The following code fills down column B for rows 3 to 110, regardless of the inserted "If Not IsEmply' statement. I've got formulas in Column A from row 3 to 110, but visible values in rows 3-5. I want it to fill the for the visible values only.
View 2 RepliesI have a daily report that gives a percentage based on what is typed into the "Supplier" and "Total Sales" columns but I'm having trouble writing the following formulas since my excel knowledge is relatively low.
1. Where a cell in the "Supplier" column says anything but "Den", "Burrowed" or "Studio Nyx" I need the "60%" and "40%" columns filled with the relevant formula (=B11*60% for example) and the "100%" column blank.
2. Additionally, if the cell contains "Den", "Burrowed" or "Studio Nyx" I need the "100%" column filled and the "60%" and "40%" blank.
If you want to create a FOR...NEXT loop for values that are present, how would you go about it? Sometimes you may have 1,2,6,8,12,13 and the next 2,3,5,6,7,10,11,14.
It may be a number between a certain range, but the sequence and step will change every time (for trying to get a Auto-filter to cull a list based on descriptor)
I have 2 columns with approximately 200K lines of data. There are only 84 and 823 unique values in each column respectively. On my report.
Column A is essentially a customer list, column B is a product list. I am trying to find out how many unique/individual products a customer orders. I have a separate column that has the customers in it (Column G), and in Column H, I want it to count the unique products ordered by customer.
I changed some of the data, but essentially what I attached is what I need.
per attached I'm trying to establish that values in one sheet are present in another. The MATCH function isn't returning anything.
View 5 Replies View RelatedI am trying to copy worksheets from a master workbook to numerous other destination workbooks. I would like the code to check if the destination workbooks already contain any of the sheets being copied and if this is the case, miss out that sheet and move on to the next. Currently, if duplicate sheets are present, a second sheet is created and copied to the destination file.
VB:
Sub CopyTrend()
Dim Filename1, sFileNameAndPath, sThisWorkbookName As String
[Code].....
I have a dropdown list in A1 of sheet1 that is populated by a dynamic named range beginning on A1 of sheet2. I also have a dynamic named range beginning on C1 of sheet2.
I want to create an IF/THEN function that checks if the value currently present in cell A1/sheet1 is also in the range at C1/sheet2. I have achieved this using lengthy OR() functions, but I want to get away from this.
In sheet1 i have a Listbox(Controlbox), which stores data of 100 names. Now in the D column i need to type the Name. So i would like to have a code which can pull the list box below the Cell I am Typing and it has to match the strings i type to list box(i.e, Pull data from the Listbox as i type the character in a cell)
So here i need 2 Modules
1- Which will pull the data from the listbox
2 - which will bring the list box below any cell which i am typing
I have a slight conundrum that goes as follows:
If in a given row, the cell in column A is empty, but the cells in columns B and C have values--would it be possible to automatically fill in the empty cell with the same value of another rows column A cell, if both rows share the same value (nb: not case sensitive) in the column B and C cells.
For example:
If one row, say Row 44, contained the following:
Column A Cell =
Column B Cell = sunday
Column C Cell = dog
and another row, say Row 10023, contained:
Column A Cell = Walk
Column B Cell = Sunday
Column C Cell = Dog
How would I go about automatically filling in Row 44's column A cell with the value "Walk", as both rows columns B and C cells match up.
I should mention that I am dealing with a sheet with over 30'000 rows, so it would be incredibly time consuming to find matches and input the missing value directly.
Need to search a sheet and find cells that contain the text "Requirement". If found then i want that cell to become blank.
example
so in sheet1,
i have a number of columns and a number of rows
in cell A3 the value is - " there are requirements"
in cell F23, the value is -"the Requirement is"
since both cells have the word requirement, I want these cells to become blank.
Need to search a sheet and find cells that contain the text "."
Want all cells that don't contain a "." (dot) to be erased from the sheet
Example : so in sheet1,
I have a number of columns and a number of rows
in cell A3 the value is - " there are requirements."
in cell F23, the value is -"the Requirement is."
since both cells have "." ( dot) , I want these cells to remain in the sheet, but the rest of the cells should become blank.
i am trying to find the time difference between two cells and present the date in a third cell. The data in the cells are in a non standard date/time and i need to create a special format i think. The cells look like this.
fldcollected fldaccepted Type Time between being received by database and eccepted
2013-11-06 15:59:29.1002013-11-07 08:41:12.000PSTN
I am trying to apply icon conditional formatting in a cell. The cell contains the following formula: =VLOOKUP(D20,'owssvr(1)'!O:W,9,FALSE The formula results in a "2", "1", "0" or "-1" in the cell. The icon conditional formatting is not working at all (no icon appears). I have the conditional formatting setup as numbers Green 2, Yellow 1,0 etc based on value. If I delete the formula and just type in any of those numbers directly, it works. I have changed my cells to "number" and it still does not work.
View 3 Replies View RelatedProblem Designing "new customer" form, a textbox(forename) in the
form has the Control source of "B3" (an empty space in my Customer
database). When the form is run and the forname is typed in the box, it
fair enough appears in the Database sheet (in B3).
However, then when opening the form again and typing over the forename
just inserted it will ofcourse overwrite it (B3 is replaced). Any ideas how i can input
code into the sub linked to the textbox so that it checks the control
source and moves down if the source is empty(code checks B3 for text, moves to B4) then the next one (B4 is checked, moved to B5).
