Copy And Paste From Unknown Named Worksheet?
Dec 22, 2011
I have a workbook that contains budgets for as many as 50 divisions. I don't always know what the names of the divisions are going to be. I need a macro that will go through each worksheet and copy aa1:ao200 and paste it to a worksheet named "upload" in the next available row.
Here is something that i found here but i cant make it work.
Sub Macro4()
' Macro4 Macro
For Each ws In ActiveWorkbook.Worksheets
With ws
Range("AA1:AO200").Select
Selection.Copy
If Application.WorksheetFunction.CountA("B:B") = 0 Then
[code]....
View 2 Replies
ADVERTISEMENT
Sep 4, 2007
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop
View 8 Replies
View Related
Aug 12, 2009
I need to copy a range of values (actually two ranges). The ranges are of fixed size. Le't say A2:D20 and E2:H20.
Both workbooks have the exact same layout, and they both have the same named worksheet (in this case it's called Entry). However the actual filename of the source workbook is unknown. I know numerous users have changed the filename of the xls file.
I want to instruct them to open the old and new workbook, and open a third workbook containing the copy macro, they run the macro and it copies the data.
How can I reference a known worksheet name but of an unknown workbook name esp when the source and destination share the worksheet name?
View 3 Replies
View Related
Sep 9, 2006
I need to make named ranges from an unknown number of columns(at least 1) each with an unknown number of rows. Each column has the name of the named range as the first row, and then a variable number of rows containing part numbers.
I can do it 1 by 1, but id rather do it in a loop so that blanks dont cause errors. there will be different people using versions of this sheet with different model/part number information What i've tried: Count number of colums with row 1 containing data (11 max, which is more than will ever be used) add into array(I know i dont really need to add into the array, but i might use it later for some other code). The problem i'm having is finding the range of rows that need added to the named dynamic range and adding it.
modelcount = Range("G7") 'G7 (for now) contains =COUNTA(H1,I1,J1,etc)
For i = 1 To modelcount
Redim Preserve Models(0 To i)
Models(i) = Cells(1, i + 7)
Range1 = Cells(2, i + 7).Address(xlA1)
lastRow = Cells(rows.Count, i + 7).End(xlUp).Row
Range2 = Cells(lastRow, i + 7).Address(xlA1)
Reference = Cells(2, i + 7).Address(xlA1)
ThisWorkbook.Names.Add Name:=Models(i), _
RefersTo:="=OFFSET(Reference,0,0,counta(Range1:Range2),1)", Visible:=True
Next i
This gets me the range i need, but doesnt create the named range properly. If i go to insert>names>define, the named ranges are created, but they dont relate to the data in any columns. It shows the variable names rather than the cell range the variable represents.
View 2 Replies
View Related
Feb 21, 2009
I am a trainee dermatologist. We undertake allergy patch tests. There is a long list of different patch tests which are selected based on the patients history. I have put each of the types of patch testing on a master sheet. What I would like to be able to do is to have a control button next to each set, and when clicked would add that particular set to a "new patient" worksheet tab. And with every set having its own button, more than one set could be added to a new sheet. In the new patient worksheet id like the sets added with a single row gap between them.
I had tried, and managed to get a single series to work, but then it wouldnt allow me to add the next set, saying that sheet already exists. Ideally finally, id like there to be some way, or message to make sure after printing the new patient worksheet gets deleted.
I hope that all makes sense ! Even if I had a code for a single button that added to a master sheet at the next available row +1 I think I could manipulate the code to suit.
View 9 Replies
View Related
Jan 26, 2007
Am trying to copy 50 worksheets from One workbook, into separate existing files (overwriting previous file) in existing folders; once copied, destination files can not be linked to source file.
I'm able to copy the tabs into new workbooks, in the correct folders, but when trying to perform PasteSpecial in new books, original source file is also pasted over.
The parts of the file name and folder location are cell values located on each sheet.
...
For Each sheet In ThisWorkbook.Worksheets
sheet.Copy
Set workbook = ActiveWorkbook
With workbook.Sheets(1)
.UsedRange.Copy
.UsedRange.PasteSpecial xlPasteValues
.Cells(1).Select
Application.CutCopyMode = False
End With
View 4 Replies
View Related
Dec 20, 2007
Been playing with this for some time and can't quite figure it out. I'm trying to copy a named range and paste special value to another named range of the same size. I recorded a Macro that does what I need, and I'll use if necessary, but thought I'd try to consolidate the code a bit and can't get it to work. The recorded macro is as follows:
Sub PasteRanges()
Application.Goto Reference:="DataCopy30Yr"
Selection.Copy
Application.Goto Reference:="DataPaste30Yr"
ActiveSheet.PasteSpecial Format:=3, Link:=1, DisplayAsIcon:=False, _
IconFileName:=False
End Sub
My attempt to consolidate was this:
Sub PasteRanges()
Range("DataCopy30Yr").Copy Destination: Range("DataPaste30Yr").PasteSpecial (xlPasteValues)
End Sub
I get the Run-time error 1004 Copy method of Range class failed when I try to run this. Again, I can use the longer version with no problem, but in the interest of learning and since I have spent some time not being able to come up with the solution, I thought I'd ask the experts opinions before I gave up on it.
