Copy And Paste Worksheets As Values To Named Folders
Jan 26, 2007
Am trying to copy 50 worksheets from One workbook, into separate existing files (overwriting previous file) in existing folders; once copied, destination files can not be linked to source file.
I'm able to copy the tabs into new workbooks, in the correct folders, but when trying to perform PasteSpecial in new books, original source file is also pasted over.
The parts of the file name and folder location are cell values located on each sheet.
...
For Each sheet In ThisWorkbook.Worksheets
sheet.Copy
Set workbook = ActiveWorkbook
With workbook.Sheets(1)
.UsedRange.Copy
.UsedRange.PasteSpecial xlPasteValues
.Cells(1).Select
Application.CutCopyMode = False
End With
Been playing with this for some time and can't quite figure it out. I'm trying to copy a named range and paste special value to another named range of the same size. I recorded a Macro that does what I need, and I'll use if necessary, but thought I'd try to consolidate the code a bit and can't get it to work. The recorded macro is as follows:
Sub PasteRanges() Application.Goto Reference:="DataCopy30Yr" Selection.Copy Application.Goto Reference:="DataPaste30Yr" ActiveSheet.PasteSpecial Format:=3, Link:=1, DisplayAsIcon:=False, _ IconFileName:=False End Sub
My attempt to consolidate was this:
Sub PasteRanges() Range("DataCopy30Yr").Copy Destination: Range("DataPaste30Yr").PasteSpecial (xlPasteValues) End Sub
I get the Run-time error 1004 Copy method of Range class failed when I try to run this. Again, I can use the longer version with no problem, but in the interest of learning and since I have spent some time not being able to come up with the solution, I thought I'd ask the experts opinions before I gave up on it.
I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path). I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the
Windows("xxxx").Activate
command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).
I can use the
ActiveWindow.ActivatePrevious
command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.
I realise this is probably very basic and I've searched the forums but can't find any identical postings.
I am trying to create a macro to copy multiple sheets to a single named worksheet, all within the same workbook. The code below works, except I want to copy only the data (no formulas). Can I add code to paste values, or do I need to start over?
Public Sub CopyandPaste() Dim ws As Worksheet Worksheets("Summary").UsedRange.Delete For Each ws In Worksheets If ws.Name <> "Summary" Then ws.Range("a2"). CurrentRegion.Copy _ Destination:=Worksheets("Summary").Range("A65536").End(xlUp)
I need to back up files, which may be excel or MSword, by copying them from different directories, say C: to the backup directory, say X:. any vba to backup the files? I expect the vba can copy all file listed in column A.
E.g. C: est1File1.xls or C: est2File2.doc, and then pasted to the directory in column B. e.g. X:BackupFolder1 or X:BackupFolder2.
I am trying to create a macro that will copy any folders that exist in any of the paths listed in the first column. The folders should be copied to the path of the open workbook containing the macro. Below is the macro I have currently, much of which was taken from information I found in this thread [URL]....
VB:
Sub wrapper3() x = 1 Set fs = CreateObject("Scripting.FileSystemObject") While Sheets("Air").Cells(x, 1) <> "" v = InStrRev(Sheets("Air").Cells(x, 1), "") dest = ActiveWorkbook.Path & Mid(Sheets("Air").Cells(x, 1), v, 99)
[Code]...
This code seems to work fine if all of the folders exist to be copied. My problem is that some do not and it is creating a "Path Not Found" error for which I need a fix. If the folder doesn't exist at the path nothing should be copied and the next path can be evaluated.
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData() Dim counter As Integer counter = Sheets("Imported Data").Range("Counter")
I want it to return the subfolders from a named folder, but only the folder name, right now it returns the whole path. So my code has to then text to column that path, then delete the columns I don't need. Is there a way to shorten this? Here is my code so far:
'Lists Folders' Worksheets(1).Range("A3:A300").Value = ClearContents Worksheets(1).Activate Dim row As Integer Dim SearchFolders As Variant row = 3 LookInTheFolder = "I:projects2Koch58MY8900PROCESS2013 Work (Phase 3)DIH_SulfolaneEquipment"
I want to be able to loop through all the sheets and copy similar named worksheets to seperate workbooks. So all the VARIOUS go to one workbook, all the PART 1000 goto another, and all the PART 1001 goto another. I can only determine the worksheet names by looping through all sheets - as I am not sure what they will be called because it is done programmatically. ALL sheets will contain a "(n)" where n is the sheet number, so I believe can extract similar names from the string preceding the left bracket.
