If possible could someone please help with changing the below code so that column "D" in the rngIn part of the code can be a variable. i.e so the user can select one, two, three or four columns (with visible data) to be copied. The "b3" part is a constant.
View 14 RepliesI have a cell B10 which contains a formula.
I would like a macro which copies this formula across the same row.
However, the macro should prompt the user to select a range.
Based on the range selected and in particular the columns in this selected range, I would like the macro to copy the formula only for the columns specified in the selected range.
This code works fine if i use static ranges, but i would like the user to input the column in which the data is stored.
'Get data for the locations of the gaming license numbers needed for the comparison
varPlayerHost = InputBox("Please enter a single letter for the" + vbCrLf + _
"Column that the Player Host License" + vbCrLf + _
"numbers are in.", "Player Host Number Location", "H")
varHostLicense = InputBox("Now enter the column letter for the copied employee" + vbCrLf + _
"license numbers", "Employee License Number Location", "U")
'Set the ranges for the data to be compared
'This is where I am getting the error???
Set rRangeA = Range([varPlayerHost,1], Range(varPlayerHost, 65536).End(xlUp))
Set rRangeB = Range([varHostLicense,1], Range(varHostLicense, 65536).End(xlUp))
'The actual comparison and deletion of record that match the license numbers copied.
'When this function finishes you will be left with a spreadsheet that only has patron
'information left for the patrons that have an invalid host number.
For Each rCell In rRangeA
If WorksheetFunction. CountIf(rRangeB, rCell) > 0 Then
rCell.EntireRow.Delete
End If
Next rCell
This exact code is kicking an error
"Run Time error 1004"
"Method 'Range' of Object '_Global' failed"
Not quite sure where i went wrong.
I'm using a worksheet as a surveying program. I need to be able to enter a cell reference in my "input cell", ie "=A11". Then in cell the the right of the input cell I need "=B11" to be entered. And in the cell to the right of that, I need "=C11", and to the right of the I need "=I11". I can get so far working with one cell at a time.
If I enter "=A11" in T3, in T4 I can enter: =IF(T3=A11,B11,IF(T3=A12,B12,IF(T3=A13,B13..and so on. But 8 conditions is all I can enter before I get a message saying that the formula uses more levels of nesting than are allowed in the current file format. And I need to be able to enter at least 50 conditions in 3 adjacent cells.
I have managed to write a macro that almost does what I require, but it inserts the copied row at the end and I want it to insert before the row it's just copied. Any ideas how I can modify the code to do this?
I'm trying to get a users' selected range to display in a cell as stored text.
therefore, If a user selects A1:D7. The text in Cells("G", 10) will be:"A1:D7"
w/o the quotes.
I've attached an example workbook.
Here's the formula thus far:
Sub SelectRangeBox()
Dim rnBody As Range
Dim vaMsg As Variant
Do
vaMsg = Application.InputBox( _
Prompt:="Please enter the message-text:", _
Title:="Message", _
Type:=2)
Loop While vaMsg = ""................................
Actuall maybe my thread should be Titled. user selected cell range displayed in input box save to cell as a text value.
I have searched for code in the forum to help me here but could not get any of the possible choices to work for me. I have a spreadsheet that is password protected but would like the user to be able to change the color of the fonts based on the user's choice. The protected page (one of many in the spreadsheet) has various cells that are unlocked so that the user can enter data. The rest of the page is locked. I have allowed all users of the worksheet to Select Unlocked Cells only. I have attempted to allow them to Format cells as well, but each time the program is re opened this feature is no longer working. (The program has a macro that ensures it opens in protected mode each time.)
So I would like to set up a Macro that allows the users to set the color of 6 rows and 5 columns based on their choice. An example of the configuration is:
1234Color Choice
A11016221
B21117232
C31218243
D41319254
E51420265
F61521276
Using the above format, I am imagining the I would have a Key with color codes (using the ColorIndex Properties). The user would type in the appropriate number for each row and click a button and the rows (5 cells each) would change to the selected color.
I have a range of cells that I want to sum based on a range inputed by the user. The range begins with cell c27 and ends with cell au27. I want the user to be asked the beginning cell and ending cell of the range they want to sum and then output the answer.
View 4 Replies View Related I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
Sometimes data comes in with various columns that need Concatenate.
I need VBA to prompt user to input which columns to use inside the formula:
Code:
'Place formula into A2
Range("A2").Select
ActiveCell.FormulaR1C1 = "=COCATENATE(D2&"_"&E2)"
'VBA to copy down formula until last row In my macro, D & E will vary, is there any way to make excel ask which two??
I have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
I have a few questions here.
1) Can a userform procedure be place in the midst a larger macro, so that it can get input from the user before running the rest of the macro? ie If the user leave the input field blank, the macro will exit will a msgbox.
2) I have a range(A1:A3) that i want my userform to display. This range is dynamic. The user will require to input the corresponding country next to it. how do i code the this? I will need to use a listboxes and textboxes right?
for example: userform shows city on the left, user will need to input the country on the right.
A1 - California (user input on the right)
A2 - Shanghai (user input on the right)
A3 - Mumbai (user input on the right)
I would like to delete a column using data validation list. for example :
i have a data validation INPUT list in cell A1 (Part No., Supplier 1, Supplier 2, Supplier 3) the heading start from B2,C2,D2,E2,F2. If user select Supplier 1 from data validation list in cell A1, the column Supplier 1 [c2] should be deleted.
And/or also if in cell B1 have a data validation INPUT row list (Part no.) & if user select part no.,
the selected part no. row should be deleted.
