Copy And Paste Macro W/o Switching Worksheets
Jul 13, 2006
I'm writing some macros in excel in an effort to transfer over from Lotus 1-2-3 but have hit a major roadbump. The macro is fairly complex and takes a while to run and I'm trying to cut down on the Run Time. As of right now lotus does it about 6x faster. I think a big roadblock here is that in the macro I built in excel when copying and pasting values into another worksheet, the coding has to
1)select the cell to copy
2)switch worksheets
3)select the cell to copy to
4)paste or paste special into that cell
5)switch back to first worksheet
Etc...
for every single value I want to copy over. With lotus it was possible to just copy values to an defined name in another worksheet without leaving the current one. This would greatly decrease runtimes and I was wondering if anyone knew how to code for this.
View 5 Replies
ADVERTISEMENT
May 20, 2009
I'd like to copy/paste from different spreadsheets. The place it will be pasted is specific.
Sub Family1()
Range("A2").Value
Sheets("Black Market").Select
Range("C3:C35").Copy
Sheets("Profiles").Select
Range("B2").PasteSpecial
Sheets("Real Estate").Select
Range("E3:E30").Copy
Sheets("Profiles").PasteSpecial
End Sub
View 2 Replies
View Related
Dec 23, 2011
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
View 9 Replies
View Related
Aug 15, 2012
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
View 5 Replies
View Related
Feb 5, 2010
I need keyboard shortcut for switching through worksheets.
For now, I have this VBA macro and shortcut Ctrl+R:
View 7 Replies
View Related
Mar 30, 2007
I would like my cursor to stay in the same cell when I switch worksheets. If I'm in B40 on worksheet one, and switch to worksheet two I would like the cursor to be in B40.
I'm using very basic excel functions with no scripting at the moment.
View 9 Replies
View Related
Jun 25, 2012
I need a macro to copy the data from A3:B3 to last row in sheet2 and paste the same in last empty row in col.A of sheet3.
View 2 Replies
View Related
Dec 20, 2006
I'd like to copy and paste data between workbooks.....
View 10 Replies
View Related
Jul 26, 2007
I have the following code that I would like to use to create generic estimates for common jobs that happen all the time.
Sub CREATEESTIMATE()
Dim wsEst As Worksheet
Dim wsList As Worksheet
Dim wsData As Worksheet
Dim smallrng As Range
Dim destrng As Range
Set wsEst = Worksheets("Estimate")
Set wsData = Worksheets("Brk-oil-44kv-data")
Set wsList = Worksheets("Estimate List")
lngMax = wsList.Cells(Rows.Count, 1).End(xlUp).Row
For Each Cell In wsList.Range("F2:F" & lngMax)
If Cell.Value = "BR-O-44-RR" Then
Sheets("Estimate").Activate.......................
1) When I run the macro the data that needs to be paste under the Station Maintenance rows does not appear. It just pastes the first section (6 rows of 72 rows).
2) The Task # does not renumber automatically - but with the SAME code it renumbers properly for the CMS Task #.
3) Under CMS it copies everything properly except for data that should be in column I - the data is on the data sheet "Brk-oil-44kv-data".
View 9 Replies
View Related
Sep 1, 2006
I've coded wrong. I get "Run-time error 424: Object required" when I run it.
Dim ws As Worksheet
x = 0
For Each ws In Worksheets
Select Case UCase(wSheet. Name)
Case "SAMPLE RESOLVED", "RESCALLTYPE", "DATA", "SUMMARY"
'Do nothing
Case Else
ws.Range("J22").Copy Destination:=Sheets("Summary").Range("B2").Offset(x, 0)
ws.Range("C3").Copy Destination:=Sheets("Summary").Range("A2").Offset(x, 0)
x = x + 1
End Select
Next ws
View 3 Replies
View Related
Dec 18, 2006
I'm trying to copy range from one worksheet to another. I'm guessing there must be something wrong with my syntax here:
For Count = 2 To 50
If Sheets("sheet1").Range("H" & (Count)) < 0.1 Then
Sheets("sheet3").Range("A" & (next_place), "K" & (next_place)) = Sheets("sheet1").Range("A" & (Count), "K" & (Count))
next_place = next_place + 1
End If
Next Count
View 4 Replies
View Related
Feb 6, 2007
i am trying to create an invoice with the data from one sheet(invoice list1)to copy this and populate an invoice that i have in another workbook(invoice)
i need to generate for however many lines there is in the invoice list the equivalent number of invoices.
ie the data in list will be copied to relevant cells in invoice so
cell A4, A5 FROM (INVOICE LIST1) will go to cell B10, C10 of ("invoice" workbook)
cell E4 and f4 go FROM (INVOICE LIST1) go to cell b11,b12 ("invoice" workbook)
and cell g4(invoivelist1) will go to d12 of "invoivce"
i will attach the workbooks
View 3 Replies
View Related
May 3, 2007
- I have a worksheet (W1) which i have filters
- I have another worksheet (W2) that is formatted for a institutional purpose where i must put the things selected in the W1, but the problem is that: in the W1 i have a cell (A1) with some data but in W2 i have a space composed with one line but with several columns and excel says that he cannot paste the information copied in W1 to put in W2.
there is any way to avoid this problem because at the moment i am making copy paste one by one, and it takes to many time and i would like to copy and paste the information selected by the filter in W1 to paste in W2.
