Converts Into Array My Formula
Jan 15, 2009
NSEEQABBNANANA461NSEEQABBNANANA461.95NSEEQABBNANANA463NSEEQABBNANANA465
here i have one scrip name ABB and there are 4 rates for the given thing i need thats if on a different sheet i write ABB i want to get the higest rate and the lowest rate in the next Colums as result so plz help me ,with the formule that i should be using for the required thing to get my out put.
Answer:-
Assuming that the data is in A2:G5...
Control+shift+enter, not just enter:
=MAX(IF($C$2:$C$5="AAA",$G$2:$G$5))
=MIN(IF($C$2:$C$5="AAA",$G$2:$G$5))
This was the answer which i got this converts into array my formulae but then i am facing a problem when i save my excel sheet then my answer to the solution is there but the formule doesnt appear when i reopen my excel sheet so i cannot make use of it again i have to again write the formule so i need a solution where once the formule is writen then is should not diappear when the file is saved and closed .
View 9 Replies
ADVERTISEMENT
Nov 30, 2009
I have a sub-routine I call on that takes a current recordset and converts it to an Array.
I would like to make this sub-routine tool more flexable by being able to specify THE NAMES for the recordset and an array involved.
For example
Sub My_Code()
....blal bla bla.... current code...
Call Recordset_To_Array( Recordset_name, Array_name )
....bla bla bla... continued
end sub
And the subroutine tool:
Sub Recordset_To_Array( Recordset_name as String, Array_name as string )
'Code that generates RS
'Need to take Recordset_name string value and use it in the line below at "XXXXX"
Dim XXXXX as Recordset
'Code that generates array
'Need to take Array_name string value and use it in the line below at "XXXXX"
Dim XXXXX as Variant
End Sub
View 9 Replies
View Related
Jul 2, 2009
Someone here wrote up this code for me which converts cells with formulas to a new formula (It adds a division to the formula in the cell). It works great with one problem. If the code is rerun multiple times it doesn't check if there is a division added already and just keeps adding and adding to existing formula. For the last our I tried to add a check to the code. Something along the lines "If cell already has "/H2" inserted" skip to next cell. But nothing is working.
Here is the code I'm working with:
Sub Macro2()
Dim MyRange As Range, NewFormaula As String, Delim As String
Dim Cell As Range
Dim MyString As String
Dim Format As Range
Dim ws As Worksheet
View 9 Replies
View Related
Sep 12, 2012
I have made macro that works but I want to convert it to array and want change all dates with looping. I have used based on selection and dates to convert are not always in Column E
Sheet1
E
1
Date
[Code]....
View 9 Replies
View Related
Feb 3, 2014
So I am starting to get ambitious with Excel now and am looking at creating a macro that will automatically create a pdf file of several worksheets at the same time. However this is my problem. Using the current version of Excel there is a wonderful record macro button, however when I try to include a function that would create a PDF, it says that I need to save any changes before creating the PDF. However when I save the file, I have to stop recording which defeats the whole purpose of creating the macro in the first place.
How can I use the record macro function to create my pdf macro without learning visual basic? If I cannot, how to write what it is that I am trying to accomplish?
View 1 Replies
View Related
Dec 3, 2007
is there a way to type a number into a cell and for it to alter the cell upon hitting enter?
for example...
typing -10
and it displaying -10 / 14 in the same cell
View 9 Replies
View Related
Jul 22, 2014
I extracted data going back to 1980 from Bloomberg and realized that BB uses abbreviations rather than pure numerical values. For example, 3,000,000 is "3M," 300,000,000 is "300M," etc. I need a macro that converts "M" into the actual value, "B" into the actual numerical value, etc. For example, a macro that converts "3M" into 3,000,000. I know that I can identify the values in VBA with "###M."
View 7 Replies
View Related
Apr 7, 2009
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
View 6 Replies
View Related
Nov 6, 2013
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
View 5 Replies
View Related
May 18, 2007
I just wanted to concatenate a few cells using an array formula like this:
{=SUM(IF(B2:J2="";0;B2:J2))}
Well, this does not work. I have no idea why it fails. Any solution to this without scripting?
