I have a list of dates in column A which are in order but non consecutive. I am creating a new table with all consecutive dates. I need a formula to check whether a date is in column A and then give out a number in the corresponding column to the right. I am able to use Vlookup for this but if the date is not present in the first coumn it returns an N/A response. Is there a way of returning zero if the date is not present?
View 5 RepliesThe following code fills down column B for rows 3 to 110, regardless of the inserted "If Not IsEmply' statement. I've got formulas in Column A from row 3 to 110, but visible values in rows 3-5. I want it to fill the for the visible values only.
View 2 Replies View RelatedI would like to do in the column next to it is where there is a date add 45 days, and where the cell is blank just leave the cell next to it blank.
I've have tried several methods, as below and I either get an error message or the cell doesn't return what I would expect.
=IF(C3:C13>"",45,0)
=IF(ISNUMBER(C3:C13)+45
=IF(C3:C13,0,45)
I have done a VBA course but am struggling to apply it to my situation. What I want to do is on one spreadsheet, I have a column with "shift, date, grade 1, grade 3, quarantine" in it, and in the cells next to it I want an operator to enter either "day" or "night" next to shift, and the date. Next to the others I want the total weight of the appropriate product made in that time. The spreadsheet I will be feeding off is quite big with a lot of information in it. Down the left hand side is the roll number (we make rollstock). Further along on that same row will be the date, the weight, and a grading (putting it into grade 1, 3, quarantine etc). Our shifts run from 7am to 6:59pm, and 7pm to 6:59am. Which shift the roll comes under is determined by it's end time (also in that row). So basically, I need VBA to say sum up all of column [weights] if column [date] = [date cell in working spreadsheet] and if working spreadsheet says day then column [roll end time] =7:00-18:59 and if working spreadsheet says night then column [roll end time] =19:00-6:59 and also if column [grade] = [grade cell in working spreadsheet] ....
Oh, also on the feed spreadsheet i have a column that i put in a little code date, "AP04" for 4th of april kind of thing, rolls being made before 6:59am on the 5th of april being put into the 5th april as they need to be counted under 4th april as they are 4th april night shift (even though the date will stay 5th april)...
I am wanting to calculate total time in days, months and years from a date to present. What is the best formula and how do I format the cell to display, days, months and years from a date format like dd/mmm/yyyy?
View 9 Replies View RelatedI have cells within a column that could contain both text and dates. When a date is entered - the activity is complete. I want the cell color to automatically turn green when a date is entered. Conditional formatting seems to use ranges, or today's date, or > than and < than... and I want the cell the turn green when any date is entered. I haven't been able to find either vba code or an excel formula that will work.
View 3 Replies View RelatedI have two tabs in a workbook named "Dashboard and Medicine details"
I need my dashboard to show what are the medicines will expiry in next month.
My Medicine details tab contails medicine details along with its expiry date. If the expiry date of a medicine falls in next month, then it should be displayed in my dashboard.
See the sample attached will give you a clear objective.
Tablet sample.xlsx
i am trying to find the time difference between two cells and present the date in a third cell. The data in the cells are in a non standard date/time and i need to create a special format i think. The cells look like this.
fldcollected fldaccepted Type Time between being received by database and eccepted
2013-11-06 15:59:29.1002013-11-07 08:41:12.000PSTN
I'm currently using an IFERROR, VLOOKUP formula to display an availability date for a product.
Atm, it reads some like this
I inserted the Date & Time picker Control into my worksheet. I have it linked to a cell. When I change the date, the new date goes into the cell, but it does not appear to be a "date" . The date formulas that use that cell do not evaluate properly. It looks different than when I type a date directly in to the cell (it is left justified). I tried formatting the cell as a date and the format property of the control is set to shortDate.
View 2 Replies View RelatedThe message box in the Standard module procedure returns 00:00:06.
Standard Module
Code:
Sub New33()
Dim clsCampaign As CCampaign
Set clsCampaign = New CCampaign
clsCampaign.MailCode = "AWSXBETC"
[Code]....
Code:
Option Explicit
Public MailCode As String
Public LandDate As Date
Public MailDate As Date
Public FirstPanel As Date
Public FinalPanel As Date
how to write an excel workbook function that will return last friday's date?
For example: If Today is 2/12/2008, it will return 2/8/2008 as the date
I am trying to set up a query to search a date range within a table in one sheet based upon a more narrow date range in a second sheet AND return a simple count, median currency value or value based upon a ratio (see attachment).
Note: the Sale Price, List Price and Supply values will be based upon the filtered date range (each quarter) and return a value based upon that range. The Sale Price and List Price also need to be a median within each quarter value so I can chart the data.