At the moment I just lump ALL the worksheets irrespective of name to a single workbook creating an array and using the SPLIT function. This is very efficient and what it does, and I still want to use the SPLIT function and arrays.
this is the code I currently use, any help much appreciated!!! Please tell me how to modify this existing code to clump together similar names and copy - I guess I will need to loop multiple times to achieve this.
For Each mySheet In ActiveWorkbook.Sheets
Range("Arc").Value = "'" & Range("Arc") & "," & mySheet.Name If Left(Range("Arc").Value, 1) = "," Then Range("Arc").Value = "'" & Right(Range("Arc").Value, Len(Range("Arc").Value) - 1) End If Next
I have a workbook that contains budgets for as many as 50 divisions. I don't always know what the names of the divisions are going to be. I need a macro that will go through each worksheet and copy aa1:ao200 and paste it to a worksheet named "upload" in the next available row.
Here is something that i found here but i cant make it work.
Sub Macro4() ' Macro4 Macro For Each ws In ActiveWorkbook.Worksheets With ws Range("AA1:AO200").Select Selection.Copy If Application.WorksheetFunction.CountA("B:B") = 0 Then
I would like to create a series of folders in explorer using a range of cells A1:A162 for the names of the folders. Wondering if there is a way that I can automate this using VBA versus doing it manually .
I have attached a workbook that creates new folders based on text in a cell. As you can see when the button is pressed it runs the macro which when it is done calls the next & so on. What I would like to know is there a way of acheiving the same results with a single macro. Eg column A contains 4 cells with text. The macro when run will check for cell content then create folder based on that text macro will stop when next cell is empty.
For some reason the following code, when executed, pulls a named range from the source workbook (sProj_Name). I feel like I have used this exact same code before and not encountered this issue. This named range is linked to the source workbook so if I save the file and re-open I get the wonderful 'would you like to update links' pop up. I cant figure out why, when I am forcing it to paste only values and formats, it is picking up this named range. In addition the source workbook has way more than one named range, so why it doesn't pull all instead of just one is a mystery to me as well.
VB: With Workbooks(sProj_Name).Worksheets(2) .Cells.Copy Sheet2.Cells(1, 1).PasteSpecial Paste:=xlPasteValues Sheet2.Cells(1, 1).PasteSpecial Paste:=xlFormats Application.CutCopyMode = False End With
I am a trainee dermatologist. We undertake allergy patch tests. There is a long list of different patch tests which are selected based on the patients history. I have put each of the types of patch testing on a master sheet. What I would like to be able to do is to have a control button next to each set, and when clicked would add that particular set to a "new patient" worksheet tab. And with every set having its own button, more than one set could be added to a new sheet. In the new patient worksheet id like the sets added with a single row gap between them.
I had tried, and managed to get a single series to work, but then it wouldnt allow me to add the next set, saying that sheet already exists. Ideally finally, id like there to be some way, or message to make sure after printing the new patient worksheet gets deleted. I hope that all makes sense ! Even if I had a code for a single button that added to a master sheet at the next available row +1 I think I could manipulate the code to suit.
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
In Excel 2007, Windows 7 Home Premium, I am trying to summarise multiple worksheets into one sheet, creating a list in one column in this summary sheet that includes the cell contents from the same cell from each sheet. For example, my first sheet is called KCD183 and I want to list the value from KCD183 Cell A2 in my Summary Cell A2, then show KCD184 Cell A2 in Summary Cell A3 (i.e. the next row down). So my Summary sheet will list all cell A2s from all my sheets, 1 after the other down column A and will continue to add these for any new sheets I add.
I realise that I could just export the spreadsheet to Access and report on it from there, but I don't have the software!
I have the following code that I would like to use to create generic estimates for common jobs that happen all the time.
Sub CREATEESTIMATE() Dim wsEst As Worksheet Dim wsList As Worksheet Dim wsData As Worksheet Dim smallrng As Range Dim destrng As Range Set wsEst = Worksheets("Estimate") Set wsData = Worksheets("Brk-oil-44kv-data") Set wsList = Worksheets("Estimate List") lngMax = wsList.Cells(Rows.Count, 1).End(xlUp).Row For Each Cell In wsList.Range("F2:F" & lngMax) If Cell.Value = "BR-O-44-RR" Then Sheets("Estimate").Activate.......................
1) When I run the macro the data that needs to be paste under the Station Maintenance rows does not appear. It just pastes the first section (6 rows of 72 rows).
2) The Task # does not renumber automatically - but with the SAME code it renumbers properly for the CMS Task #.
3) Under CMS it copies everything properly except for data that should be in column I - the data is on the data sheet "Brk-oil-44kv-data".
