I have an excel sheet with 20 different tabs. All the tabs contains 1st column with same header as Customer ID.
I need a macro which copies the 1st column from every tab and paste it in 21st tab.
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View Related1. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".
View 4 Replies View RelatedIn sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies View RelatedCode:
Range("a" & Cells.Rows.Count).End(xlUp).Select
Range(Selection, "a1").Select
For Each cell In Selection
If Not IsEmpty(cell.Value) Then
If cell.Value "2012*" Then
cell.Copy
cell.Offset(0, 5).PasteSpecial
End If
End If
Next cell
I have a to copy from column A some cells ( e.g "000005PR RODI T.R, S.L.") and paste it in column F. The problem is that in column A i have as well empty cells and cells that have date (e.g "2012 02 14-OCT-2011 CN 100725") . Neither the IF/AND nor the "double" if constructs are working .
I want to copy a cell from a column and paste it to next column and up one row. My current data looks like this:
DATA
1234
I want to make it look like: DATA 1234
This may seem dumb but I'm having trouble pasting the contents of a column in one spread sheet into a column in another spread sheet. I get the error message about the copy area and paste area not being the same size. The data in the column is nothing complex, just a list of names, but there are 2500 of them so typing or copy/pasting each one individually is not a desirable option. I've been on this for hours with no success. The only hurdle that may complicate things is the sheet that I want to paste to is using the top 12 rows as a 'home-made' header so I need to start the paste at row 13.
View 4 Replies View RelatedI need code automatically copy and paste column A to column B every very three seconds
View 8 Replies View RelatedI have data that looks like this:
ADD ADD 5
ADD EMPTY 2
AGAINAGAIN26
AGAIN EMPTY17
AGAINBACK 1
ALL ALL 24
ALL EMPTY19
ALRIGHT FINE 1
ALRIGHT OKAY 2
ALRIGHT ALRIGHT3
ALRIGHTEMPTY3
ALRIGHTRIGHT1
I want it to look like this:
ADD ADD EMPTY
5 2
AGAINAGAINEMPTY BACK
26 17 1
ALL ALL EMPTY
24 19
ALRIGHTFINE OKAY ALRIGHTEMPTYRIGHT
1 2 3 3 1
i.e all the entries from column B that have the same thing in column A should be on a row together, with the number from column C under them.
If that's a bit hard then it would be OK if it looked like this:
ADD ADD 5
ADD EMPTY 2
AGAINAGAIN26
AGAIN EMPTY17
AGAINBACK 1
ALL ALL 24
ALL EMPTY19
ALRIGHT FINE 1
ALRIGHT OKAY 2
ALRIGHTALRIGHT3
ALRIGHTEMPTY3
ALRIGHTRIGHT1
test.xlsx
I am trying to copy data from one workbook to another. I have an excel Database (Sheet1) with a macro that prompts the user to select an excel workbook which has the data I'm trying to copy.... I got this part down....From this opened workbook, I want to copy the Range("C2:C12") and paste into my database(Sheet1) workbook.
However, I need a dialog box to pop up for a user input to designate which row the data must be pasted into. The dialog box will search column H in the database (Sheet1) workbook to designate the appropriate Row # in which the data will be pasted.
Now the ranged that I copied earlier will need to be pasted selectively if possible. Range C2:C8 will be pasted from Column HG:HM and C9:C12 will be pasted from HO:HR. Is it possible to selectively paste a range in such a manner or should I just split it up? I'm not really sure the order in which I should do these commands or how to go back & forth from one workbook to another. I would like for the workbook filename to not be a factor.
I m finding the last used column and pasting a formula in the same row to the last column. Here is what I have used and it isn't working.:
View 5 Replies View RelatedI have the following codes, they almost work. I run the first code, and it copies and pastes the data, however, when I run the second code, it deletes the information that was previously pasted on column A.
Code:
Sub copy_Client_ID_Tickets_to_Top5_Ticks()
Dim rng As Range, WS As Worksheet
Application.ScreenUpdating = False
[Code].....
Range("A1").Select
Selection.Copy
Range("B2:B58").Select
ActiveSheet.Paste
Selection.Font.Bold = False
End Sub
in the section of this Macro, how do I simply copy A1 and paste it to all entries in column B. My range will vary (it won't always be B2:B58).