View 9 Replies
View Related
Sep 13, 2007
I want to copy from a MasterSheet and paste into multiple sheets that are already there with out creating new ones.
I need the code to miss the first 5 sheets and then paste to the rest.
I have found this code but not sure how to change it to meet my needs
Sub test()
Dim ws As Worksheet
Dim i As Integer
Set ws = ThisWorkbook.Worksheets("sheet1")
Application.Calculation = xlCalculationManual
Application. ScreenUpdating = False
For i = 1 To 31
Debug.Print i
ws.Copy Sheet1
Next i
End Sub
View 9 Replies
View Related
Oct 12, 2011
I have a workbook with 6 worksheets in, 5 worksheets contain data whilst the 6th I will use as a search worksheet. The 5 data worksheets contain columns A to J which have text entries in.
What I would like to click a button on the search worksheet, lets call it worksheet 1, and for an inputbox to allow the user to enter a text search. The macro would then search for this text in columns A to J and all rows (or rows with data in) on the 5 data worksheets, and if found, copy the entire contents of those rows where the text is found and paste them into worksheet 1, the search sheet.
I have done a forum search and found a few examples of this type of search but not across multiple worksheets, also I found this code that does search across multiple sheets but does not copy and paste:
VB:
Sub Find_Data()
Dim datatoFind
Dim sheetCount As Integer
Dim counter As Integer
[Code]....
View 5 Replies
View Related
Jan 31, 2010
I am working with a workbook that i have created. The workbook has around thirty worksheets all with the starting nave of "DIV". I have a code that will loop throught the wrok book and copy the used range and insert them into a master. However what i need is a code that will loop through the wroksheets and only copy the used range only in columns A:P and starting in row 10 (i have headers from row 1-10). I have columns beyond "P" that has working information for that worksheet and do not want to copy it over to the master.
View 12 Replies
View Related
Dec 1, 2006
My code (with help from this forum) loops through all workbooks, all sheets and all columns OK as I have tested it with message boxes
I need to take the value of Range("C5") from each column of all sheets of all workbooks
and paste it to Range("A4") downwards in Workbook("Loop Folder.xls") . That is, each new value is inserted in the next row of column A.
Sub test4() ' populate analysis sheet
' copies cell("C5") from each column in each sheet in each workbook in a directory
Dim Mypath As Variant
Dim excelfile As Variant
Mypath = "U:September 2006" ' folder where all excel files reside
excelfile = Dir(Mypath & "*.xls")
Application.DisplayAlerts = False
Do While excelfile <> "" ' loop all files
View 7 Replies
View Related
Sep 26, 2007
I am using following code to copy a range from one worksheet to multiple worksheet.
I used both the option to paste the copied content i.e. ActiveSheet.Paste and Selection.PasteSpecial Paste. However in both cases getting error message 'Paste Method Of WorkSheet Class Failed'.
find any error here
Sub CopyList()
Application.CutCopyMode = True
Counter = Sheets.Count
For i = 3 To Counter
Sheets("Summary").Select
View 4 Replies
View Related
Apr 25, 2008
I have developed a template with tabs for Jan thru Dec, and a Template tab that has the report. the VB code copies the file as a new workbook whenever the year changes, creating something linke 07_Reports.xls. It also copies the "Template" to each Jan-ded tab and adds descriptive info to indicate that it is Jan or Feb etc. There are several sheets, and each has 3 or 4 different reports across the columss. each report has a month by month summary at the top,and daily details for each month down below, with each month detail beginning at 100 row intervals and having a row for each day of the month. i use the month names at the top as hyperlinks to jump to that month's detail.
when the file is created the hyperlinks are not copied from the template tab to each Jan-dec tab. Is there a way to have the Template tab use some type of Relative Reference.
If not is there a way to loop through the Template sheet and identify the properties of all the hyperlinks that exist on the sheet. I have over 30 of these Report templates, one for each Water Well that is involed in this project.
so..
1 - can hyperlinks be relative so that they copy and setup on different worksheets when copied.