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
I'd like to copy/paste from different spreadsheets. The place it will be pasted is specific.
Sub Family1() Range("A2").Value Sheets("Black Market").Select Range("C3:C35").Copy Sheets("Profiles").Select Range("B2").PasteSpecial Sheets("Real Estate").Select Range("E3:E30").Copy Sheets("Profiles").PasteSpecial End Sub
I've coded wrong. I get "Run-time error 424: Object required" when I run it.
Dim ws As Worksheet x = 0
For Each ws In Worksheets Select Case UCase(wSheet. Name) Case "SAMPLE RESOLVED", "RESCALLTYPE", "DATA", "SUMMARY" 'Do nothing Case Else ws.Range("J22").Copy Destination:=Sheets("Summary").Range("B2").Offset(x, 0) ws.Range("C3").Copy Destination:=Sheets("Summary").Range("A2").Offset(x, 0) x = x + 1 End Select Next ws
I'm trying to copy range from one worksheet to another. I'm guessing there must be something wrong with my syntax here:
For Count = 2 To 50 If Sheets("sheet1").Range("H" & (Count)) < 0.1 Then Sheets("sheet3").Range("A" & (next_place), "K" & (next_place)) = Sheets("sheet1").Range("A" & (Count), "K" & (Count)) next_place = next_place + 1 End If Next Count
i am trying to create an invoice with the data from one sheet(invoice list1)to copy this and populate an invoice that i have in another workbook(invoice)
i need to generate for however many lines there is in the invoice list the equivalent number of invoices.
ie the data in list will be copied to relevant cells in invoice so
cell A4, A5 FROM (INVOICE LIST1) will go to cell B10, C10 of ("invoice" workbook) cell E4 and f4 go FROM (INVOICE LIST1) go to cell b11,b12 ("invoice" workbook)
and cell g4(invoivelist1) will go to d12 of "invoivce"
- I have a worksheet (W1) which i have filters - I have another worksheet (W2) that is formatted for a institutional purpose where i must put the things selected in the W1, but the problem is that: in the W1 i have a cell (A1) with some data but in W2 i have a space composed with one line but with several columns and excel says that he cannot paste the information copied in W1 to put in W2. there is any way to avoid this problem because at the moment i am making copy paste one by one, and it takes to many time and i would like to copy and paste the information selected by the filter in W1 to paste in W2.
I want to copy from a MasterSheet and paste into multiple sheets that are already there with out creating new ones.
I need the code to miss the first 5 sheets and then paste to the rest.
I have found this code but not sure how to change it to meet my needs
Sub test() Dim ws As Worksheet Dim i As Integer Set ws = ThisWorkbook.Worksheets("sheet1") Application.Calculation = xlCalculationManual Application. ScreenUpdating = False For i = 1 To 31 Debug.Print i ws.Copy Sheet1 Next i
I have a workbook with 6 worksheets in, 5 worksheets contain data whilst the 6th I will use as a search worksheet. The 5 data worksheets contain columns A to J which have text entries in.
What I would like to click a button on the search worksheet, lets call it worksheet 1, and for an inputbox to allow the user to enter a text search. The macro would then search for this text in columns A to J and all rows (or rows with data in) on the 5 data worksheets, and if found, copy the entire contents of those rows where the text is found and paste them into worksheet 1, the search sheet.
I have done a forum search and found a few examples of this type of search but not across multiple worksheets, also I found this code that does search across multiple sheets but does not copy and paste:
VB: Sub Find_Data() Dim datatoFind Dim sheetCount As Integer Dim counter As Integer
I am working with a workbook that i have created. The workbook has around thirty worksheets all with the starting nave of "DIV". I have a code that will loop throught the wrok book and copy the used range and insert them into a master. However what i need is a code that will loop through the wroksheets and only copy the used range only in columns A:P and starting in row 10 (i have headers from row 1-10). I have columns beyond "P" that has working information for that worksheet and do not want to copy it over to the master.
I'm writing some macros in excel in an effort to transfer over from Lotus 1-2-3 but have hit a major roadbump. The macro is fairly complex and takes a while to run and I'm trying to cut down on the Run Time. As of right now lotus does it about 6x faster. I think a big roadblock here is that in the macro I built in excel when copying and pasting values into another worksheet, the coding has to
1)select the cell to copy 2)switch worksheets 3)select the cell to copy to 4)paste or paste special into that cell 5)switch back to first worksheet Etc...
for every single value I want to copy over. With lotus it was possible to just copy values to an defined name in another worksheet without leaving the current one. This would greatly decrease runtimes and I was wondering if anyone knew how to code for this.