So I have a work book with a number of user forms. One form I have completed has several navigation buttons (previous, save, next......) a couple of drop downs and a "tabbed" (pages) area with a text box on each. I think I finally have it looking (and working) the way I want. The issue is I need 12 more that are Identical (different text - but layout and code is the same) To make them look and work the same how can I copy the one I have correct? Is Export/Import the way to go? Does that bring all the code?
I am trying to graduate out of the crayon age of menus on a worksheet, to using a User Form Menu. Problem is, I don't understand how they work. I've created a test program using a simple form with an option button, a combo button, and a command button. The goal is if the option button is true, it places the color selected in the combo button on the worksheet. Here is my code, what am I missing to make it work?
My problem is trivial but annoying. When I initiate my user form, one of the check boxes has a dashed border around the outside as if it was selected. No matter what I try, I cannot get the form to initialize without effecting this box. If I delete the box and recreate it, another box simply inherits this problem.
I have attached the spreadsheet, please Click the button over "A1" to see what I mean if you have the time.
I have a userform, when it first comes up, then there are some text boxes that needs to be filled. I have the "ok" button which opens another form. What would be the code for whatever was filled in the text box be pasted in a cell? In other words, once it is ok is clicked another form pops up and then whatever info was put in the text boxes is pasted in a report.
I have 2 User forms which take their initial values from the same worksheet. One moves stock to another location, the other removes stock when it has been used.
When I use one of the forms on a different row, or switch to the other form it retains the last row's values until I click on the new worksheet row twice
How can I prevent this?
Private Sub CommandButton17_Click() If UserForm5.Visible = True Then Unload UserForm5 End If If ActiveCell.Row = 1 Then MsgBox "Cannot Use This Row, Choose A Different One" Exit Sub End If UserForm4.Show vbModal End Sub
Private Sub CommandButton18_Click() If UserForm4.Visible = True Then Unload UserForm4 End If If ActiveCell.Row = 1 Then MsgBox "Cannot Use This Row, Choose A Different One" Exit Sub End If UserForm5.Show vbModal End Sub I won't post the form code here yet as both are quite large. Maybe someone has encountered this issue before?
I am making a user form so that others can enter their data into a database. In some of the fields I want to have a drop down list that will contain both all the options from a generic list, and any other items that have previously been entered into that field. For example I have a generic list of components but someone may feel that none of those listed describe their component so they will add a new one, I want this new one to then appear within the drop-down list for the next user,
I need to create a user form that will "pop up" and ask the administrator to enter the above details.
A - should be created automatically (ie last claim number + 1) B - user enters manually C - data retrieved from a list D - data retrieved from a list E - date is the date the information is entered
I am using a calendar control 11 in a user form. I would like to create a combobox on a user form that when you click the drop down button it opens the calender then the user can select a date which is then returned to the combobox. I beleive the way to do this is to trap the dropbuttonclick event. Tho it dosent seem to work.
Private Sub ComboBox2_DropButtonClick() Calender.Show ComboBox2.Value = Calender.Calendar1.Value End Sub
In VBA i have 3 userforms, the first 2 take the data and store them in variables. The 3rd form is supposed to take the variables from the other two forms and do some calculations with them. Although i cant get the 3rd form to take the stored variables from the other two forms. Is there a way to use stored values from other userforms?
User Form Basics - Populating Text Boxes. A few tweaks later and its reading the data just fine. Some of the specific form objects and range names have changed, but it's the same logic.
Anyway, this isn't just for display. I need to export the data back to the spreadsheet. So, I plugged this line into the event handler for the "Save & Exit" button on the sample form in the other thread:
I have a little knowledge of Excel Programming and I am seeking advice and help. With reference to the http://www.exceltip.com/st/Create_Us...Excel/629.html, I managed to create the form but I somehow couldn’t get it executed. Attached herewith my file for evaluation.
I have checkboxes in N85:N100 and O85:O100. When I use the following code, it gives the same link in N85 and O85. How can I put a specific rannge so that it will only do N85: N100 and then do O85:O100.
Sub change_forms_checkbox_links() Dim mychkbox As CheckBox Dim wks As Worksheet Set wks = ActiveSheet
Have 2 workbooks very similar and need to copy a working user form to newer workbook. Exported and Imported the user form to the new VBA project but can't figure how to bring user form into the new worksheet.
how you would write a macro to move a selection of sheets to a workbook called Digi's in the D drive. Also if there isn't a Workbook called Digi's already it needs to add one. I've found some code to loop through sheets but nothing to show what sheets the user has selected
I'm using a worksheet as a surveying program. I need to be able to enter a cell reference in my "input cell", ie "=A11". Then in cell the the right of the input cell I need "=B11" to be entered. And in the cell to the right of that, I need "=C11", and to the right of the I need "=I11". I can get so far working with one cell at a time.