Help.pdf
Here is what I need to return:
Num Sales - simple count from each quarter
Num Listings - simple count from each quarter
Sales Price - median value within each queried date range
List Price - median value within each queried date range
Supply - numeric value based upon absorption rate, supply = listings each quarter / absorption rate (absorption rate = sales each quarter / months each quarter)
i have a column in a spreadsheet that stores a date and another column that i want to store a date category. I want the "date category" column to return the date from the "date" column as: eg Jan 09 (if the date is eg 24/01/09)
View 2 Replies View RelatedI have 2 tables where I need to pull data from one table into the other.
Table 1 - pull data here
A
Site
B
Begin Date
C
End Date
Rate
[Code]...
For example: site 77 in table 1, I need to pull whatever rate is shown for site 77 in table 2 for the date range specified on table 1. So the correct answer for the first row site 77 in column E would be .02. Notice there is a problem...mainly the dates do not match exactly. I just need the rate the applies for the majority of the time.
Another example. For table 1, site 174 from 2/11/11 to 2/22/12, the correct answer in column E (pulled from table 2) would be .02, even though Column D shows .00.
I have a spreadsheet with 2 worksheets within it. These are simply called sheet 1 and sheet 2.
On sheet 2 I have cell A1 containing =(TODAY())
Also on Sheet 2 I have cells A28 to A39 containing Month names and cells B28 to B39 containing values. Like this
January 1000.00
February 1000.00
March 2500.00
April 1250.00
May 1750.00
June 2200.00
etc
How can I return the sum of these values into Sheet 1 B18 based on the date. That is to say that I want to add up the sum of Jan, Feb, Mar, Apr, May up to and including callcualtaions made on 31st May but as soon as the date goes past 1st Jun I'd want to include June as well and so on.
I have a bit of code (See below) which basically looks at a list of data in rows 10:99 and then finds a date that is between cells c1 and b1. If there is one the it puts that date in if not it leaves cell blank.
[Code] .....
The problem I have now found is that is the dates in the sheet TR rows 10:99 and one of the dates is outside the range so for instance if the range set by c1 and b1 is 10/3/14 - 20/3/14 and in TR there are dates:
12/3/14
08/3/14
it wont return anything but if the dates are
12/3/14
08/3/14
15/3/14
it will return 15/3/14.
Is there anyway that I can change it so it wont return 0 if the last one is outside the range.
Take the displayed date from a cell, in this case formatted as yyyymmdd, and simply display the date as plain text, not converted to the 1900 date system. For example, I have a date cell that reads 20080610, but everything I have tried returns 39609. But I want it to return 20080610 in plain text so that I can use RIGHT and LEFT functions to extract the year, month and day.
View 2 Replies View RelatedI need an excel function to return the earliest and latest date for a particular/unique ID.
For example: In my sample workbook, the earliest date for all the columns with ID = 1 should return 11/1/2001 and the latest date should be 12/2/2011. If all the dates for a particular ID are the same, it should just return that date. For example, for ID = 2, all dates are 5/5/2010 so the earliest and latest dates should equal 5/5/2010. The earliest and latest dates have to be for each unique ID.
I have in my 'Daily' sheet I9 which needs a formula to look at the date in C9 and the scan range 'Weeks' F6:AN41 and find the cell with the matching date and then whatever text is in Row 2 of the column the date was in will be returned.
View 2 Replies View RelatedI have a spreadsheet that has amortization tables for several loans. I am trying to add a summary tab that will pull the next due date on each loan. Some of the loans are behind so I can't use a >today() function. I have been trying the following:
=MIN(IF(AND(ISBLANK(Smith!A:A),NOT(ISBLANK(Smith!B:B))),Smith!B:B))
Column A is date payment is actually made, and column B is due date, so I want to return the first column B that has nothing in column A.
I have an Excel spreadsheet (XP - 2007) listing Job Nos. in the first column, with several columns of Station assignments and dates.
Both planned dates and actual dates are included, adjacent to each other. The dates are not necessarily in a straight ascending or descending order. Separate arrays exist for: Plan Nametags, Actual Nametags, Plan Dates, Actual Dates.
Example:
Job No.Sta1 PlanSta1 ActSta2 PlanSta2 ActSta3 PlanSta3 Act1A10001-Feb-101-Feb-106-Feb-106-Feb-101-Mar-101A100116-Feb-1016-Feb-1019-Feb-1022-Feb-105-Mar-101A100225-Feb-1025-Feb-102-Mar-104-Mar-1010-Mar-10@
@
I need to capture two pieces of information for each Job No. on a daily basis:
1- The 'Planned' Station for the build, based on a match of the 'Plan' date fields to a pre-populated 'Report Date'.