So,
Range("B2:B58").Select
I want to make a vba (macro) for excel that will look at the column to the left of an active cell and if there is a formula there drag it over to the right into the active cell and if there is not a formula there copy and paste value of what is in the active cell into itself deleting any formulas that may have been there. on top of that if the cell to the left of the active cell has no boarding I need to copy it and paste format to active cell. I need it to continue a number of times to be decided in cell A1 and just go down the column doing this. Please help, I know it sounds hard but I need it for 10,000's of lines of code and really cant do it by hand ...
View 8 Replies View RelatedNeed code to copy a column from a worksheet, and paste it in the first empty column in a second worksheet? I can do this easily when I want to copy/paste to the first empty row using the
Sheet3.Select
Range("A1:A10").Select
Application.CutCopyMode = False
Selection.Copy
Sheet2.Select
Dim LastCell As Range
With ActiveSheet
Set LastCell = .Cells(.Rows.Count, "A").End(xlUp)
If IsEmpty(LastCell) Then
'do nothing
Else
Set LastCell = LastCell.Offset(1, 0)
LastCell.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End If
End With
but I cannot find a way to change this to columns!
I am trying to create a macro that will reformat my data from A2:QB24 into 9 columns starting in N28:V28 with the data from every 9 columns pasted underneath each other.
Basically, I need to start with copying Range A2:I24 and pasting it into cell N29, then copy Range J2:R24 and paste it into cell N53, etc.
I have an Excel Spread Sheet that lists all of the people who have been issued Keys in your workplace, so the row has multiple information columns (Name, Department, Key Code, etc). One row is titled "Left Workplace" and you can select either a Yes or a No. Based on that selction I want it to copy and paste into a different spreadsheet (Either Inactive - if "No" is selected or Active - if "Yes" is selected) What is the best way to go about this?
View 2 Replies View RelatedI am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
View 9 Replies View RelatedIn the .xls I am working there is a column with miscellaneous info about the job such as "Copy machine HP3X1A requires service"
I have been charged with going through 1 year's worth of calls (1248) and pulling that printer name (the "HP3X1A) out of the misc. column and putting it into a new column titled "Printer Name"
The printer names vary a bit but usually start with the same three letters.
Is there any function or formula or whatever I can use that will be able to identify these printer names and export them to another column?
i.e. COPY all "HQPxxx" from column 7 and PASTE to column 2
This would save my an ungodly amount of time. I've been doing it for a bit less than an hour and I'm only on to October.
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test()
Range("I1").Select
Selection.Copy
Range("A2").Select
ActiveSheet.Paste
End Sub
I have the price of S&P 500 in the L2 until L145 column.
And I would like to past each cell (L2, then L3, then L4....until L145) 220 times in column F.
As follow
L :
1780
1715
1680
.........(144 value)
TO column F
F:
1780
1780
1780
.........(220times)
1715
1715
1715
.........(220times)
1680
1680
1680
........(220times)
getting a vba formula to copy values from two columns and paste it in 3rd column on the click of a button.
For example:
if I have 3 rows filled in column A and 5 rows filled in column B then i need a formula to copy 3 rows in A and 5 rows in B and paste it to column C. so column C will have 8 rows now.
The number of rows the value can be entered can vary. [ example: sometimes we may have 6 rows filled in A 2 rows in B ]
In Sheet1, I have 1000 columns with data from A1:A100 to ALL1:All100. I want to copy each indivdual column and paste into one colunm in Sheet2.
View 10 Replies View Relatedi face a problem with this, refer to the Book1.xls. i don't know how to explain it. it is very simple but i don know how to do it.
View 2 Replies View RelatedI've two sheets: "present" and "removed". I would like to have a whole row copied and deleted and existing rows moved up in "present" when I type the word "yes" in column E. The deleted rows are to be pasted into "removed", with two extra pieces of data - date removed and name of person removing it - to be asked in pop up boxes and inserted into col F and G respectively in "removed".
View 4 Replies View RelatedI know it's very simple; I'm obviously a beginner. What I would like to do is to have an input box prompt me and then take these values and paste them into columns. One value for each column. Ideally what I would like to have happen is for the values input into the inputbox to be pasted to specific cells. I have attached an image for reference. The beginning of the range B10 and C10 will be fixed but the ending cell range B14 and C14 will be variable based on the number of entries; essentially one less than the total number of forms on row 15.
View 11 Replies View RelatedCopy and paste data if row in Column N is empty.
Here is my current code