I have a workbook with one sheet. Some of the information in this sheet do I want do move to a new workbook, whit only one sheet. Then save the sheet as a CSV file.
I’m sure that this is simple, but I am very new in VBA.
So can someone help me with how to write a macro that create a new file whit only one sheet, and than saves it as a CSV file?
have a basic knowledge of VBA. The task I am trying to perform with VBA is to
1. Copy from sheet1 A1 to sheet2 E9
2. Copy from sheet1 B1 to sheet2 E11
3. Save sheet2 in a new workbook file with the file name cell data from sheet1 A1 (511894.xls)
4. Copy from sheet1 A2 to sheet2 E9
5. Copy from sheet1 B2 to sheet2 E11
6. Save sheet2 in a new workbook file with the file name cell data from sheet1 A2 (097219.xls)
7. Repeat the process down columns A and B to the end of the columns.
8. Columns A and B will end at the same time but the data and the last cell will change with each scan added to the columns.
This code will accomplish this task with a single column of data but not two columns. Also column B will have a mixture of numbers and letters in its cells, Column A is only numbers.
VB:
Sub MoveData()
sName = "temp"
Const csPath As String = "C:Documents and SettingsmcgaulcDesktopTestFile"
'MyName = ActiveWorkbook.Name
[Code].....
Here are some images of the data sheet and the saved sheet
Sheet1.jpg Sheet2.jpg Note: sheet2 in image is "temp" sheet in code
When I use this code in the workbook I want it gets as far as creating a new workbook and pasting the data, but then an error comes up saying nothing but "400", and does not complete the saving part.
Private Sub Workbook_Open()
Sheets("Open").Activate
End Sub
Sub SaveASheet()
Dim fName As String
Dim myPath As String
Dim sht As Worksheet
myPath = "K:3. DesignSupply OrdersLog"
For Each sht In ThisWorkbook.Worksheets
If sht.Range("D1").Value "" Then
sht.Copy
With ActiveWorkbook
.SaveAs myPath & ActiveSheet.Range("G11").Value & ".xlsx"
.Close
End With
End If
Next sht...................
I need some code that copies from one sheet into another sheet... I am thinking to have a middle sheet with all the code pulling the data from "infosheet" into another sheet "vendorsheet". I'm just wondering if this is the right way to approach this issue.. because the vendor is going to want to use the sheet and we want to automate this operation.
This is what I have so far... but this is on the actual file that we are working with so I want it to be from a middle file. It creates a new file but it doesn't save it also... I'm not sure whats wrong here so any help is greatly appreciated!
Private Sub Workbook_Open()
Copy
End Sub
Sub Copy()
'
Application.CutCopyMode = False
Sheets("infosheet").Select
Range("A1").Select
Range("A1:G50").Select
Sheets("infosheet").Select
Sheets("infosheet").Copy
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.Copy
SaveAs1
End Sub
I have a workbook that has worksheet called "Data". In that workbook, there is some codes for the event of "workbook_beforeprint". My question is whether i could create a copy of the "master" workbook and delete all the unwanted sheets but "Data" sheet using VBA. There are some codes of creating a new workbook but i suppose i need to the exact copy of the current workbook using VB
View 3 Replies View RelatedI want to take the current sheet and copy to a new workbook (keeping the tab name) and then save as the tab name (xlsl) and close.
I've found ones that do a Saveas box or ends up saving as "Sheet1," "Sheet2" etc but can't seem to find one that keeps tab name and saves.
Here is the one I was using, but it saves all tabs not just selected:
Code:
Sub CopySheet()
Dim fname As Variant, ws As Worksheet, wb As Workbook
Dim nCol As Integer, iCol As Integer
[Code].....
I need VBA code for the following - I have a worksheet with seven colums of data (A to G) - I need to copy the first column (A) from the active worksheet then open master workbook called 'master' and paste the data in to column D - then save the 'master' as the name in cell Z1 of the 'master' workbook. Once this has been been completed I need to repeat the process but this time copying column (B) and so on.
