into the hours sheet.
Example
Jan. 1 joe works 8hours at $10 per hour formula in A1 (or wherever) calculates $80
Jan. 2 joe gets $1 raise
Jan. 2 Joe works 8 hours at $11 per hour formual in A2 calculates $88 but formula in A1 maintains the $80 and does not calculate the $1 raise.
I have a list of days and hours, and data for whether a type of event either did or did not occur for each sampled hour. I need to return a new value, some sort of "Event Day" value, which will essentially tell me if an event occurred at least once for each day.
Attached is a sheet with 4 days' worth of data. Jan 1st and 3rd 2006 are my two "Event Days".
To complicate things, I can't be sure I have 24 hour readings for each day, so I can't assume each day is a data range (e.g. A1:A24). Hours might be missing. (As such, I am trying to organise along the lines of IF the preceding cell is the same date...)
I also have lots of data stored as months, so would love a formula I could just autofill down. All it needs to do is effectively flag up for me when a day has experienced one event.
I am trying to build a costings sheet for shift work. The first problem I am experiencing is getting excel to split up a shift into the different bands.
For example the shift needs to be calculated on different rate bands, from 00:00 to 08:00, 08:00 to 19:00 and then 19:00 to 00:00. There is a different hourly rate for each band. Therefore if I enter a start time and end time, I need excel to calculate the total charge over the different rate bands.
For example a shift 07:00 - 21:00 would have:
1 hour 07:00 - 08:00 at Night rate
11 hours 08:00 to 19:00 at Day Rate
2 hours 19:00 to 21:00 at Night Rate
Once I have this worked out I have the added complication of different rates on Friday evening,s, Saturdays and Sundays etc. But at the moment one problem at a time !
I have a list of values at 'x' min intervals (the intervals sometime changes). I want to sum each hour's values eg. between 0:0:0 hour and 0:59:59, I want to add values 1040+800+860+870. Then I want to proceed and add all values for the next hour i.e. between 1:0:0 and 1:59:59, and so on. I have about 65000 of these calculations to do, so the need for some vba programming.
Hour value
0:14:531040
0:29:53800
0:44:53860
0:59:53870
1:14:53850
1:29:53860
1:44:53710
1:59:53670
2:14:53610............
I have a large sheet with the values of power from a counter in a 15 minute base.
A B
01.01.09 00:15 0,25
01.01.09 00:30 1,15
01.01.09 00:45 0,75
01.01.09 01:00 2,01
and son on until the end of the month
What I am trying to do is to create a macro which calculates the average per hour and put in another columns like this:
01.01.09 01:00 average from 00:15 until 01:00
01.01.09 02:00 average from 01:15 until 02:00
and so on until the end of the month.
1/1/20080:221/2/200814:051/1/20082:451/3/200819:301/1/20089:001/1/200819:33
In time Out time
I 've used the site many times in the past, but this is my first post.
Above is a small example of the data Im working with. I'm not wanting to plot all of this out by hand, so hopefully someone can help (there are around 30,000 samples). I'm looking to track by hour when a customer is actual here. The first row is one customer in @ 00:22 and out the next day at 14:05.
I would like to have dates of the year down column A and hours 0 through 23 across row 1. Then a number of customer here on 1/1/2008 by every hour of the day on to 1/2/2008 so on and so.
I have a macro that I want to run on an hourly basis, say at 9am, 10am, etc whenever the workbook is open. This needs to be definable as I have several users that will be conducting the same activity throughout the day. In other words I want the macro to run on the hour for user 1, quarter past the hour for user 2, half past for user 3 and quarter to for user 4. Each user does have their own unique macro to run so it should (hopefully) just mean introducing a line of code to each, defining the time to run.
View 4 Replies View RelatedI have large data sets with half hour values that I need to average into hourly values. Here is an example of the data:
28.12.2012
01:30:00
0,1
2,4
2,5
127,6
28.12.2012
02:00:00
0
0,9
0,9
118,5
[code]....
How can I get the median of a column that contains both hourly and annual rates? I would like to either multiply the hourly rate * 2080 or divide the annual rate by 2080 then get the median.
View 6 Replies View RelatedI have a worksheet containing one timestamp column and a single column of data, the interval being one minute. How can I aggregate it to get half-hourly totals?
View 4 Replies View RelatedI have got a lot of data to put in a chart that updates every 5 minutes with new data - i have a chart that Line chart that shows this.
It shows the cost of something every 5 minutes.
I have put this in a chart using offset but obviously i want to show the cost over the course of the day - because this updates every 5 minutes, the axis at the bottom (which has the time of the data) is massive and doesn't look good.
Is there a way to show the axis at an hourly interval but keep all the data in the chart?
I am trying to calculate earnings based upon hours worked based on 24 hours format (time out - time in = time worked) multiplied by hourly rate. I cannot get the proper calculation. How can I attach a copy of the Excel worksheet?
View 9 Replies View RelatedI'm having trouble with conditionals based on a primarily a 4 hour minimum. I am trying to set it up so that anything under 4 is shown as the minimum 4 hours + Travel Time - Lunch Time or if it is greater than 4, shown as Regular Hours + Travel Time (since travel cannot be overtime) - Lunch Time & Overtime (anything over 8 hours). Additionally, I was wondering if it would be possible to incorporate an additional IF formula based on the date. If the entered date is on a weekend, then all hours worked will need to be overtime rather than regular.
View 1 Replies View RelatedIn my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
