Using a Command button into my Master file, I'm looking for a code that give me an option to select an existing file that will have a variable name & path, open it and then copy all worksheets contained within it, into my Master workbook. Then close the selected file on completion.
Not sure if it's important but some of the copied worksheet names will contain copies. e.g. Apples, Apples (2), Pears, Pears (2). etc.
I have a report(Input report) with multiple sheets with different worksheet names.
Now I have to select 2nd worksheet of input report and copy a certain range values and paste in the other workbook(output) . From the same sheet 3 diffrent values I will copy and paste in other work book.
Now, I have to come back to the input report and go to next sheet and copy the same range data and append to the out put report below the first sheet.
This I need to do for all worksheets for the input report worksheets (there are more than 100 worksheets)
[code here]
VB:
Sub testtest()
'
'
Dim ws As Worksheet
[Code].....
I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)
I am unable to write the code myself as I have never worked on VBA and am only a beginner.
Part I:
The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.
Part II:
Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.
Also some of the rows and columns are merged.
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
I think this needs a For Each loop, but I am stuck on how to get it accompished. In the folder I will have about 26 workbooks with all different titles, but the beggining is always the same for the workbook and the worksheet (Bldg). There will be only one ws per wb and the wb I am using to collect all of the worksheets is Final.xls. The code attached works fine, but the only way right now I know how to capture the next wb/ws is with a call.
Sub CopyAllWrksht() ....
There are 7 files on the network that everyone updates. These are contact databases for clients, insurance companies, our agents, etc. Any changes that need to be made are made. The first person to open a file will get edit mode, the others will only get read-only mode. I rarely have to edit, so if I'm first then I'll invariably be asked to exit so others can update them. I've tried doing the share workbook, but it's not working. That's not what I'd like to do anyway.
I've made a workbook with 7 different sheets, each tab named after one of the network databases. I'd like for these sheets to automatically update if/when changes are made to the master - but keep my formatting intact. Right now I'm relying on import external data, but that doesn't update. Therefore, I have to delete and re-import every morning, losing all of my formatting. Surely Excel has an easier way to do this?
The databases are highly sensitive information so I can't really attach one - but I will attach a dummy example of what they all look like. Each file is hundreds of rows and maybe 15-20 columns, so the thought of linking each cell is more than I'm looking to do.
l need to consolidate up to 3 columns of data from a varied number of worksheets within the same workbook. The sheets are (format/layout) structured in the same way. The columns need to get added next to each other in the consolidation sheet.
View 9 Replies View RelatedI have a master workbook with 20 worksheets. 5 worksheets in the worksbook are distributed to field reps, but the remaining 15 worksheets are not. What is the best practice for receiving the 5-worksheet workbook from the field rep and importing the data into the 20-worksheet master workbook? If I merely use Copy Sheet I am able to copy the worksheets into the master workbook but then I have to remove the pathname references in each of the copied worksheets in order to map the data in the master workbook - which is quite cumbersome.
View 9 Replies View RelatedI have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.
View 9 Replies View RelatedI am working with a workbook that i have created. The workbook has around thirty worksheets all with the starting nave of "DIV". I have a code that will loop throught the wrok book and copy the used range and insert them into a master. However what i need is a code that will loop through the wroksheets and only copy the used range only in columns A:P and starting in row 10 (i have headers from row 1-10). I have columns beyond "P" that has working information for that worksheet and do not want to copy it over to the master.
View 12 Replies View RelatedI have multiple workbooks ( with unique names) under same folder. Each workbook has "Report-Corn" sheet.
I would like to copy cell "P15" from each (workbook-> report-corn -> P15) and paste to Master.xls workbook -> Sheet 1 one after another which is also located under same folder.
I wanted to know if there is any way possible to get vba to insert a formula in a cell to each worksheet in each workbook in a folder and then using loop to extract all the info from each worksheet of each workbook in same folder into a master workbook?
View 1 Replies View RelatedI have been at this for days and i can't quite get it right.
I have multiple worksheets of clients all formatted the same.
