Copy Range As Paste As Values Based On UserForm Option Button Choice
Nov 3, 2009
I have a frame (Frame1) on a userform added using Microsoft Forms 2.0 Frame. I have added option buttons to the frame named OptionButton1 thru OptionButton4. I am trying to add code where certain cells are copied and pasted depending on which optbutton is selected. I tried the following code but because the option button is a frame object it doesn't seem to trigger the event.
Private Sub OptionButton1_Click()
'copy level 1
If Me.OptionButton1 = True Then
Worksheets("Sheet1").Range("G10:G32").Copy
Worksheets("Sheet1").Select
Worksheets("Sheet1").Range("C10:C32").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
End If
Below is the macro code in which the code is segregating the data page wise i want the below changes:
> macro should copy and paste only values with the option skip blanks.
Private Sub CommandButton1_Click() Dim j As Long 'Setup the loop to loop through the Areas For j = 1 To Columns(1).SpecialCells(2).Areas.Count 'Add a new WorkSheet
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
I have two option buttons on a user form, one for a temperature of <250 & one for a temperature >250. I want the option button >250 to be greyed out or have it so that you cannot choose it & option button <250 selected if a certain criteria in a list box is selected. The list box is called Valve_Model & the criteria i want it to work on is if the valve model HPBV Soft is selected & HPBV Soft AC.
Sheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
I have a userform that I use to add a new record to a csv sheet.
In my workbook I have a table with the same format that my userForm has. What I am looking to do is copy the values from my lookup table on my sample sheet and past them in my add userform in the correct corresponding cells. I have been trying to make the code work for some time now with no luck.
With the use of the option buttons,the page needs to made visible or invisible.
Example: on Page one, i have placed radio buttons as page2,Page3&page4.
By default only page 1 should be visible and when we select radio button page2, page2 should become visible or else it should be invisible,when we select radio button page3, page3 should become visible or else should remain invisible.
I have userform in excel which asks user to enter user id and password. I want a to have "Remember Me" check button on my userform which will remember user details and he wouldn't have to enter user id and password again and again.
I'm trying to use option buttons to create a text entry in an adjacent cell. Selecting Option Button 1 puts "GPM" in cell F23. Selecting Option Button 1 puts "lbm/hr" in cell F23 (The option buttons are from the control toolbox)
I receive ""Run-time error '424': Object Required"" and first line is highlighted- here is copy of
Sub FlowUnits() If OptionButton1.Value = True Then Sheets("Main Screen").Range("F23") = "GPM" End If If OptionButton2.Value = True Then Sheets("Main Screen").Range("F23") = "lbm/hr" End If End Sub
i have a user form in my spreadsheet that uses option buttons and text boxes for user entry. i need to take the values and true false entries from the option buttons and place them in cells. i am alittle lost with this.
How do I get the listboxes to pre-populate based on the Userid and Option Button selection? Furthermore, write back to the correct cell once the selection has been made?
How can I get the combobox to remove blanks in the Userid? (if each cell in row2 has to be populated then so be it)
I would like to set up some option buttons so that the will be become visible and enabled when a check box is checked, and the opposite when the same checkbox is not check. This is my problem
Private Sub cbpDiscAlum_Click() Dim myOption As Control Dim myValue As Boolean myValue = cbpDiscAlum.Value = True If myValue = True Then For Each myOption In pDiscounts.Controls myOption.Visble = True myOption.Enabled = True Next myOption Else For Each myOption In pDiscounts.Controls myOption.Visible = False myOption.Enabled = False Next myOption End If End Sub
It is the 5th command where it gets hung up: For Each myOption In pDiscounts.Controls. I am sure I am spelling both of the names correctly: the checkbox, and the group name.
Is there a way to set up a "watch" on a cell so that if you type in a different number on a cell, OptionButton1_Click() gets activated? Example:
A9 = 12.0104 OptionButton2 is active.
In Cell A9 you type "25.0508". OPtionButton2 becomes inactive and OptionButton1 becomes active. I already have the buttons linked, i just do not know how to make the button get triggered if A9 changes.