View 4 Replies View RelatedI have an excel file which I use when I book keep journals in work. Each time I come across a new piece of bookkeeping I add to the file, name the sheet and index it. (I've attached a loose example for illustration) so the bookkeeping template.xls gets bigger every day.
Currently, when I book keep on a particular day, I open the template.xls workbook;
draft my journals;
and then manually copy the worksheets I have completed during the day from the template.xls workbook and paste the sheets into a new book and save the days bookkeeping as the current date.
With the file I have attached can someone show me how to write a macro and apply it to each of the buttons on the various work sheet tabs (each button will run the same macro).
Upon clicking a button, I would like the macro to;
Copy the active sheet into a new book and save the file as the current date.
Each subsequent click of a button the macro will check if the .xls file exists for the current date, if it does, then it will just copy the active worksheet to the file that has already been created.
In the new file which is saved as the current date, I need to remove the macro button and the hyperlink that reads back to index.
I have had some helpful macro's provided from another forum, however, the other forum does not appear to enable users to upload files, so I can't quite convey what it is I am trying to achieve.
I have a sheet that users fill out and there is a macro on that sheet to copy the info to another workbook, save and close.
for some reason, the date, which originates from a cell with the value "=Today()", and when pasted in to the new book, it is pasted values.
the issue is, every so often, the date will say 09/26/10 and continue to do so for quite a few entries.
i have tried almost everything. I checked the dates on the computers, and all are fine. i even went through it step by step, and when the data pasted it, it was 09/26/10.
Code to copy the sheet that get selected by if-then-elseif statement and paste in a new workbook, save the workbook as temp, email it and delete it,
sub sending_mail
Dim OutApp As Object
Dim OutMail As Object
Dim rng As Range
Dim DataWB As Worksheet
[Code] ......
I have been trying to edit a code which previously saved a copy in a new workbook to a specific folder/path. (Additionally it copies and clears some figures, but this is working as it should.)
However I would like the copy to be saved at the same location as the original workbook, regardless of the path the original workbook is saved.
I.e if I need to move the workbook containing the code to a new folder/location, when using the macro, the new copy should be stored in the same folder/location as the original one.
For now it is only saving the copy into "My Documents"
Code:
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 16-02-2009 by ceng
'
Sheets("Bunker ROB").Select
Sheets("Bunker ROB").Copy
ActiveWorkbook.SaveAs Filename:= _
ActiveWorkbook.Path & Range("D3"), _
FileFormat:=xlOpenXMLWorkbookMacroEnabled, CreateBackup:=False
[Code] ........
I have a sheet which I would like to back up online every time it is saved.
I have a sub, OnlineFile(), which I have used many times without any problems, which creates a .BAT file to use ftp to upload files onto our server. As arguments, it takes the local file path that you want to upload (or download to), the name of the file as you would like it stored, the online file path, and whether you want to upload the file onto the server, or download it off the server.
It should be very easy to combine the two: what I tried was:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, cancel As Boolean)
ThisWorkbook.SaveCopyAs ThisWorkbook.Path & "" & "Rubbish.xls"
Call OnlineFile(ThisWorkbook.Path & "" & "Rubbish.xls", "Rubbish.xls", "wwwrootexcelfilesMasters", "Upload")
Kill ThisWorkbook.Path & "" & "Rubbish.xls"
End Sub
Every time I ran this, the file got uploaded correctly, but Excel had a series of problems. Often the code ran fine the first time it was run, but crashed the second time round.
After a fair bit of troubleshooting, I found that the problem came about when the file was trying to save itself - i.e. after the end of the sub. If you pause any macros from running, it still saved fine, but when the code ran, it found errors, froze or closed excel.
My thought at this point was that the code was fragmented or something. I made a new sheet, and retyped just the relevant bits of code (i.e. the BeforeSave sub, the OnlineFile sub and created the form called by OnlineFile). The problem persisted.
I've come up with a workaround for this now (which uses the same OnlineFile sub & form, and works fine), but it's driving me crazy - why does this cause excel to die? Particularly on the second time through? The code seems far too simple to cause such problems - is there a bug in Excel perhaps (I'm using Excel 2000 on Windows XP).
provide me a code for extracting data and outputting it into individual worksheets situated within the excel workbook file. I am wondering what the code would be if the data were extracted to individual text files, individual workbooks or *.prn files?
