Copy Data Based On Date Range Put In By User For Report
May 16, 2006
I have looked through the forum and found pits and peices but can not put the puzzle together. Found the VBA code in my example from a earlier post but there was no final answer to the post.
Trying to have the user put in a date range via command button. Fro mthis date range the data thats falls within that range is copied to a report sheet. Will also need to have all the old data from a earlier querry removed. Have attached example sheet.
View 9 Replies
ADVERTISEMENT
Jun 20, 2006
What i want to do is copy all records from whatever date i enter, onto sheet test. The full excel file has over 80 worksheets for each individual rep, the example i attached has 8 sheets..
View 9 Replies
View Related
Aug 5, 2010
I am looking for code that can generate the report that a user selects.
For example the user clicks reports on the userform. The report userform opens up. The user checks the monthly report button and enters the last day of the month he wishes the report to be for. i.e 7/31/2010 and then clicks generate report. when executed excel creates a new workbook and creates two sheets. the first looks exactly like the master data sheet from the original worksheet but of course with the specified data. the second sheet will populate a summary of the data. I will address that after i figure out how to get the first sheet compiled.
View 1 Replies
View Related
Mar 5, 2014
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
View 1 Replies
View Related
Apr 4, 2008
I have a cell B10 which contains a formula.
I would like a macro which copies this formula across the same row.
However, the macro should prompt the user to select a range.
Based on the range selected and in particular the columns in this selected range, I would like the macro to copy the formula only for the columns specified in the selected range.
View 9 Replies
View Related
Jul 2, 2008
How do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.
View 4 Replies
View Related
Apr 14, 2014
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
View 11 Replies
View Related
Feb 3, 2014
I have a bunch of open files with dates in cell A3. I want to copy the range starting in A7 (the same range and size in all the open files) and paste it into my vbafile based on matching the date (in row 11). I have a spreadsheet attach with an example of what the code would do for Jan 1.
View 5 Replies
View Related
Jul 8, 2013
I am trying to COUNTIF some data from a spreadsheet I have, where they have been entered after a certain date (which is part of the information). The problem I am having is that I am trying to enter the date I want as a variable in another field so that it can update the rest of the table.
Basically I have a field where it says "Calculate new business since" and then a date should be entered - in turn the formulas should make the calculations based on that date. Is this not possible?
View 2 Replies
View Related
Jan 22, 2008
I have 2 ranges: 1."Task info" (4x4 range)
2." Dates" (24x2 range)
I have one variable cell ref: "Date1" (a date)
Based on "Date1" I want to copy the value in the "task info" and Paste special value that is next to the corresponding date in "dates".
View 4 Replies
View Related
Jul 17, 2013
I have 2 sheet in MS Excel (MATTER & REPORT) . Database included at sheet MATTER. Report will be seen on sheet REPORT based on entry date. What formula used to produce report automatically.
View 4 Replies
View Related
Jun 20, 2013
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
Budget Picture.jpg
View 12 Replies
View Related
May 8, 2009
This spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet:
With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well.
I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
View 7 Replies
View Related
Apr 24, 2014
This code basically copies data from one worksheet to another worksheet based on the date and works great.
However, I have been asked to changed the format of the spreadsheet and the code needs to be changed. The code is in "This workbook".
The code takes the data from the summary tab and copies it to the archive tab. I now need it to take it from the summary tab and copy it to the archive 2 tab.
I have attached a copy of the spreadsheet. Data and Archive2.xlsm
View 8 Replies
View Related
Feb 8, 2010
I have the following code that performs a row copy based on selected dates which is then pasted to another sheet as a report. I need to also perform the same copy from another sheet with the same structure so the All_Report contains the data from both sheets. The name of the other sheet to copy the information from is "Closed_Requests".
View 10 Replies
View Related
Mar 22, 2008
I am trying to build a summary report that pulls from two different worksheets within the same workbook. Here's the context of my problem:
Worksheet 2: Column A has a list of dates. The corresponding information for each date is within the row. Sometimes, there are repeated dates with different corresponding information.
Worksheet 3:This is my summary sheet. This report needs to update daily and only pull data related to "today's" date. My question is if i have three rows with the same date but different data, how do i tell my summary sheet to display all three rows for that date. So far, I can only get it to pull the data from the last row with that date.
View 3 Replies
View Related
Aug 30, 2013
I have two worksheets in my report cards:
1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.
Student
Math
Reading
Science
Jimmy
75
84
100
[code].....
2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.
Student Name
=Data!$A2
Math
=Data!$B2
Reading
=Data!$C2
Science
=Data!$D2
How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?
I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.
View 1 Replies
View Related
Apr 22, 2014
I'm compiling data from field reps that comes in a big spread sheet. I want to pull the rows out that fall into a certain date range. For example, if it falls between January and March. How would I do this?