View 9 Replies
View Related
Jun 30, 2006
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
View 4 Replies
View Related
Aug 25, 2006
I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
View 5 Replies
View Related
Jun 7, 2006
I'm trying to have a macro write down an array formula, but when I hit ctrl+shift+enter, the recorder says it can't record. If I write in the macro ...FormulaR1C1 = {=...} then I get the formula as a text. Is there a way to tell the macro that a formula should be entered as an array formula?
View 2 Replies
View Related
Mar 6, 2007
I want to use an array formula to sum about 5 rows each of which has 5 columns, e.g.
1 2 3 4 5 15
2 3 4 5 9 23
5 4 3 2 5 19
9 8 7 6 5 35
7 6 4 2 1 20
The final column is the total for each row. Instead of using =sum(a1:a5) then dragging the formula down thus creating a new formula for each line, I want to use a single array formula to achieve the same result. I have tried =sum($a$1:$a$5:$e$1:$e$5), even though all my instincts said it did not look right. And I was right!
I'm sure it is easy, but I just cannot work out the syntax.
View 11 Replies
View Related
Aug 2, 2007
I have an formula for calculating the factor of a number this a fairly long array formula I decided to try to write this in vba to use as a user defined function. I first decided to record a macro of me writing the formula in excel to see what the code looked like, this I then adapted in another module copying the basic formula in a function procedure. my recorded macro works fine when I run it but my adapted function shows an error namely that the FormulaArray is not defined. I've tried all kinds of variations but with no success. how do I write an array formula in V.B.A.
View 13 Replies
View Related
Oct 16, 2005
I have a list in excel that contains the same sku more than once on a
workbook in no paticular order, however i want to bring back the last
time that this sku appeared on the workbook for example:
SKU 271562 date counted 11 september
SKU 275555 date counted 12 september
SKU 271562 date counted 12 september
sku 255212 date counted 13 september
& so on
SKU 271562 date counted 11 october
The date range is only applicable to the date counted therefore i
cannot search via a date
2. vezerid Oct 13, 7:09 pm show options
Newsgroups: microsoft.public.excel.worksheet.functions
From: "vezerid" <veze...@act.edu> - Find messages by this author
Date: 13 Oct 2005 11:09:27 -0700
Local: Thurs, Oct 13 2005 7:09 pm
Subject: Re: Excel help
Reply | Reply to Author | Forward | Print | Individual Message | Show
original | Report Abuse
View 14 Replies
View Related
Aug 27, 2009
The following formula works, but takes far too long for an efficient user to run (note the array):
{=(MAX(IF(($B$4:$B$50000=$B4)*($I$4:$I$50000=$X$1),1*$J$4:$J$50000)))}
B = Number Values (e.g. 3431003)
I = Simple Text Values (e.g. I, P)
J = Dates (e.g. 4/15/2009)
Is there a formula that would provide the same result in a quicker fashion?
Note: Unfortunatly, the data will get up to 50,000 rows.
View 12 Replies
View Related
May 9, 2007
is it possible for an Array formula to be 3D? I am having no success, and I have heard it is - if you know how to do it right...
View 9 Replies
View Related
Jun 1, 2007
Seems not.
For example,
=SUMPRODUCT({1,0,1,0},F24:F27)
is ok. But
=SUMPRODUCT({if(F24=1,1,0),0,1,0},F24:F27)
is not.
Why is this so or is there a way to go aroung this?
View 9 Replies
View Related
Aug 25, 2009
I have a lengthy array formula that I try to enter using VBA. I get the common run-time error. I tried breaking it down, but that did not work. Maybe the syntax was wrong in the break down. Can some help out please?
=IF(COUNTIF($B:$B,B2) 1 Then
Range("B" & x).EntireRow.Delete
End If
Next x
Application.ScreenUpdating = True
View 9 Replies
View Related
Aug 28, 2009
I have a custom UDF (user defined function) that I have been using for about 2 years with success. I am now trying to use it in an array formula and getting a #Value! error.
The UDF looks like this...
=MyUDF(A1,B1)
...where A1 is a string to be evaluated and B1 is a number. Basically, the function returns another number depending on the relationship of the two inputs. I have not had any issues in the past using it as shown above.
Now, I would like to use this function on a range of cells and sum the results. Here is what I have now...