2 - if not is there a way to read thru the rows/columns of the worksheet and identify which cells in the template have a hyperlink, get the properties of it, and have vb code create that in the crated tab worksheets.
View 3 Replies
View Related
Oct 9, 2009
I have been working on this macro all day and no matter how many different ways I write it I can't seem to get it to finish correctly without giving me an error message. The error messages are different depending on how I write the macro, so what the message says is not important.
I have attached a sample of my work which contains the macro, but I'll post the code below as well. There are two tabs in the workbook. One contains the data("download") and the other is the template("Blank") per say. I need the macro to create a new worksheet using the template for each line of the data ("download")until it gets to the "finalrow." It names the worksheets the value of D3 currently, but I'd like to figure out how to name the worksheets by C3. c3 contains the names of customers, and is duplicated for each product they have purchased. I'd just like to attach a number after the name if it is a duplicate. i.e. Adam, Adam1, Adam2, Adam3 for all "Adam"s.
Look into the code and see if that makes sense. if not, feel free to ask questions.
View 14 Replies
View Related
Jun 2, 2009
I'm alittle new to excel and MrExcel website. I have a spreadsheet that im trying to get a formula to work as below. If anyone knows how to get this to work please help! Thank you.
My spreasheet has the following:
Sheet1:
Column B Column G
1 test 1
2 center 2
3 school 4
Sheet2:
Column B Column G
1 work blank
2 school blank
3 home blank
I'm trying to find the value from sheet2 cell B2 (school) in sheet1 column B and then when it finds that, I need it to copy the data from the Corresponding sheet1 Column G cell to sheet2 Column G cell.
View 9 Replies
View Related
Jan 26, 2007
Am trying to copy 50 worksheets from One workbook, into separate existing files (overwriting previous file) in existing folders; once copied, destination files can not be linked to source file.
I'm able to copy the tabs into new workbooks, in the correct folders, but when trying to perform PasteSpecial in new books, original source file is also pasted over.
The parts of the file name and folder location are cell values located on each sheet.
...
For Each sheet In ThisWorkbook.Worksheets
sheet.Copy
Set workbook = ActiveWorkbook
With workbook.Sheets(1)
.UsedRange.Copy
.UsedRange.PasteSpecial xlPasteValues
.Cells(1).Select
Application.CutCopyMode = False
End With
View 4 Replies
View Related
Mar 8, 2007
I am trying to create a macro to copy multiple sheets to a single named worksheet, all within the same workbook. The code below works, except I want to copy only the data (no formulas). Can I add code to paste values, or do I need to start over?
Public Sub CopyandPaste()
Dim ws As Worksheet
Worksheets("Summary").UsedRange.Delete
For Each ws In Worksheets
If ws.Name <> "Summary" Then
ws.Range("a2"). CurrentRegion.Copy _
Destination:=Worksheets("Summary").Range("A65536").End(xlUp)
End If
Next ws
End Sub
View 4 Replies
View Related
May 21, 2008
I want to take values from several worksheets within one workbook and put them into a list ie.. a workbook with 200 worksheets each one a different invoice. Each invoice has an invoice number, po number, supplier, and total. I want to create a worksheet that will list the above information from each worksheet.
View 5 Replies
View Related
Feb 28, 2013
I want to write a macro that will copy data from all worksheets of a specified workbook and copy them into a new workbook.
To give some detail, I receive a report each morning containing failed deliveries. I also export a list of failed deliveries from a system (SAP). These reports rarely match so I must compare the two daily. I do this using INDEX and MATCH functions but now my boss wants all the data in a single report so I would like to harness the might of vba to consolodate all the data in one workbook.
The lists of failed deliveries are contained in worksheets marked mon, tue, wed... so I need to search all worksheets for all delivery numbers and copy all of the data into a new book. This becomes complicated because on Monday there is only one tab marked mon, on tuesday there are two (mon & tue), one wednesday there are three and so on.
I have started on some code but I am getting nowhere fast. I have managed to muster an input box which asks for a date (this will be used to search the file path for a file named "failed deliveries & "mm/mm/yyy")
View 3 Replies
View Related
Dec 2, 2013
Recently, when trying to copy and paste portions of excel worksheets, I've been getting the message: The picture is too large and will be truncated.
I have copied and pasted this same way for years and the problem has just arisen over the past month. An excel issue or possibly something else and just getting the message with Excel since it's the software I'm using 90% of every day?
My files are stored on a network drive, not my hard drive.
View 2 Replies
View Related
Apr 29, 2014
I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)
I am unable to write the code myself as I have never worked on VBA and am only a beginner.
Part I:
The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.
Part II:
Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.
Also some of the rows and columns are merged.
View 9 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Apr 28, 2007
I'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.
View 4 Replies
View Related
