I am trying a simple Index or Array formula and have been trying all day to get this work to no avail. The data is freight costs for shipping different size containers (20' and 40') to different ports (Lyndhurst, Port Coquitlam and Seattle).
I will have the port name plugged into one cell and the container size plugged into another cell and want to pull the corresponding freight cost out into another cell. The red text in the file are the data that I will plug in. The box below is where I would like the result.
I know I can do this as I have already succeeded once but since moving a few things on my spread sheet the formula has gone wrong and I can't correct it.
I have one sheet with many different lines on and another I would like to select certain rows with the same reference number in column A. Below is the formula I am using
Imagine 5 periods of sales, growing by $550 per year, from $250 to $2,250. There is a columnar table with sales in increments of $500 to $2,000 paired with margin percentages.
Using INDEX(MarginColumn,MATCH(Sales,SalesColumn,1)) successfully retrieves the correct margin % for each period where Sales is that year's sales.
So, I tried to construct an array formula in the following way:
Sales is not changing, so that only the 1st year's margin percentage is being applied to each year's sales. I confirmed this by extending the array to a multi-cell layout.
How can I correct the formula so that the margin percentage is looked up as if it were using each year's sales independently? I know I can just SUM the array once this works, but this is my current road block.
P.S. If you see this answer immediately, how might I multiply the percentages by the sales that increase by $500 and sum the whole expression into one cell?
I'm using the following formula to look at a range of cells and return the most common text entry. The formula works fine as long as there is text; if there are more blank cells than entries, then it returns a 'blank' and my formula cell is empty. How to clean this up so that it ignores blank cells?
I need to find a way to find an array in a tab to use for an index/match function I have.
this is what i would normally use: =index(tab_array,match($a2, tab!$a$1:$a$1000,0),match($B$1,tab!$a$1:$zz$1,0))
This formula would usually work fine when I know that within the tab, the array in which the row match is searching doesn't change. However, that array may change in the future, to say column H, without my knowing as it is a database that gets automatically populated from an upstream system.
Is there a way to search for an array within an index/match?
I am trying to understand how to use index and match in an array formula. Probably easiest to take a look at my example sheet. For some reason, the first result is working, but the others aren't.
[URL] .....
Alternatively, here is a screenshot.
Uploaded with ImageShack.us
The formula I have tried is: =INDEX($E$3:$E$11,MATCH(1,IF($A$3:$A$11=G3,IF($B$3:$B$11=H3, IF($C$3:$C$11=I3,IF($D$3:$D$11=MEDIAN(J3,K3,$D$3:$D$11),1,0) ,0),0),0),0))
I have spent hours doing this code to try to identify the value's row and column in a 2D array. However, it shows an error message "Unable to get the match property of the worksheet function class"
Public Sub MatrixMatch() Dim V As Variant Dim Value As Double, _ RowOrColumn As String Dim m As Variant, n As Variant Dim i As Integer, j As Integer Dim Temp As Variant Redim V(1 To 10, 1 To 5) For i = 1 To 10 For j = 1 To 5 V(i, j) = Range("A39").Offset(i, j) Next j Next i m = UBound(V, 1) n = UBound(V, 2) Value = 3.5.....................
Please see the attached worksheet for details. I would like the array function to search for instances of the word "FALSE" in column E and return the values of columns A:D when a match is found. I have done this successfully when the lookup value is a value in the first column of the range, but cannot seem to do so when the lookup value is in the last column of the range. I have received a #NUM! error each time.
My array is H42:N72, in H42:H72 I have numbers 15,14,13....0,-1,-2,-3, etc...
In N42:N72 there is a corresponding $ amount that I would like to return based on finding the value which is greater than 4.7 (so, looking to match the $$ amount to the number 5 in column H42:H72)
I've tried using INDEX MATCH but can't figure this out.
I am currently looking at a simple data set spanning a few years of annual average data. I want to create a front sheet to show people in what year the maximum value was reached for each site but am having trouble returning the values......
The summary sheet is headed:...... I want the formula to say - find the summary sheet max value cell in the main data sheet row 2 (for XYZ) and return the corresponding column from row 1 (year). I've got myself in a muddle trying to create array data from the index function and want something simple. There are only about 30 rows so am happy to manually select the rows in question and repeat the formula entry so it doesn't need to be fancy.