View 6 Replies
View Related
Aug 20, 2006
I did a search for " import text" and found some promising leads, but not exactly what I was looking for. I have tried running macros and looking at the code but don't know how to pass the file names from the the D47:D147 range to VBA(see below). I saw elsewhere that Excel can be told to create a temporary batch file, and that the batch file with the command "copy text1.txt+text2.txt+text3.txt all.txt" for example could be used to merge the 3 text files into a file called all.txt. I don't however know how specify the path where copy starts, to tell the batch file to look in subdirectories or to pass the file into Excel. I've posted this question yesterday to Yahoo Answers http://tinyurl.com/omers and http://tinyurl.com/rfww9 without much luck.
Below is the macro I would like:I have text files whose names are found in the range D47:D147 although without the appended ".txt" extension. The sheets can only contain one name sometimes, but on average 8 to 10, so in the average case only cells D47:D56 would have entries.The text files are found in the say H:Textfiles directory or subdirectories.I would like Excel to find these files, concatenate them with a row between each file, and paste the results into cell K251.Finally, the text import wizard should be used with a space as a delimiter and the last 3 columns (it's sometimes only 2) of the concatenated file, not imported.
View 2 Replies
View Related
May 19, 2009
I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path).
I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the
Windows("xxxx").Activate
command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).
I can use the
ActiveWindow.ActivatePrevious
command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.
I realise this is probably very basic and I've searched the forums but can't find any identical postings.
View 5 Replies
View Related
Aug 13, 2013
If I copy worksheet in Excel, the named ranges are copied too. If I copy in VBA, they are not. Is the only solution to loop thru the named ranges or is there something smarter like some "fullcopy"?
View 2 Replies
View Related
Mar 23, 2007
How can I copy the Named Range definitions from one worksheet to another in the same workbook? In case it matters, the Named Ranges refer to cells in a third worksheet in the same workbook.
View 6 Replies
View Related
Sep 24, 2012
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
View 2 Replies
View Related
Jan 27, 2012
I looking for a macro to look in a list in worksheet "Map_Ref", and take the Range Name of column "A" and copy that range in the corresponding Tab and range as specified in Columns "C" and "D" (i,e. take range name "BB Staff Counts_Tenured" from cell "A2" and copy that range in worksheet "Sheet2" (as specified in cell C2), range "A2" (as specified in cell D2). And so on.
List of worksheet "Map_Ref":
Column AColumn BColumn CColumn DTable/Range Title/Name:
Range in Tab "CMD_1"Copy to Tab:To Range:BB_Staff_Counts_TenuredA126..Q156Sheet2A2Branch_Counts_BBmarketsA35..
C47Sheet2A59Branch_Counts_Chase_SBRM_RegA30..E33
[Code] ........
View 6 Replies
View Related
Dec 11, 2008
I would like to copy and paste two columns from a worksheet to another worksheet simultaneously. I would like to have a macro to do this function.
View 5 Replies
View Related
Feb 10, 2013
I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.
Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.
View 9 Replies
View Related
Jun 2, 2008
Now what I am looking to do is search my spreadsheet for specific criteria and then copy and paste these rows of information to a new sheet.
In my first spreadsheet that I am using as a database, I want to be able to select any entry from the month and copy it to another spreadsheet named for that criteria.
In other words, I want to find every entry for January, copy just that data's rows and paste them to the January spreadsheet, February to February, etc. My date fields are in column A.
I also want to do the same with representatives names found in column B.
This will break down the data for each rep and each month. Using the filter, then copy and pasting would be cumbersome.
View 9 Replies
View Related
Jan 31, 2014
I need to loop through worksheets in a workbook and copy every first cell value(A1) and then paste into a new worksheet.
I have tried various loops. some have copied first value for the first sheet and then pasted in the new sheet. while others have been not so good.
This is the code I have so far and this does not work at all.
Code:
Sub Check()
Dim ws As Worksheet
Dim lr As Long
Dim treg As Worksheet
[Code]......
View 1 Replies
View Related
Jan 27, 2014
I'm using some workbook-scoped named formulas to define some dynamic ranges which will be referred to by numerous worksheets. The named ranges are defined like:
NAME: gTable_costDetailsEquipment
REFERS TO: =globalParameters!$B$5:INDEX(globalParameters!$B$5:$C$1048576,1+countAdjacentNonBlank
(globalParameters!$B$5,"down"),1+countAdjacentNonBlank(globalParameters!$B$5,"right"))
From either of the tabs "Reports" or "DOR_Template" the user can press the large "+" icon to add a report (which copies the template or the last report to a new sheet).
When this Sheet copy takes place, excel is repeating my named formulas - this time it's making LOCAL versions scoped to the newly made worksheet.