For i = 2 To Cells(Rows.Count, 1).End(xlUp).Row
Set ws = Worksheets.Add(After:=Worksheets(Worksheets.Count))
ws.Name = wsraw.Cells(i, "D")
With ws
.Range("A1") = wsraw.Cells(i, "D")
.Range("A2").Resize(2) = wsraw.Cells(i, "A")
.Range("B2").Resize(2) = wsraw.Cells(i, "B")
.Range("C2") = 0
.Range("C3") = 1000
.Range("A4") = -999
End With
Next
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
i have tried to change this code to save just the first sheet
and was wondering if anyone could hel me fulfil this as i keep getting an error
i will make the code red as to what i have changed
I've been playing with writing a VBA script that will copy and display the value of a cell right before saving the document.
I already have a script that saves the savetime to a cell but have been unsuccesful in using any code from that.
What I'm trying to do is to have the VBA copy different cells depending on the value of another cell.
I've been trying with some IF rules but don't really know if I'm doing this right. I'm also not sure if the code should be in "Sheet1" or in "ThisWorkBook" and if it should be a Private Sub - I've pretty much just tried a bit of this and that.
Let me try and sketch out the scenario:
I want to copy the value of a cell into a second cell depending on the value of a third cell - just before the document is saved.
How could that be done with the cells listed below?Copy-to: "A1" (the value of "B?" depending on the value of "C1")
Copy-from: "B1" IF "C1"=1
Copy-from: "B2" IF "C1"=2
Copy-from: "B3" IF "C1"=3
Copy-from: "B4" IF "C1"=4
Another problem I've been having is to change the colour of the font in a given cell if another cell returns a value of, say, 1.
I want a Macro which will copy my workbook and paste it into a new workbook. Then it will automatically save it under the SAME name as the original and the SaveAs Box must show up (for cosmetic fixes). It is important it asks if it wants to save it under the same name. Example: My file is called "Summary_2008" and when I hit the Macro it will do those things and it will ask me if I want to save it in the SAME directory under the name "Summary_2008" (I will only add a number then).
(The macro must know how to read the original name since I have 7 possible filenames - it depends on which company I choose, that is why it is important it is saved under the same name)
Sub Zamenjaj()
Worksheets.Copy
Dim WS As Worksheet
For Each WS In Worksheets
Zadnja_vrstica = WS.UsedRange.Rows.Count
Zadnji_stolpec = WS.UsedRange.Columns.Count
For rwIndex = 1 To Zadnja_vrstica
For colIndex = 1 To Zadnji_stolpec
With WS.Cells(rwIndex, colIndex)
If WS.Cells(rwIndex, colIndex).HasFormula Then..........................
I need a macro that will save the range of cells with values as a pdf and saved as the sheet name. I have a macro that does a print preview function based on the cells that contain values. It works great, but instead I just need this to be saved as a pdf.
This is what I have:
[Code] .....
I have excel file which has got 3 sheets.
I renamed the 3rd sheet as "Audit Sheet"
I want a macro to save only this sheet3 "Audit Sheet" as a new file in "my documents folder" but the name of the file should be as follows
The sheet3 has this values..
Cell B1 has value " George"
Cell D1 has the value "Week 1"
The name of the file should take value enterd in B1 ( that is George) and value in D1 ( Week 1") so the file name should be "George Week 1".
I have a macro that has to open another worksheet and get data and close the sheet. The problem is when the sheet closes after I have gotten the data it asks if I want to save it. I don't want the user of my macro to see this option because it slows things down. To avoid this in the past I had the worksheet save itself so that it wouldn't ask me to save. Now the worksheet is large and it takes a while to save and it is getting slow. Is there any way not to save it but close it without having excel asking if you want to save it?
View 2 Replies View RelatedI have some code that basically searches through one Master Sheet (that the user will change each month) and based on some criteria, copies and pastes data onto 12 other sheets.