If I enter "=A11" in T3, in T4 I can enter: =IF(T3=A11,B11,IF(T3=A12,B12,IF(T3=A13,B13..and so on. But 8 conditions is all I can enter before I get a message saying that the formula uses more levels of nesting than are allowed in the current file format. And I need to be able to enter at least 50 conditions in 3 adjacent cells.
I am using this code to copy columns C,D, and P from a user selected workbook into position C,D,E of workbook "Checklist.xlsx" (the one from were I run the VBA code). I don't have a clue about VBA, just have been gathering info, but the code works pretty fine. The only issue is that it opens twice the workbook "wbExt" hence the system prompts me if i want to reopen the already open workbook.
Some questions:
1) Is there a way to copy the 3 columns at once? something like "Columns("C:D, P").Select". 2) Is there a way to select the workbook from were to copy the column without needing it to actually open? 3) is there a way to paste the columns starting from row 3 instead of row 1 (Range("C1").Select)?
If the user inserts a row, I want all formatting/formulas/data validation from the row above to be inherited in the newly inserted row. I want this to occur on sheet1.
When you insert a new row, although the entire new row is selected, the active cell is the cell in column A. So I figured I could base a routine off of the active cell. Here is what I tried:
[Code] .....
I am trying to reference a range. The first cell in the range is above the active cell. The second cell in the Range is above, the active cell, then to the right of the range, then down one. By referring to this Range, I am then trying to use the FillDown method. This code isn't doing anything.
Also, I need Excel to automatically run this code when the user inserts a new cell on sheet1. Would I need an event handler or just put this code inside of the Sheet1 code window?
If possible could someone please help with changing the below code so that column "D" in the rngIn part of the code can be a variable. i.e so the user can select one, two, three or four columns (with visible data) to be copied. The "b3" part is a constant.
In the attached file, I want to have the user select a receipt # and have it copy the information, for that receipt from the log, to the receipt tab. Then I want it to print the receipt. The macros that are in the file already, were created before I added a column for Receipt No., and don't ask for user input. File is attached.
I have a worksheet that contains about six different tabs. When this form is completed some users might want to have certain tabs copied into a different workbook. Unfortunately each user might want to copy different tabs. I was wondering if there was a Macro that I could write that would ask the users which tabs they want to copy into a new workbook.
I have managed to write a macro that almost does what I require, but it inserts the copied row at the end and I want it to insert before the row it's just copied. Any ideas how I can modify the code to do this?
The example file gives a better visual explanation. Just want to copy a range of cells by pressing a command button. However I want the macro behind it to ask the user which set of rows to copy.
I cant seem to get to work together in the same macro but that work great seperated. I need them to be in the same macro. The first just simply copy's text from one workbook to another:
Sub Test2() ActiveSheet. Range("a1").Copy _ Destination:=Workbooks("punchlist.xls"). Sheets("Sheet1").Cells(Rows.Count,1).End(xlup).Offset(1,0) End Sub
That worked ok but I needed to change it to the "active cell" instead of cell "a1". So then this line of code was made:
Dim userInputCell As Range
On Error Resume Next Set userInputCell = Application.InputBox("Use the mouse to select a cell on any sheet", type:=8) On Error Goto 0 If userInputCell Is Nothing Then MsgBox "Cancel pressed" Else Msgbox "You selected " & userInputCell.Address(,,,True) End If
The second code works just the way I want it but it doesnt copy over the text to the other workbook. I assume the 2 codes need to be together but I cant get it to work without errors. I also need the text to copy over without changing the borders on either workbook.
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet. Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
I would like a macro which copies this formula across the same row.
However, the macro should prompt the user to select a range.
Based on the range selected and in particular the columns in this selected range, I would like the macro to copy the formula only for the columns specified in the selected range.
I have looked through the forum and found pits and peices but can not put the puzzle together. Found the VBA code in my example from a earlier post but there was no final answer to the post.
Trying to have the user put in a date range via command button. Fro mthis date range the data thats falls within that range is copied to a report sheet. Will also need to have all the old data from a earlier querry removed. Have attached example sheet.