I've used this copy sheet trick before and have never had excel create new, locally scoped, named formula for each workbook level name.
I also just recently started using excel 2013, is this a problem with the new version? I've just never seen this problem, usually workbook-level names are NOT duplicated on sheet copy.
View 2 Replies
View Related
Oct 26, 2009
I've been working on a spreadsheet and these forums have been a great help. I'm now at the very last section and, surprise surprise, it's also the hardest!
I'm creating a stock trade recording sheet. I have a userform ask the user to enter a date, a time, the number of stock purchased, and the price of the stock. These are then entered in a new row.
Now what I want to do is have summary cells which say how many stocks were purchased and the total profit made for each day. Since each time is given its own row, I can't know in advance which rows to sum over. I also don't know on which days a trade was made. So a summary cell should only exist if a trade was made that day.
Could I do something like.... check if the date matches then sum over all the values for that date? So if column A has the dates, can I say "Search which rows in column A have this date" then "for those rows, sum column C"?
Also, how would I create a a row for each traded date's summary cell and enter the date in it? I've attached a spreadsheets which manually demonstrates what I want to do (no macros) and a spreadsheet with what I have so far (basic macros).
Any and all help much appreciated, I just need to get my head around creating and dealing with variable ranges. Is that a really advanced task? I don't think this is a one line solution so please bear with me while I make mistakes!
View 14 Replies
View Related
May 21, 2014
I currently have created a database (sheet two) with information including ID # (VH-XXXXX) in Column A and all the necessary information related to that unique Item. What I would like to do is search based on the ID number, have it filter, then copy and paste the row into another worksheet. Is this possible? I am relatively new to VBA and have written codes for copy and pasting rows, but never with an autofulter.
View 3 Replies
View Related
Jun 3, 2014
Untitled.jpg
Untitled2.jpg
I have to edit the following test to have the possibility to insert in the new row,new VALUES. These data are in a different sheet where I'm working but in the same file xls.
[Code] .....
I insert an example of output.
View 2 Replies
View Related
Dec 25, 2012
is it possible to copy from say (A1,A8,A9,A17) to (A1,A2,A3,A4) on another worksheet? Is their a formula for this?
View 3 Replies
View Related
Jun 25, 2014
I do have macro which populates sheets based on given list.
I want to paste all data in newly created sheets from "Template".
I do not want to loop 2 sheets ("DATA" & "Template").
Data must be pasted with format & validation. Validation exists on Template sheet only. No other sheet is referred for validation.
View 2 Replies
View Related
Mar 14, 2013
I am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
View 3 Replies
View Related
May 22, 2007
Is it possible to disable the copy/paste functions on a particular worksheet within a workbook, or failign that, on a complete workbook?
View 9 Replies
View Related
Jun 29, 2006
I want to run a macro that looks thru column F of all my worksheets (in my entire workbook).
If it finds an x then I want it to copy that entire row and paste it into a worksheet called "old" or a new worksheet or a new document in word (it doesn't matter - just whatever is easiest for my little brain to understand).
I should end up with about 40 rows of data in the new sheet.
(I have some code that looks thru it all and colors the cell blue but I just don't know how to get it to copy and paste the entire row into a new worksheet.)
View 9 Replies
View Related
Oct 31, 2006
I am facing problem in copying the contents from same range in different sheets ie suppose cell (C9) from 5 sheets(say) to a new sheet in cell(say) D9
Copy contents from each sheet with bullet..... or anything so that it will differentiate it from the contents of other sheet.
View 6 Replies
View Related
Nov 1, 2006
tried making changes in the following code so as to copy paste only those cells which has any value.but could not succeed
according to the following even if there is no value a cell from a particular sheet it still gives a bullet.
to clear it more.
if there are 3 sheets having information then only 3 bullets with information should appear.
Sub X()
Dim strTemp As String
Dim shtTemp As Worksheet
Dim rngX As Range
Dim lngIndex As Long
For lngIndex = 5 To 10
Set shtTemp = ActiveWorkbook.Worksheets("Day" & lngIndex)
For Each rngX In shtTemp.Range("A1").Cells
strTemp = strTemp & Chr(149) & Chr(32) & rngX.Value & vbLf
Next
Next
Range("Sheet1!E5") = Left(strTemp, Len(strTemp) - 1)
End Sub
View 3 Replies
View Related
Jan 12, 2007
I am unable to copy and paste on a particular worksheet. It is not protected nor are the cells locked. I can copy one or more cell's contents, but as soon as I click into the cell I wish to copy to, the paste icon greys out. Using VBA code to do the same fails at the same point.
View 4 Replies
View Related
Feb 15, 2007
Finding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1()
With Worksheets(1).Range("Product")
Set c = .Find("OK", LookIn:=xlValues)
If Not c Is Nothing Then
firstAddress = c.Address
Do
c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3")
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
End Sub
I also attach the Excel spreadsheet called Product Macro.xls
View 4 Replies
View Related