Solution for all: {=SUMPRODUCT(SUMIF(Sheet1!$A$2:$A$16,$F$34:$F$40,INDEX(Sheet1!$B$2:$K$16,0,MATCH(T$10,Sheet1!$B$1:$K $1,0))),U34:U40)}
Say I have an Excel workbook with two sheets: Employee Hours and Employee Wages. On the Hours sheet I have 31 columns (Jan1 - Jan31) with inputs for the number of hours worked by each employee by day. On the Wages sheet I have listed the same 31 columns with their wages each day (I do this to factor in wage increases that occur fairly often).
My goal is to use an INDEX/MATCH function to calculate the total daily compensation for each day on the Wages sheet by multiplying hours*wages for all employees that day. Here's the code I'm using:
Where A3 D7 and A4 concatenate to form a workbookname!named range1 and equally A3 D7 and A5 form workbookname!named range2 works perfectly well for a fixed range as named range, but not if the named range is dynamic using the typical OFFSET, COUNTIF method?
I need to be able to concatenate the range reference in this way, but for the named range reference to be a dynamic range that will grow and change with additions etc.
The context of this problem is that I am pulling sales data from different outlets to analyse monthly sales. The data from the various outlets are in various formats and the products, even though they are the same throughout all the stores, are named differently. For example, Mushroom Soup can be named as "Soup Mushroom", "Mushroom Soup" or "Cream of Mushroom". This makes analysis really tough.
I first created a table with a list (K6:P6) that had the varying names of the products. This is shown as the first table with 3 rows.
Then I tried to match this list to a range of products sold by an outlet e.g. Electric. (shown in the next bigger table $D$10:$D$254, ) Next, I used Index to call up and display the sales of that product next to table with list A ($G$10:$G$254)
This works for some entries but not for all. I get mostly #NA answers even though I do ctrl-shift-enter. Also, the bigger table is in a separate file and I am using excel 2010.
How to do INDEX MATCH ARRAYS. (to populate my report I need to match multiple rows and columns from source sheet to import data).
Now I am trying to replicate same in VBA. (for this example row1&2 & column1&2 on both seed(source) and result(one I am trying to populate) sheets).
I wrote the code below that works just fine for 1 CELL.
Sub Button1_Click() Range("C4").FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(A4&B4,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)" End Sub
I know in excel I can simply drag the formula across rows/columns to populate them automatically and the way I would do this in VBA would be by creating loops.
Here is what I have that needs improvement
Sub Button1_Click() Dim iRow As Integer For iRow = 3 To 4 Range("C" & iRow).FormulaArray = "=INDEX('SEED'!$A$1:$f$6,MATCH(AiRow & iRow,'SEED'!$A$1:$A$6&'SEED'!$B$1:$B$6,0),3)" Next iRow End Sub
Here iRow is to identify row number, and to keep simple I am only doing 2 rows. but how do i write MATCH statement to identify rows needed to be matched from SEED sheet?
Date Open High Low Close Volume Adj Close Semi-Annual Yield Theoretical Bond Price Index Coupon Total Value Peaks Troughs
[Code] ..........
The Relevant columns would be "Date" column A cell 1, "Total Value" column L cell 1, "Peaks" column M cell 1, and "Troughs" column N cell 1. What I basically want to do, in the next column, column O, is this: If cell N# = "Trough" find the previous M cell = "Peak" and take the L cell in that "Peak" row and subtract the L cell in the Trough row from it (like =(L4-L9)/L4)). Then in column P, if the percentage drop was 5% or greater, I want to find the days between the trough we are looking at, in cell n10, and the NEXT Peak, cell M11, using the corresponding dates in Column A.
When I try to populate a worksheet with the data from a multicolumn listbox on a userform.
I have references which list index is to go to which cell on the worksheet, however if there is no entry in this list index it is giving me this error.
As the listbox could have 1 line or up to 10 lines populated, I think I need to put an error handling on so that if the entry in listbox index is "" then resume next, or something like that. However everything I have tried doesn't work and I keep getting this error.
Here is the code I have to populate the worksheet from the listbox. There are 7 columns and 10 rows.
How to handle this error?
[CODE] Private Sub cbPrint_click() Call Error_Handling_VBA_On_Error_Resume_Next Dim ws As Worksheet Set ws = Worksheets("Invoice Copy") With ws .Range("B11") = CusName.Value
I have sheet full of data containing results of multiple tests on various equipment.The sheet contains many columns of data but below are the specifc criteria i want to use to extract the data. As maintenance is carried out regularly the list is always growing. I want to create a dashboard summary of the "Machines" which i will colour using condition formatting. I will list the machines in the columns and would like the rows below each machine to be populated with the results.
Column 1 Lists the various factories Column 2 Lists the Machine Column 3 Lists the Part Column 4 Lists the result.
Results can either be "ok", "warning", "Alert" only
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