I need a Macro/VBA that will take from Each sheet onto a master sheet the Name of the Client(Cell I1 from the sheet)
Under the name I need the text Authorization #: then the data(C3)
Under that I need the text Dates of Service Expiration: then the data (D5)
Then the text 90801 Balance: then the data from (C30)
Then the text 90806 Balance: then the data from (F30)
Then the text 90847 Balance: then the data from (I30)
Then the text 90853 Balance: then the data from (L30)
Then a couple Spaces then the same exact data from the next sheet...till all the work sheets are done.....is it possible?
Dave responded by suggesting the following:
Sub CopyFromAllSheetsButMaster()
Dim wSheet As Worksheet
Dim wsMaster As Worksheet
Set wsMaster = Worksheets("Master")
For Each wSheet In Worksheets
If UCase(wSheet.Name) <> "MASTER" Then
With wSheet
.Range("I1").Copy _
Destination:=wsMaster.Cells(Rows.Count, "A").End(xlUp)(2, 1)
'More Copy Method code here
End With
End If
Next wSheet
End Sub...
I want to take values from several worksheets within one workbook and put them into a list ie.. a workbook with 200 worksheets each one a different invoice. Each invoice has an invoice number, po number, supplier, and total. I want to create a worksheet that will list the above information from each worksheet.
View 5 Replies View RelatedI am searching for a formula or simple macro to select text data from column named "SM NAME" to corresponding worksheet. I need this to populate as many worksheets as there are SM Names. ( there are usually 10 SMs)
For Example in the Master Data there are Several SM names listed. I need to extract the "ID" and "Agent" columns in the Master and populate into the workshhet with the Approriate name tab. The Master list changes regularly.
I have 600+ variations of the same workbook. Contained within each workbook is a worksheet, from which I need to copy and paste a range of cells into one "master" workbook. For example, in workbook 1 I need to copy rows 2:5 and paste that into the master workbook in cells 2:5. Then I need to open workbook 2, copy rows 2:5 and paste them into the master workbook starting at row 6. I have fumbled my way through everything except the pasting part into the Master workbook.
I'm unsure how to adapt the code to suit my needs.
I have an Excel workbook that is created a few times a month from a template. When I update it I run a macro that saves a values only copy with the current date. I'd like to copy non-blank rows (from row 8 down) into the first empty row in a master workbook that is saved on a network drive. The path to the master workbook is "B:8MPBGTrade Pre-AdviceBG Trade Confirm Master.xls"
I have got a file with a lot of different workbooks
What i want to do, is open each one of them, copy a range of cells, for example E4:E15, then open the "master" workbook, look in row 4 which cell is empty and then paste the data there
i know how to copy-paste from one workbook to another, i am just not sure how to do it for more than one workbook.
My excel database has a master sheet where all data is included. It consists of 8 columns with two rows of headers (1st row: Sheet title, 2nd row: Categories for the columns like, name, salary, emp. start date, Boro,emp. number...etc.
Master sheet aside, I have 12 other sheets in the same workbook (Feb-Jan), we run a fiscal year, not calender. The data that is included in the master sheet needs to copy over to the corresponding worksheet sheet month as long as the date in the emp. start date falls with the month range. For example, if my master sheet has data in rows 4,5,7,9,19,23,101...600 and the emp. start date is in the range of from June 1st, 20xx through June 31st, 20xx then all the data in that row should copy over to the next available row in the month of June's worksheet. The same should happen the months of Feb - Jan.
I had to copy data from child woekbooks (*.xls) and paste it to the master workbook with same page to page every time when a macro is executed i had done the copy and paste part
But I'm Facing the problem in which i had to deal with
Validations as on both master and child sheet validation (column based combo box is activated )
one is worktype
2ns is time type
i jst had to copy data to the master macro works perfectly fine but the problem is that a msg box appears which signifies that i had to change the name (version ) for both types when i click yes 2 times it pastes the data
I'm attaching my macro as well as pic of that msg box with this attachment
I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following
1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from.
2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook
3. Copy over all rows that contain the word "down" under column D titled Operational status
The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.