I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
I am trying to check a user input to see if the user has entered the date correctly. I am using the code below but it keeps giving me a "Type Mismatch" error.
View 2 Replies View RelatedBelow is the current code I have for File Copy before the workbook closes. This file will be distributed all over and obviously will not have the same old path and new path locations as I have in my code also will not have the same file name. Is there anyway to still perform the file copy without knowing the old path and file name and possibly have message box pop up to ask the copy to location and use that in the new path string?
Sub Macro1()
Dim fs As Object
Dim oldPath As String, newPath As String
oldPath = "I:EXLDATAMC Daily" '<---Where the file is currently located
newPath = "H:South RegionOrlando Mail Services2008DI" 'Since the super shared drive is super slow we will just copy and replace this file each time before we close and of course after we save
Set fs = CreateObject("Scripting.FileSystemObject")
fs.CopyFile oldPath & "" & "OrlandoMail.xls", newPath & "" & "OrlandoMail.xls"
Set fs = Nothing
End Sub
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
Is it possible to use an input box so a user can copy rows from a particular row to the last row that has data in it?
e.g row 23 & copy all rows from 23 to end od date (and then paste them to another location - e.g. nother sheet at the next empty row.
I'm creating a macro that creates a co-ocurrence matrix from variables that are adjacent to each other.
In order to proceed, I need to know how to return the column number of the first (leftmost) column in a range that the user selects.
I know it's very simple; I'm obviously a beginner. What I would like to do is to have an input box prompt me and then take these values and paste them into columns. One value for each column. Ideally what I would like to have happen is for the values input into the inputbox to be pasted to specific cells. I have attached an image for reference. The beginning of the range B10 and C10 will be fixed but the ending cell range B14 and C14 will be variable based on the number of entries; essentially one less than the total number of forms on row 15.
View 11 Replies View RelatedI cant seem to get to work together in the same macro but that work great seperated. I need them to be in the same macro. The first just simply copy's text from one workbook to another:
Sub Test2()
ActiveSheet. Range("a1").Copy _
Destination:=Workbooks("punchlist.xls"). Sheets("Sheet1").Cells(Rows.Count,1).End(xlup).Offset(1,0)
End Sub
That worked ok but I needed to change it to the "active cell" instead of cell "a1". So then this line of code was made:
Dim userInputCell As Range
On Error Resume Next
Set userInputCell = Application.InputBox("Use the mouse to select a cell on any sheet", type:=8)
On Error Goto 0
If userInputCell Is Nothing Then
MsgBox "Cancel pressed"
Else
Msgbox "You selected " & userInputCell.Address(,,,True)
End If
The second code works just the way I want it but it doesnt copy over the text to the other workbook. I assume the 2 codes need to be together but I cant get it to work without errors. I also need the text to copy over without changing the borders on either workbook.
I 'm trying to do one macros where the user has to choose the column where he wants to work, to avoid the user start counting the number of the letter that corresponds in the alphabet, I would like to make it easer, because working with column numbers when programming is easier, but in terms of user is easier to work with letters
View 8 Replies View RelatedI have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
I have looked through the forum and found pits and peices but can not put the puzzle together. Found the VBA code in my example from a earlier post but there was no final answer to the post.
Trying to have the user put in a date range via command button. Fro mthis date range the data thats falls within that range is copied to a report sheet. Will also need to have all the old data from a earlier querry removed. Have attached example sheet.
How do I pause my macro until the user selects a chart in the worksheet? Or Keep prompting a message to the user till he selects the chart and when a chart is selected run the macro.
Step 1: Check if a chart is Selected
Step 2: If yes, run the macro
Step 3: If no, prompt the user with a msgbox of Retry/Cancel.
Step 4: If the user selects Retry, wait till he makes a selection.
Step 5: If the selection is a chart, run the macro. If the selection is not a chart prompt the same msgbox again and keep looping it till he selects a chart.
Sub test5()
Dim chtSelected As Chart
Dim UserResponse As Integer
On Error Resume Next
Set chtSelected = ActiveChart
[Code] .....
I would like to do a Macro which requires user to go to a specific line which is variable in each work sheet. I would like to be able to enter the number and then delete all lines below that point and then continue with the balance of the macro.
Is there an easy way to pause the Macro and then restart it? Or is there a code that I can insert in the Macro to locate a specific Cell and then delete all lines below the next line?
In my macro, I'm trying to use an input box to determine the factor to multiply another cell by. I also want to only allow entry of 6.0 or less, and only allow, (but not require), a single decimal place. Here's what I've got so far, but it's not working:
View 2 Replies View RelatedI would like to make a button on my toolbar that will let me autofill whatever cell I've selected down to whatever row I designate. I would like to have a user input where you put in the row number and it autofills whatever formula down to that row in the column selected.
I know how to do a normal autofill, but I don't know how to do a user input or have it input into the autofill process.
If anything else is entered into the input box a message box (MSGbox) with a vbCritical button will appear with the following prompt "You entry (insert entry data here) is inccorect." I don't know the code for "insert entry data here".
View 4 Replies View Related I would like a cell to have user input. If there is no input then the cell should reference a value in another cell. My strategy was to use a formula in another cell to check to see if the user input cell was empty. If it was empty then the formula propagated the cell. If it had user inputted data then it stayed like it was.
Here is an example:
Begin Invent
1000
Gallons
End Invent
User input or
formula here
Gallons
Received
Gallons
Used
Gallons
I want the user to be able to input a value for the End Invent cell right below 1000. If there is no value I want that same cell to mirror the cell above it with the 1000 in it.