I want to press a commandbutton and fillacrosssheets but I only want to fill the values, no formatting, no formulas.
The following code works, but carries over the formulas and values.
I tried changing xlFillWithContents constant but without success.
Private Sub CommandButton1_Click()
Dim msg As Integer
Dim ws As Variant
msg = MsgBox("You are about to copy over the existing cells in columns D through P of the Bill Of Materials. Do you want to continue?", vbYesNo + vbQuestion, "Paste Cells")
If msg = 6 Then
ws = Array("Bill of Materials-2", "Admin")
Sheets(ws).FillAcrossSheets _
Worksheets("Bill of Materials-2").Range("D20:BottomLineC"), Type:=xlFillWithContents
End If
If msg = 7 Then
Exit Sub
End If
Application.CutCopyMode = False
Range("A1").Select
End Sub
I HAVE A SHEET WHERE USER ENTERS DATA, AND WHEN USER ENVOKES MACRO, THE SAID DATA IS COPIED TO A 2ND SHEET WHERE IT IS STORED. NOW PROBLEM IS THAT IT COPIES DATA OVER PREVIOUS DATA, BECUASE THE REFRENCE IS NOT DYNAMIC. WHAT I NEED THAT THE DATA IS COPIES EVERY TIME TO THE NEXT ROW,
I'm trying to copy the non blank cells in an area ("B120:K239"). and special paste (values only) to the next blank row of the actual work area (3 pages) within the worksheet. The area that this needs to paste to is between("B10:K29, B44:K63, B78:K97"). Problem is that if there are more rows to be copied and pasted then there are open rows on the first sheet it gives an error due to the rows outside those areas having different formats (merged cells and that)
Question: Is there anyway to special paste between ranges? I've tried to hide the inbetween rows and that still doesn't work. Could it be possible to add something to this code to ignore hidden rows or to only paste to visible rows?
Sub Special_Paste () Application. ScreenUpdating = False With Range("B119") . AutoFilter Field:=2, Criteria1:="<>" With Range("B120:K239") Application.CutCopyMode = False .Copy With Range("30:43") .EntireRow.Hidden = True With Range("64:77") .EntireRow.Hidden = True Dim NextRow As Range Set NextRow = Range("B97").End(xlUp).Offset(1, 0)...............
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB" (2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB". (3) then automatically run a recorded macro named "BoldFirstName"
I've attached a workbook which contains two sheets: PAYM DEVICE_PAYM
Data is updated on DEVICE_PAYM each day with the figures I need located in column "AN". I need to be able to copy the data from "AN" and paste it into a column on the PAYM sheet. The destination column on the PAYM sheet needs to be specified by inputting a specific date - ideally, I would like to use the calendar Add-In as part of this process. I've already input some code for the calendar but am unable to develop this further so that it finds the correct date column and pastes the data across from the other sheet.
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
I am successfully opening a .csv file using a variable value stored in a named range in my Main file (the variable includes the directory and path). I copy data from the .csv file to the Main file then I need to close the .csv file without saving but I want to do that by using the
Windows("xxxx").Activate
command where "xxxx" is the namedrange in my Main file which stores the .csv filename (without the directory and path prefix).
I can use the
ActiveWindow.ActivatePrevious
command but if I have another workbook open, this one closes instead of the .csv file I opened from the macro.
I realise this is probably very basic and I've searched the forums but can't find any identical postings.
I have a frame (Frame1) on a userform added using Microsoft Forms 2.0 Frame. I have added option buttons to the frame named OptionButton1 thru OptionButton4. I am trying to add code where certain cells are copied and pasted depending on which optbutton is selected. I tried the following code but because the option button is a frame object it doesn't seem to trigger the event.
Private Sub OptionButton1_Click()
'copy level 1 If Me.OptionButton1 = True Then Worksheets("Sheet1").Range("G10:G32").Copy Worksheets("Sheet1").Select Worksheets("Sheet1").Range("C10:C32").Select Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _ xlNone, SkipBlanks:=False, Transpose:=False End If
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to: 1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
By using a macro on the attached report I like to copy the row values named "Section Total" in red and and paste them over the values starting with "Aged Debt" in blue (the rest of the wording cahanges every month so "Aged Debt" is the key word for that row).
I paste cell information into cells already formatted to have certain colored backgrounds, ect. However, upon pasting the cell format from the copied cell is obviously applied.
Is there a way of locking the cell formatting so that I can paste information from a different cell, but the font/bground colors stay the same?
How do I adjust this formula so it copies & paste special values rather than copying formatting etc? I am very new to this and I have looked at other examples but have found it hard to adjust my code using those examples.
VB: Sub PrepayjournalKW() ' ' PrepayjournalKW Macro ' Range("A6", Range("A" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("A1") Range("B6", Range("B" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("C1") Range("AB6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("D1") Range("AF6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("E1") End Sub
I'm downloading a tone of financial data from a database and without fail there are always a few odd numbers over time that are either wrong or that I want to through out of my charts/analysis. But I don't want to change them directly in the sheet that I use the code to download straight from the database since I can just click update and the codes refresh the latest data into the format I need. Basically once I hit refresh and download the data into the coded worksheet template I want a macro that lets me pick a tab or multiple tabs and copy and past special value the data into a new worksheet where I can manipulate the data without screwing up the code.
Tried all day to find a way of selecting text ( from several cells) on one sheet and then having it pasted into the textbox on another sheet. I did originally paste the text to a cell but it makes the row's vary in size depending on the copied text and gets a bit annoying. Seems to be This is the paste to Cell code
I need to automatically copy cell IR18 value to cell JT18. I've been searching the forum for some code and I came up with something that only partially works for me: