By using a macro on the attached report I like to copy the row values named "Section Total" in red and and paste them over the values starting with "Aged Debt" in blue (the rest of the wording cahanges every month so "Aged Debt" is the key word for that row).
View 1 RepliesSheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View RelatedAttached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
How can i use this code to make it working also on a range filtered
Sub CopyPasteValues()
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues
End Sub
How do I tell VB to copy the values from whole row on one worksheet to the row with the active cell on another worksheet?
View 3 Replies View RelatedI paste cell information into cells already formatted to have certain colored backgrounds, ect. However, upon pasting the cell format from the copied cell is obviously applied.
Is there a way of locking the cell formatting so that I can paste information from a different cell, but the font/bground colors stay the same?
How do I adjust this formula so it copies & paste special values rather than copying formatting etc? I am very new to this and I have looked at other examples but have found it hard to adjust my code using those examples.
VB:
Sub PrepayjournalKW()
'
' PrepayjournalKW Macro
'
Range("A6", Range("A" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("A1")
Range("B6", Range("B" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("C1")
Range("AB6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("D1")
Range("AF6", Range("AB" & Rows.Count).End(xlUp)).Copy Destination:=Sheets("Journal").Range("E1")
End Sub
I am trying to create a macro to automatically copy and paste values from column M into column N.
Column M is a Concatenated formula, and I want people to be able to copy the result easily without having to do any copy+"paste values" themselves.
So I have the following:
Sub CopyFormulaResults()
Application.OnTime Now() + TimeValue("00:00:01"), "CopyFormulaResults"
Range("M3:M1000").Select
[Code]....
However, the macro only runs when I run the macro, not automatically every second like I want it too.
I have basic values in sheet named 'Basic"
i have aggregate values in sheet named "Aggregate"
The values shown in B5:D5 in sheet basic is an outcome of a formula.I want this values to be copied to E3:G3 in sheet named aggregate.
likewise the values shown in B11:D11 in sheet Basic to be copied to E4:G4 in sheet aggregate.
i can do this manually by copy and paste special-values.
But is there any way to done it automatically by excel?
we have numbers in cells at positive and nigative values, how can we copy and paste in absolute values
View 2 Replies View RelatedI'm downloading a tone of financial data from a database and without fail there are always a few odd numbers over time that are either wrong or that I want to through out of my charts/analysis. But I don't want to change them directly in the sheet that I use the code to download straight from the database since I can just click update and the codes refresh the latest data into the format I need. Basically once I hit refresh and download the data into the coded worksheet template I want a macro that lets me pick a tab or multiple tabs and copy and past special value the data into a new worksheet where I can manipulate the data without screwing up the code.
View 3 Replies View RelatedI'm getting better with Excel and have gotten pretty good with formulas, but my VB/Macro understanding is limited, if not non-existent!
What I need is to assign a macro to a button so that when executed, it copies the entire sheet and pastes all as values.
Tried all day to find a way of selecting text ( from several cells) on one sheet and then having it pasted into the textbox on another sheet. I did originally paste the text to a cell but it makes the row's vary in size depending on the copied text and gets a bit annoying. Seems to be This is the paste to Cell code
View 4 Replies View RelatedI need to automatically copy cell IR18 value to cell JT18. I've been searching the forum for some code and I came up with something that only partially works for me:
View 10 Replies View Relatedin my original sheet, I have lots of formulas. I'd like to create a new sheet that uses the same values from my original sheet.
View 2 Replies View RelatedI have the following data column:
and I would like to copy and paste these values in column B WITHOUT THE EMPTY CELLS, see below:
I have copied over a row of $, ($) amounts from one worksheet to another. I am trying to make the amounts I copy over past in absolute values. Is there a way to do this? Below is the current code:
'copying over the Amount in Local Currency ST Reclass
Sheets("Recon_ST").Select
Range("S9").Select
Range(ActiveCell, ActiveCell.End(xlDown)).Select
Selection.Copy
Sheets("ST Journal entries").Select
Range("J2").Select
Selection.PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
I have the following macro that copies data from a calendar-style setup on one sheet and pastes it in a contiguous list on another sheet:
Code:
Option ExplicitSub move_daily_data_to_ordersvstips()
Dim OutSH As Worksheet
Dim findit As Range
[Code]....
I would like only the values from the "Data by Month" sheet to paste to the "Orders vs Tips" sheet. However, all my attempts are returning various errors/inconsistent results.
I HAVE A SHEET WHERE USER ENTERS DATA, AND WHEN USER ENVOKES MACRO, THE SAID
DATA IS COPIED TO A 2ND SHEET WHERE IT IS STORED. NOW PROBLEM IS THAT IT COPIES
DATA OVER PREVIOUS DATA, BECUASE THE REFRENCE IS NOT DYNAMIC. WHAT I NEED THAT THE DATA IS COPIES EVERY TIME TO THE NEXT ROW,
I need to copy the cell values from one worksheet to another. the code works, just that it copies the formatting as well What should be changed in order to copy the values only?
For outerLoopNum = 2 To Application.WorksheetFunction. CountA(wksNew.Columns("A:A"))
For innerLoopNum = 2 To Application.WorksheetFunction.CountA(wksUpdate.Columns("A:A"))
If wksNew.Range("A" & outerLoopNum) = wksUpdate.Range("B" & innerLoopNum) Then
wksNew.Range("AG" & outerLoopNum & ":AJ" & outerLoopNum).copy
wksUpdate.Range("AP" & innerLoopNum).Select
ActiveSheet.Paste
I was trying to build a macro which will push - copy and paste (but only values) the last raw down for one line. I tried to use existing answer for copy, paste and pushing down rows find on this forum, but raws a just moved without pasting the values.
View 3 Replies View RelatedI can copy one range to another with:
Rng1.Copy Rng2
How can I modify this so I only paste over the values (not formulas)?
I want to press a commandbutton and fillacrosssheets but I only want to fill the values, no formatting, no formulas.
The following code works, but carries over the formulas and values.
I tried changing xlFillWithContents constant but without success.
Private Sub CommandButton1_Click()
Dim msg As Integer
Dim ws As Variant
msg = MsgBox("You are about to copy over the existing cells in columns D through P of the Bill Of Materials. Do you want to continue?", vbYesNo + vbQuestion, "Paste Cells")
If msg = 6 Then
ws = Array("Bill of Materials-2", "Admin")
Sheets(ws).FillAcrossSheets _
Worksheets("Bill of Materials-2").Range("D20:BottomLineC"), Type:=xlFillWithContents
End If
If msg = 7 Then
Exit Sub
End If
Application.CutCopyMode = False
Range("A1").Select
End Sub
I have a userform that I use to add a new record to a csv sheet.
In my workbook I have a table with the same format that my userForm has. What I am looking to do is copy the values from my lookup table on my sample sheet and past them in my add userform in the correct corresponding cells. I have been trying to make the code work for some time now with no luck.
workbook sample.zip
So I have two cells D15 and C15.
I simple want to copy there values (There paste links)
And paste them into the next blank row between D/E17/ and D/E26.
i had data in html format.i want the data to be splitted into columns in excel.
HTML FORMAT
Employee name
Emp id
johnabraham wesley peter neiljohn and so on....... 254800 254801 254802 254803
i tried copying the data from html to excel. Then applied text to columns but i m getting incomplete names from this step.
My problem is how would i get the full name in one Column(Column B) & the emp id in the next Column (COLUMN C).Column A will have the data copied from html page. The length of the employee name differs. The only saving tip is that the employee name will suffix with sno like
Johnabraham -1
254800
I am looking for a macro that will copy a worksheet to a new workbook and 'paste as values only' - this is because I already have a macro that I am trying to use to 'autofilter' the sheet to only show rows and colums that have entries in them. Since the sheet is dynamic, the macro will not work unless I copy and paste as values only...
Workbook attached - FYI, the 2 sheets in the workbook are actually in 2 separate books, I have just put them together to make it easier to post here...
getting a vba formula to copy values from two columns and paste it in 3rd column on the click of a button.
For example:
if I have 3 rows filled in column A and 5 rows filled in column B then i need a formula to copy 3 rows in A and 5 rows in B and paste it to column C. so column C will have 8 rows now.
The number of rows the value can be entered can vary. [ example: sometimes we may have 6 rows filled in A 2 rows in B ]
a VBA code to do the following:
I have a worksheet consist of some 17,000 records - from ColA:ColDZ. In Datasheet, I have all values. From this, based on some values in ColA all records should be copied into another sheet(s).
I have attached a sample workbook in which I have explained the requirement.
I know it's very simple; I'm obviously a beginner. What I would like to do is to have an input box prompt me and then take these values and paste them into columns. One value for each column. Ideally what I would like to have happen is for the values input into the inputbox to be pasted to specific cells. I have attached an image for reference. The beginning of the range B10 and C10 will be fixed but the ending cell range B14 and C14 will be variable based on the number of entries; essentially one less than the total number of forms on row 15.
View 11 Replies View Related