I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
View 4 Replies View RelatedI get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I am trying to code a Macro so that i can take all the worsheets and save them as individual Workbooks. I wrote a macro that appeared to work, but, after it saves the first sheet as a workbook, i get a debug error.
MS VB Script error:
Runtime error '9':
Subscript out of range
Any advise would be greatly appreciated.
Thank you
Code is below..
Sub saveall()
'
'
For Each ws In ActiveWorkbook.Worksheets
ThisFN = "C:Documents and SettingsUserDesktop" & ws.Name & ".xls"
I = I + 1
Sheets(I).Select
Sheets(I).Move
ActiveWorkbook.SaveAs Filename:= _
ThisFN, FileFormat:=xlNormal, _
Password:="", WriteResPassword:="", ReadOnlyRecommended:=False, _
CreateBackup:=False
Next ws
End Sub
I have a workbook containing several worksheets I want to copy to a workbook of their own and save under a specific name/password through a macro.
However, I have five difficulties:
1) I want to new workbook to contain only 1 worksheet. So, only the worksheet copied from the original workbook, and no other worksheets.
2) I want to be able to manually select the destination file for the copied workbook, however. This should be the same file for all workbooks.
3) I want the data copied from original worksheet to be ‘pasted as value’ only, so no formulas in the new workbook.
4) I want the new workbook to be read-only. Therefore I want the workbook to be /locked and password protected. So, the password should be only for altering cells, not for opening the workbook. See also point below.
5) Regarding the naming and passwording part I have made a matrix table in a worksheet named: “Rekeningen” (this worksheet is in the original workbook). This table contains three columns:
Column A, cells 40:65, contains the names of the worksheets I want to copy
Column B, cells 40:65, contains the names of the new workbooks
Column C, cells 40:65, contains the passwords of the new workbooks
So for example ....
Assume 2 Workbooks - the Active one and "Book2".
I mannaged to copy ALL the sheets from the ActiveWorkBook to "Book2" with the following code - but as you can see the code copies each of them AFTER the last sheet in "Book2".
Sub Copy_Sheets()
' Copy All sheets from ActiveWorkbook to "Book2.xls"
For Each SH In ActiveWorkbook.Sheets
SH.Copy After:=Workbooks("Book2").Sheets(Workbooks("Book2").Sheets.Count)
Next
End Sub
How can I copy them to "BEFORE", lets say Sheet(1) in "Book2" ?
I tried to change the SH.Copy command to somthing that sounds logic to me, such as:
SH.Copy Before:=Workbooks("Book2.xls").Sheets(1)
but got the: "Run-time error '9' - Subscript out of range".
I want create a macro which will extract 6 values (see below) from a workbook tab called summary to an master workbook for reporting purposes. Each workbook has a unique file name e,g ACI1150.
Values on sheet SUMMARY:
A1
A2
A3
G21
G24
G26
I tried to adapt the below to get one item copied/extracted. However it would no work.
I am new to using macros
Sub GetG26s()
Dim MyDir As String, FN As String, SN As String, NR As Long
Application.ScreenUpdating = False
I have 16 proposals that are either hidden or visible in a proposal generator. I need to be able to copy only the visible worksheets over to a new workbook that uses a name from a cell inside the proposal generator. Then a save as prompt to force the user to save the file wherever they choose.
View 14 Replies View RelatedI have developed a macro, run by a button click, in my workbook.
I have about 5 other workbooks to process, what I want to do is to have my workbook with my macro open, then either copy or import these other 5 workbooks, one at a time, into my current workbook so I can run my macro on their data. Not sure if I need to copy them in or not, but thats all I can think of. I'm not even sure how to do this manually, I tried having my workbook open and doing a file - import on the .xls file, but it seems to be translating my data and I'm ending up with a value of 'f1' in one of my columns, no idea what that is. All I really want to accomplish is to run my macro on each of the 5 workbooks, one at a time.
All i need to do is copy all worksheets in lots of workbooks into one workbook with multiple sheets, easy right!!
View 2 Replies View Related