I was wondering how i make it so that the 12 sheets will save automatically as a different name depending on the date given on the original master sheet. For example, Master Sheet will have a cell that says September 07 and i want to save each of the other 12 sheets as "Name1_October 07", "Name2_October 07", etc. Is this possible to do while keeping the original Master Sheet along with the other 12 originals?
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
I have a Workbook with around 10 worksheets on, each worksheet is a form.
And when one form is completed we have to save a backup. So i want to assign a macro to a button on a worksheet so when clicked it will save a copy of that worksheet ONLY to a destination and not all the other worksheets along with it.
How to copy the entire worksheet into a new workbook and save the file to a specific directory with the following filename format ("exceptions191011 - ie. the word exceptions followed by today's date in ddmmyy format).
Here is what I've got so far:
Code:
Sub SaveAs()
Dim FName As String
Dim FPath As String
FPath = "G:Exceptions"
FName = "Exceptions" & Format(Date, "ddmmyy") & ".xls"
Sheets("DataSort").Copy
ThisWorkbook.Sheets("Sheet1").SaveAs Filename:=FPath & "" & FName
End Sub
How to add the following condition that if a file already exists with that name then to bring up an error message stating the file already exists? As well as save the new workbook, it appears to close the original workbook - can I stop this?
I have a code in which we can split the data using column values into new and same sheet also. I want to modify this accordingly to my need but i am new in VBA so can't modify this. i want 2 changes in this macro:
1. I want to set a value (Like:"Resolved"," In Process" ) in the macro to extract the data related to the value only. Means, when i run this macro it will extract the data only for "Resolved" status. I have to create two macros for each defined status.
2. After splitting, it will ask me to save the new workbook location.
3. Save it.
The codes i m having are :
First code to make directories:
Code:
Public Type BROWSEINFO
hOwner As Long
pidlRoot As Long
pszDisplayName As String
lpszTitle As String
ulFlags As Long
lpfn As Long
[code].....
I have created a spreadsheet for my friend. As my friend is a little 'scared' of excel I created drop downlists to complete the spreadsheet i have also protected all the cells that have formula in them so that they can not be deleted.
the spreadsheet he opens is prefect, he then updates this spreadsheet and has done something wrong but doesn't realise, he then saves the spreadsheet, it is at this point he wants a back up copy of the perfect spreadsheet, that way if he goes back into the saved copy and realises that something is wrong he can go to the back up copy and start again. This spreadsheet is filled in once a week, that way if he has done something wrong and has to refer to the back up copy he only loses one weeks worth of work.
I did say that he could choose save as instead of just save and re-name the file but again he is worried that he will forget!
Can we create a back up file automatically? If yes, can some please tell me how to?
I have never used macros or anything so if you can do this, can I ask that you also explain to me how to do it.
I have a bill of materials for each job I do, I have multiple cut sheets in one spot on the network that must be individually copied and pasted into the project file for each job. I’m hoping to automate the process. Post extraction dump from AutoCAD, my text file goes into a excel file that the information is used by multiple tabs including a bill of materials.
From the bill of materials, I want to say “if C3>0 get file 10P0044HP2.DOC” . . . I want it to get the file and save to the individual project file. .. Possible I’m not so sure. But I’m not sure of where to start.
I need save my workbook as copy to another directory, ( C: ) with VBA code
View 9 Replies View RelatedI know that the line in my code Worksheets.Copy is NOT what I need to have to make this work, but with it it's the closest I could get to what I want.
I want the user to be able to click the SAVE command button, be allowed to either accept or change the default save options, save the current workbook and then go right back to the form that has the SAVE command button. Sounds simple, I know, but when you don't know the right commands to save the WORKBOOK, not just the WORKSHEETS, it becomes a P.I.A.
I know there's a lot there, but here's my code, which is just a slightly altered version of the code by Ron de Bruin:
Private Sub SaveData_Click()
'If no date has been selected then don't allow SAVE
If PubDateLabel.Caption = "" Then
MsgBox "Publication Date not set. You must select a date before saving.", vbCritical, "No Publication Date!"
Exit Sub
End If