I am trying to run conditions on rows and if conditions are met move all rows that meet that condition to a new sheet. I have serveral thousand rows on what we will call sheet1 with about 25 coulumns.
I have 2 worksheets (X and Y) and am trying to write a macro/vba to copy certain cell values from a row if that row has a marked cell. For example, on sheet X, marked cell is column P and when P = "Y", then values from cells B, D, I, J, L need to be copied to sheet Y.
Sheet Y has multiple rows and the values from X need to be copied into appropriate rows. B from X goes into A from Y, D into B, I and J into C, etc.
Im not sure how to go about this other than have every cell copied and then filtering sheet Y. But Id like to have a macro only copy marked rows and appropriate cell values (some contain formulas) as the data is constantly changing and sheetY has to be printed up.
Im trying to copy data that meets a certain criteria from a list on one sheet to another. The problem with the code i've written is that i can't get the loop to work. Once it finds one example it copies it but then stops. My code is as follows:
Private Sub Find_Ammendments_Click_Click()
Dim RowCounter As Integer, RowCounter2 As Integer, RowRange As String
RowCounter = 1
Sheets("PINTS & BOTTLES").Select
Range("Start_pb").Select
While ActiveCell.Offset(RowCounter, 0) <> ""
RowRange = ActiveCell.Offset(RowCounter, 0).Address & ":" & ActiveCell.Offset(RowCounter, 8).Address
If ActiveCell.Offset(RowCounter, 5) >= ActiveCell.Offset(RowCounter, 10) Then......................
I am trying to write a macro where it will delete rows in Sheet A if any condition is found in the row which is based of conditions in Sheet B.
Sheet A :
Column A Column B Column C Column D
1234 ABC tyu 4588
asd qwe www 4455
zxc zdaa 1234 4441
ghj llll 1111 poo0
Sheet B (where i kept my conditions in Column A: )
Column A
1234
1111
(and many more....)
the end results will be the Row 1 and row 4 will be deleted. I have tried to google but most only contains deleting rows with a specific conditions.
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies View RelatedEXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies View RelatedI have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View RelatedI am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
View 14 Replies View RelatedIn a sheet (4) I have a pivot refreshed by a VBA macro code. Since I have defined a Chart on this pivot, I need to copy this pivot in a new sheet to avoid to reduce rows using a filter of the Chart. I copy this pivot using this VBA code
Sheet4.Select
Sheet4.Copy After:=Sheet2
I have e new sheet with a number Sheet(n) not equal to maximum sheet number +1
For a new run of the VBA macro I need to delete this sheet
Sheets(n).Select where (n) is not = maximum sheet number +1
ActiveWindow.SelectedSheets.Delete
Then I need to avoid the message box where I need to confirm to delete the sheet because the sheet is not empty.
Is there a solution to copy a pivot in a new sheet replacing the previous pivot and vithout changing the number of the sheet?
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI have a workbook with a hidden sheet ("Template") and a visible sheet("New Job"). I need code so when cell F1 in "New Job" is populated:
1-the sheet is renamed to the value of F1,
2-a new tab is made (a carbon copy of the hidden sheet "Template")
3-the new tab is named "New Tab" and marked as unhidden.
Public Sub Worksheet_Change(ByVal Target As Range)
ActiveSheet.Name = Range("F1").Value
End Sub
Function WorksheetExists(SheetName As String, _
Optional WhichBook As Workbook) As Boolean
Dim WB As Workbook
Set WB = IIf(WhichBook Is Nothing, ThisWorkbook, WhichBook)
On Error Resume Next
WorksheetExists = CBool(Len(WB.Worksheets(SheetName).Name) > 0)
End Function..................
I'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))
[Code]....
Ok so i have 2 sheets. Sheet 2 is a form that needs to be printed.sheet one will have data pasted into it by the user. The data will be placed in column a and b. If a has data in it then so will b. Now I need the macro to identify if data is in a then the macro needs to then copy a and paste special into A18 on sheet2 then copy b and paste into A6 on sheet2 then print sheet2. Repeat this process to every row as long as A has data in it.
View 3 Replies View Relatedupdate code based on a dynamic range of cells, which worked! I want to drop a csv file into one sheet, and copy the data to another sheet. However, if I drop a new csv file in, and there are fewer rows, the old rows aren't deleted. For example, if my first set of data had 10 rows, and the new has 8, the extra two rows are still there.
[code]
With Sheets("Raw Data")
.Range("A10", .Range("A" & Rows.Count).End(xlUp)).Copy ActiveSheet.Range("A12")
.Range("B11", .Range("B" & Rows.Count).End(xlUp)).Copy ActiveSheet.Range("B12")
.Range("E11", .Range("E" & Rows.Count).End(xlUp)).Copy ActiveSheet.Range("C12")
.Range("F11", .Range("F" & Rows.Count).End(xlUp)).Copy ActiveSheet.Range("D12")
.Range("H11", .Range("H" & Rows.Count).End(xlUp)).Copy ActiveSheet.Range("E12")
End With
[code]
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I have a workbook that I want to copy two separate ranges from and then post to two different sheets. Range one on the active sheet from A4:K(no of rows will vary) to sheet Savoury Year, and range two A64:K(no of rows will vary) to Site Services Year. When pasting I want to paste it to the next empty row down.
Copy of workbook attached : Weekly Accounts.xls
I need to copy columns b,g & h from workbook1 to workbook 2 c ,e, f
workbook1 is the path mentioned in cell A1
Workbook2 is the path mentioned in cell A2
I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
View 10 Replies View RelatedI would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies View Relatedi want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies View Related