{=SUM(MyUDF(A1,B1:B100))}
Does anyone know why this returns a #Value! error?
View 9 Replies
View Related
Jan 19, 2014
I am using the following array formula "=SUM($I$35:$I$1000*($G$35:$G$1000=$B$10))" which works fine but if there is nothing to sum it returns "0", but I would prefer a blank cell if there is nothing to sum.
View 3 Replies
View Related
May 24, 2014
I have attached a spreadsheet of data that I would like to reduce.
In the workbook there is a set of data (rows 1 - 24) which are defined with random dates (row 2) and number criteria column A.
In the table below that (rows 28 to 37) I have set out how I would like to present the data. how to create an array formula that sums the above data months into the criteria of column A.
View 5 Replies
View Related
Jul 30, 2014
For example the formula below is in cell AU6. I want to exclude A6 from the array. Row AU7 would need to exclude A7 when I drag it down.
=MAX(IF($A$6:$A$493=AT6,$AS$6:$AS$493))
View 3 Replies
View Related
Dec 2, 2008
I am trying a simple Index or Array formula and have been trying all day to get this work to no avail. The data is freight costs for shipping different size containers (20' and 40') to different ports (Lyndhurst, Port Coquitlam and Seattle).
I will have the port name plugged into one cell and the container size plugged into another cell and want to pull the corresponding freight cost out into another cell. The red text in the file are the data that I will plug in. The box below is where I would like the result.
View 5 Replies
View Related
Mar 2, 2009
I have a list of 187 countries and I would like to find a way to do this with an array and not by hand. Attached here is an excel with a sample; I would like to compute the standard deviation of the variable for the period 1980-2008 for each country separately. Is there a way to do this without me having to select by hand the range corresponding to each country in the st dev formula?
View 5 Replies
View Related
May 6, 2009
I have a function that has a formula sumproduct and here it is:
Set RSheet = Worksheets("Rawdata")
Set RSheet = Worksheets("Rawdata")
RSheet_lastRow = RSheet.Cells(Rows.Count, "A").End(xlUp).Row
RSheet.Range("AJ2:AJ" & RSheet_lastRow).Formulaarray = "=SUMPRODUCT
((V2>=ProjectedStarts!$K$1:$K$45)*(V2<=ProjectedStarts!$L$1:$L$45),ProjectedStarts!$M$1:$M$45)"
The problem is that when the formula is sent to each cell V2 (bolded) does not change to V3, V4, V5.
View 3 Replies
View Related
Jul 6, 2009
In a spreadsheet I have a large table in one tab with a row of numbers, and column of numbers with an array of numbers under each.
Closes example I could find on google is ....
View 14 Replies
View Related
Jul 8, 2009
I'm working with several columns of data that represent the types of employees we have at my organization. I'm trying to count the number of each type by status, as well as determine the salary payments to each type.
My problem is that we have titles like "PAA I" "PAA II" and "PAA III" and I've not been able to quite figure out the right formula to deal with this problem.
View 2 Replies
View Related
Jan 29, 2010
I have the following information (small sample only):
CodeItemList
162AVS0001 AVS0001
162AVS0002 AVS0003
162AVS0003 BUD0002
162AVS0005C5O1208
102BRE234CAL0007
102BRE-508EQU0003
102BRE-AB09 FXUK21916/2
162BUD0002GMC0003
162C5ENV-TNT HSS0001
162C5O1208 HSS0006
162CAL0005 IBM0003
162CAL0007 KUN0002
The list on the right is derived from the following array formula which has been copied down the column to end of the data range:
{=VLOOKUP($G$130, INDEX(G133:I252, SMALL(IF($G$130=INDEX(G133:I252, , 1), ROW(G133:I252)-MIN(ROW(G133:I252))+1, ""), ROW(1:1)), , 1), 2, FALSE)}
$G$130 refers to a value in that cell which is user defined from a drop down list and in this instance, the value is 162. Therefore, I would expect to see all of the items that contain 162, under the list column. As you can see, it has not returned all of the values relevant to 162. It has missed AVS002, AVS005 C5 ENV and CAL0005 in this example. The ommissions seem random
View 2 Replies
View Related