I HAVE A SHEET WHERE USER ENTERS DATA, AND WHEN USER ENVOKES MACRO, THE SAID DATA IS COPIED TO A 2ND SHEET WHERE IT IS STORED. NOW PROBLEM IS THAT IT COPIES DATA OVER PREVIOUS DATA, BECUASE THE REFRENCE IS NOT DYNAMIC. WHAT I NEED THAT THE DATA IS COPIES EVERY TIME TO THE NEXT ROW,
I want to press a commandbutton and fillacrosssheets but I only want to fill the values, no formatting, no formulas.
The following code works, but carries over the formulas and values. I tried changing xlFillWithContents constant but without success.
Private Sub CommandButton1_Click() Dim msg As Integer Dim ws As Variant
msg = MsgBox("You are about to copy over the existing cells in columns D through P of the Bill Of Materials. Do you want to continue?", vbYesNo + vbQuestion, "Paste Cells")
If msg = 6 Then ws = Array("Bill of Materials-2", "Admin") Sheets(ws).FillAcrossSheets _ Worksheets("Bill of Materials-2").Range("D20:BottomLineC"), Type:=xlFillWithContents End If If msg = 7 Then Exit Sub End If Application.CutCopyMode = False Range("A1").Select End Sub
I have a worksheet consist of some 17,000 records - from ColA:ColDZ. In Datasheet, I have all values. From this, based on some values in ColA all records should be copied into another sheet(s).
I have attached a sample workbook in which I have explained the requirement.
I have a spreadsheet that contains numerous ranges on different sheets with monthly data. The year begins with all formulas for forecasted data and as each month passes I need to copy/paste values in the current month column to reflect "actual" data vs. "forecasted". I would like to simplify this by using VBA, based on an inputbox ("current month") to find the month in each range and copy/paste values.
I have workbook having 3 sheets out of them 1 sheet name "report". I want vba to disable copy /past option to sheet Report only with msg " copy not allowed" if key clt+c or copy option selected
Here i am attaching the excel sheet where macro is enabled. I have added macros in last spread sheet (Consolidated) everything is working fine. Whats messing is i have copied a macro for the entire workbook, which will disable Copy/Pase/Cut option to all engineers. But problem is its disabled for me as well, every time i have to delete the code for copy/cut options. I just want cut/copy option in the last worksheet (Consolidated) where i can get all the result with out touching the rest of the sheets.
with code that will Cut and Paste a Range (Row) based on choosing "Done" from a Validation list. So, as a task is completed it is deleted from the "Summary" worksheet and then pasted to the "Done" worksheet. I am new to writing Code and have been piecing together bits and pieces. Here is what I have so far:
I have a survey with 2 checkboxes for each question. Users need to tick only 1 checkbox for each question. The checkboxes have been created from Forms toolbar. However the feature of checkbox is such that the user can tick more than 1 checkbox. Is there a way that for each question only 1 checkbox is ticked? I attached a sample for your reference.
I would like to copy and paste the values from a worksheet (HS-Detail) in a file to different tabs depending on the value in column A (Regions). I have a macro that works but it pastes the formulas and it takes quiet a while to run due to the number of records. How can I alter this to paste just the values and speed up the macro?
I am very new to Macro programming. I want to set up a macro which will copy data from few cells in a sheet and paste them as "Values" to certain specific locations in another sheet based on criteria. This copy paste needs to be done for about 40 different cells. I want to fix this with a button on the source sheet, so that this process happens when the button is clicked. I am attaching a sample file showing what I need.
I'm trying to copy the non blank cells in an area ("B120:K239"). and special paste (values only) to the next blank row of the actual work area (3 pages) within the worksheet. The area that this needs to paste to is between("B10:K29, B44:K63, B78:K97"). Problem is that if there are more rows to be copied and pasted then there are open rows on the first sheet it gives an error due to the rows outside those areas having different formats (merged cells and that)
Question: Is there anyway to special paste between ranges? I've tried to hide the inbetween rows and that still doesn't work. Could it be possible to add something to this code to ignore hidden rows or to only paste to visible rows?
Sub Special_Paste () Application. ScreenUpdating = False With Range("B119") . AutoFilter Field:=2, Criteria1:="<>" With Range("B120:K239") Application.CutCopyMode = False .Copy With Range("30:43") .EntireRow.Hidden = True With Range("64:77") .EntireRow.Hidden = True Dim NextRow As Range Set NextRow = Range("B97").End(xlUp).Offset(1, 0)...............
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB" (2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB". (3) then automatically run a recorded macro named "BoldFirstName"