I've been able to do this (using INDEX-MATCH function).
2- The 'Actual' Station location for the build, based on the Maximum 'Actual' date entry in the row for each build.
(In the example above, Job# 1A1001 would have an 'Actual' location of 'Sta2 Act'...)
I need to figure out how to accomplish step (2) above. I've made several attempts with INDEX-MATCH and LOOKUP functions, without success.
I've posted this question in another site http://en.allexperts.com/q/Excel-105...xExp_72253.htm , but i haven't gotten any answer. I'm attaching an example of the file to show an idea of what i'd like to do, please check first. As you can see, i have a Due Date and Priority columns. The Due Date column has a formula, that when i choose the Priority level, it calculates the Due Date from the current date and auto populates in the cell. The problem is, when i open the file the next day, and insert another Priority level, it updates everything even the previous Due Date entry. This is the formula i have in place for the Due Date:
=(TODAY())+SMALL(IF(WEEKDAY((TODAY())-1+ROW(INDIRECT("1:"&(VLOOKUP((B3),{"Urgent",1;"High",14;"Low",21},2,0))+ ROUND(30*((VLOOKUP((B3),{"Urgent",1;"High",14;"Low",21},2,0))/30),0))))<6,ROW(INDIRECT("1:"&(VLOOKUP((B3),{"Urgent",1;"High",14;"Low",21},2,0))+ROUND(30*((VLOOKUP((B3),{"Urgent",1;"High",14;"Low",21},2,0))/30),0)))),(VLOOKUP((B3),{"Urgent",1;"High",14;"Low",21},2,0)))
Is there a way to make up a vb macro to be able to make the Due Date output static, without affecting the formula?
trying to get a specific value to appear if the value falls within two dates in which it was posted.
I have the following data
1/1/2014 in Cell AB2
$1000 in cell M3
1/1/2014 in cell P3
12/1/2014 in cell Q3.
What I'm trying to do, if Value 1/1/2014 AB2 falls between 1/1/2014(P3) and 12/1/2014 (q3), then I want it to return $1000 (M3), if it does not, then to post 0 or blank.
I am using Excel 2003. I have attached a data file here. getting the values in Q3, R3 and S3.
Scenario:
Q1 has the number = 1. So I want the cell Q3 to return 2/11/2013 as that is the cell corresponding to the Item1 (value specified in P3) with the value 1(value specified in Q1) in the cell. Basically, I need the date corresponding to cell which has the value of Q1 for the value of P3.
Similarly, R2 must have the value 2/12/2013 and S3 must have the value 2/14/2013 returned.
I'm trying to set up a "simple" calculator for a co-worker who sells memberships at a country club. The purpose of the calculator is to help show an individual why it makes financial sense to join now (mid-year) and have monthly dues waived for some number of months as opposed to waiting until December and joining right before the membership deposit goes up in January and be required to pay dues from day one.
I'm not exactly sure how to build an NPV formula for the 'join later' column (cell C11). The assumption I am using is that the prospective member would take his money and invest it at the assumed rate and then use those funds to join and pay dues at the later dates. I've got a formula in there right now, but it is only giving me their net out of pocket expense, not the net present value of those funds.
here is what I have so far: ....
How can you calculate the present value of a negative value in excel?
View 2 Replies View RelatedI have a list of sales which is mixed with Dollars and Euros in the same column. I want a formula which will detect which currency is which and make 2 seperate totals for the corresponding amount. I have the currency signs in the same column but seperate to the amounts.
View 9 Replies View RelatedI've created a spreadsheet that I use to calculate weights of steel members for my job for estimate purposes. I'm trying to figure out how to save some time by not having to enter/copy/paste formulas every time I do takeoff for an estimate.
The bold green cells in column K are always linked to the yellow "Part Heading" above in Column A. As I do my estimates, I copy and paste a "Part Heading" with a "PL/Member" formula below for the next piece I'm working on. Every time I paste a new "Part Heading" with a "PL/Member" formula, I must change the formula in Column K to link to the next cell up in column A with a value present. In the screen shot, cell K/90-K/96 are linked to cell A/89. Cell K/83-K/87 are dependent cell A/82; K/74-K/80 are dependent on cell A/73, and so forth. Since each "Part" varies on total number of "Members", I can't seem to write a formula that will stick when copying and pasting.
My question is: Is there a way that I can automatically link each cell in Column K to the next cell up in Column A with a value present?
how to use COUNTIF to count up the number of times something appears. What I want to do is add up values if an H is present in the cell with the value eg. if 3 cells contained:
H, 3.5
7.5
H, 3
...then 6.5 would be returned.