Dim topCel As Range, bottomCel As Range, _
sourceRange As Range, targetRange As Range
Set topCel = Range("B2")
Set bottomCel = Range("B65536").End(xlUp)
If topCel.Row > bottomCel.Row Then End
Set sourceRange = Range(topCel, bottomCel)
Set targetRange = Range("B3")
I have two worksheets, one which contains a list of workstation numbers, and another which contains all of the workstation numbers and additional information on the workstations in the company.
I want to remove all workstation numbers and their information which are not present on the first list from the second list.
In the first w.orksheet each workstation number is in a seperate row, and in column one (seperate cells).
In the second worksheet, each workstation number and its corresponding information is on the same row, and each different workstation is on a seperate row with its information.
I'm trying to set up a "simple" calculator for a co-worker who sells memberships at a country club. The purpose of the calculator is to help show an individual why it makes financial sense to join now (mid-year) and have monthly dues waived for some number of months as opposed to waiting until December and joining right before the membership deposit goes up in January and be required to pay dues from day one.
I'm not exactly sure how to build an NPV formula for the 'join later' column (cell C11). The assumption I am using is that the prospective member would take his money and invest it at the assumed rate and then use those funds to join and pay dues at the later dates. I've got a formula in there right now, but it is only giving me their net out of pocket expense, not the net present value of those funds.
here is what I have so far: ....
How can you calculate the present value of a negative value in excel?
View 2 Replies View RelatedI have a list of sales which is mixed with Dollars and Euros in the same column. I want a formula which will detect which currency is which and make 2 seperate totals for the corresponding amount. I have the currency signs in the same column but seperate to the amounts.
View 9 Replies View RelatedI've created a spreadsheet that I use to calculate weights of steel members for my job for estimate purposes. I'm trying to figure out how to save some time by not having to enter/copy/paste formulas every time I do takeoff for an estimate.
The bold green cells in column K are always linked to the yellow "Part Heading" above in Column A. As I do my estimates, I copy and paste a "Part Heading" with a "PL/Member" formula below for the next piece I'm working on. Every time I paste a new "Part Heading" with a "PL/Member" formula, I must change the formula in Column K to link to the next cell up in column A with a value present. In the screen shot, cell K/90-K/96 are linked to cell A/89. Cell K/83-K/87 are dependent cell A/82; K/74-K/80 are dependent on cell A/73, and so forth. Since each "Part" varies on total number of "Members", I can't seem to write a formula that will stick when copying and pasting.
My question is: Is there a way that I can automatically link each cell in Column K to the next cell up in Column A with a value present?
how to use COUNTIF to count up the number of times something appears. What I want to do is add up values if an H is present in the cell with the value eg. if 3 cells contained:
H, 3.5
7.5
H, 3
...then 6.5 would be returned.
I have a list of dates in column A which are in order but non consecutive. I am creating a new table with all consecutive dates. I need a formula to check whether a date is in column A and then give out a number in the corresponding column to the right. I am able to use Vlookup for this but if the date is not present in the first coumn it returns an N/A response. Is there a way of returning zero if the date is not present?
View 5 Replies View RelatedI have a command button that is linked to a sub procedure that sends emails by sales rep. When the information is separated by region I want to disable this option. So I have the following sheets that may or may not be present: "Southeast", "Midatlantic", "South East", "North East", "Central West" "Southwest" and "Mid Central". If one of these sheets is present in the work book I would like a simple:
Code:
msgbox "You cannot distribute email whens sales have been grouped by regions", vbcritical
Not sure of the logic I need to include for this specific case.
I'm currently trying to sum across a row only if certain text is present. So, if A1 has CT8 and A2 has 5 and A3 has CT5, I want to just sum the cells with CT in them. I've already worked out how to strip the CT from the numbers in the sum, but not how to specifically only sum if CT is present. And of course, the sheet uses other letter/number combinations that need to be separately summed.
I would like to do in the column next to it is where there is a date add 45 days, and where the cell is blank just leave the cell next to it blank.
I've have tried several methods, as below and I either get an error message or the cell doesn't return what I would expect.
=IF(C3:C13>"",45,0)
=IF(ISNUMBER(C3:C13)+45
=IF(C3:C13,0,45)
Which formula should I use to look for the present value factor if I have the interest rate and the # of periods. attached file.
why match turn out NA but data is there ,I'm not very good in this or this formula don't really work,
View 5 Replies View RelatedI have to use data tables to calculate Net Present Value (NPV) by altering specific variables.
How to use the data tables function under the what-if analysis.
My sheet and calculations are all set up
But for the life of me i cant figure out how im going to tell excel that im changing for example wage costs and not fixed assets when trying to asses the NPV.
Ive done it manually by altering the figures on the Inputs and Data Sheet.
My NPV calculation is on the Workings and calculations sheet.
The data tables i have done manually are on the Inputs and Data sheet.
I am looking for a way to ensure that all the leading zeros in one column are present without having to format the column cell be cell. Is this possible?
I have a spreadsheet with 6 sheets. There are 3 sheets that have information regarding the soil, geology and drift deposits of an area. The other 3 sheets relate to these sheets to display the information for each area. The way that the spreadhseet is set out pretty much explains what i am trying to archive. Basically I want each sheet to say whether or not the rock, soil or drift type is present for each area. And if it is present to calculate the percentage of total area. I have created a pivot table for each of the info spreadsheets - but need it to look like the "table" sheets, because it needs to be added to a report. Any questions and i'll try and answer them , but it's quite difficult to explain in words what i am trying to achive.
View 4 Replies View RelatedROW 1 - list of headings
ROW 2 - blank cells that may contain an "X"
At the end of Row 2 I want it to find out which is the last column with an "X" in it, i.e. F2, and return the title of that column, i.e. F1.