Company 1
3/5/14
$54,000
Q1
Phase I
10%
Company 2
2/1/14
$16,000
Q4
Phase II
80%
Company 3
12/1/13
$18,000
Q2
Phase I
20%
View 4 Replies
View Related
Mar 4, 2013
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
View 5 Replies
View Related
Apr 8, 2012
copy the excel sheet data from one sheet to another sheet?
-> I have one excel sheet (name: Test.xls, sheet name: SHEET1)
Sn Code Type next calib
5BPR CORR7-Apr-12
4BPR CORR7-Apr-12
73BPR CORR7-Apr-12
9BRG CORR8-Apr-12
10BRG CORR8-Apr-12
11BRG CORR8-Apr-12
17BRG CORR9-Apr-12
311DP CORR9-Apr-12
227DP CORR9-Apr-12
227DP CORI R9-Apr-12
Want to create a new work sheet and copy the today's date(next calib - filed name) records to new sheet.
Example: Today's Date is 8-Apr-12
So, I want to copy following record to new work sheet (when I click the button / run the macro).
Sn Code Type next calib
9BRG CORR8-Apr-12
10BRG CORR8-Apr-12
11BRG CORR8-Apr-12
View 3 Replies
View Related
Jul 22, 2014
I got a very technical sheet which needs your experience to work.
open the attached file below to see the workbook.
It has 3 different sheets. "RESULT", "INPUT" and "SWITCH"
On "RESULT" Cell (O11) is where the person would put a Reference.
This reference is then checked on the "INPUT" sheet column A.
From the first cell it appears in Column A, until the last cell it appears in Column A should be the Row Range (Blanks included).
But I want that range (Column A to G) to be copied to "Switch" sheet. Pasted in Cell A1 downwards.
In the "SWITCH" sheet I have already given all the GREEN Cell formated areas a name - INFO.
I want all the data in INFO to be inserted into "RESULT" sheet between row 18 and 19.
I have colour coded most of the areas for you.. And added a button from which the Macro / VBA should run when clicked.
View 1 Replies
View Related
Jun 15, 2006
I am trying to make Excel pull data out of a closed file based on a date range. The closed file is a log where people input data and enter the day they are doing it. I need to pull this data in my file and make it print into my worksheets so I can pass a report on to others with only the data they request from the log.
The range would be for 7 days and would have to be able to choose a few columns off this report.
View 9 Replies
View Related
Feb 1, 2008
The module that you wrote on tracking changes made in a workbook was fabulous I had been looking for so long for that. I was just wondering if there was a way to find out WHO made the changes to the workbook. I am on a network and everyone in my office can make changes to this particular workbook, therefore there are some mistakes. I would like to know who is making the mistakes.
Dim vOldVal 'Must be at top of module
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim bBold As Boolean
If Target.Cells.Count > 1 Then Exit Sub
On Error Resume Next
With Application
. ScreenUpdating = False
.EnableEvents = False
End With
If IsEmpty(vOldVal) Then vOldVal = "Empty Cell"
bBold = Target.HasFormula
With Sheet1.............................
View 4 Replies
View Related
Sep 18, 2009
I am trying to develop a macro that allows the user to copy and paste a set of date and time values, move them to the next sheet and increase the month by 1. I need help trying to find out how can I create a counter for the program to keep running without the need to reprogram the macros again.
View 14 Replies
View Related
Dec 27, 2007
I have managed to write a macro that almost does what I require, but it inserts the copied row at the end and I want it to insert before the row it's just copied. Any ideas how I can modify the code to do this?
View 9 Replies
View Related
Feb 10, 2013
I have a worksheet called "Lookup" with several dynamic named ranges (each is 1 column wide) including facility, department, shift, etc. On a summary worksheet in the same workbook I want users to use a dropdown or combo box (don't care what type) in cell B2 to select a facility and then based on their selection, copy the department named range data and paste it into the summary sheet beginning in cell A5 and paste the shift named range data into the summary sheet beginning in cell B5.
Example: user selects "AR Plant" from the dropdown or combo box and the data from the "AR_Rpt" named range is pasted into cell A5 and the "AR_Shift" named range is pasted into cell B5.
View 9 Replies
View Related
Sep 4, 2006
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
View 9 Replies
View Related
Apr 9, 2009
If possible could someone please help with changing the below code so that column "D" in the rngIn part of the code can be a variable. i.e so the user can select one, two, three or four columns (with visible data) to be copied. The "b3" part is a constant.
View 14 Replies
View Related
Jun 18, 2014
I developed some pivot table reports and macro'd out pdf'ing them for the users but now management want the users to be able to manipulate the data themselves !! The file is 31 sheets and I'm figuring they'll only want to see the sheets that are relevant to them so is there a way to macro it out?? Perhaps when the file opens it asks, "Who do you want to see?" Jack? Joe? or Rudy?, Month or YTD, or Both? or Everything? and it will hide the sheets that are not selected. The words "month" and "YTD" is in Cell "N1" and the individuals names are in Cell "M1".
View 6 Replies
View Related
Mar 19, 2012
I have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
View 1 Replies
View Related
