Copy Data From Different Workbooks / Worksheets And Paste In Master Workbook?
Apr 29, 2014
I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)
I am unable to write the code myself as I have never worked on VBA and am only a beginner.
Part I:
The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.
Part II:
Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.
Also some of the rows and columns are merged.
View 9 Replies
ADVERTISEMENT
May 25, 2009
I had to copy data from child woekbooks (*.xls) and paste it to the master workbook with same page to page every time when a macro is executed i had done the copy and paste part
But I'm Facing the problem in which i had to deal with
Validations as on both master and child sheet validation (column based combo box is activated )
one is worktype
2ns is time type
i jst had to copy data to the master macro works perfectly fine but the problem is that a msg box appears which signifies that i had to change the name (version ) for both types when i click yes 2 times it pastes the data
I'm attaching my macro as well as pic of that msg box with this attachment
View 6 Replies
View Related
Sep 20, 2012
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
View 4 Replies
View Related
Dec 14, 2011
I have got a file with a lot of different workbooks
What i want to do, is open each one of them, copy a range of cells, for example E4:E15, then open the "master" workbook, look in row 4 which cell is empty and then paste the data there
i know how to copy-paste from one workbook to another, i am just not sure how to do it for more than one workbook.
View 2 Replies
View Related
Aug 4, 2012
I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following
1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from.
2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook
3. Copy over all rows that contain the word "down" under column D titled Operational status
The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.
I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.
View 2 Replies
View Related
Jul 20, 2013
I have a report(Input report) with multiple sheets with different worksheet names.
Now I have to select 2nd worksheet of input report and copy a certain range values and paste in the other workbook(output) . From the same sheet 3 diffrent values I will copy and paste in other work book.
Now, I have to come back to the input report and go to next sheet and copy the same range data and append to the out put report below the first sheet.
This I need to do for all worksheets for the input report worksheets (there are more than 100 worksheets)
[code here]
VB:
Sub testtest()
'
'
Dim ws As Worksheet
[Code].....
View 4 Replies
View Related
Aug 18, 2006
I have 600+ variations of the same workbook. Contained within each workbook is a worksheet, from which I need to copy and paste a range of cells into one "master" workbook. For example, in workbook 1 I need to copy rows 2:5 and paste that into the master workbook in cells 2:5. Then I need to open workbook 2, copy rows 2:5 and paste them into the master workbook starting at row 6. I have fumbled my way through everything except the pasting part into the Master workbook.
View 9 Replies
View Related
Jan 31, 2010
I am working with a workbook that i have created. The workbook has around thirty worksheets all with the starting nave of "DIV". I have a code that will loop throught the wrok book and copy the used range and insert them into a master. However what i need is a code that will loop through the wroksheets and only copy the used range only in columns A:P and starting in row 10 (i have headers from row 1-10). I have columns beyond "P" that has working information for that worksheet and do not want to copy it over to the master.
View 12 Replies
View Related
May 21, 2008
I want to take values from several worksheets within one workbook and put them into a list ie.. a workbook with 200 worksheets each one a different invoice. Each invoice has an invoice number, po number, supplier, and total. I want to create a worksheet that will list the above information from each worksheet.
View 5 Replies
View Related
Sep 19, 2009
Using a Command button into my Master file, I'm looking for a code that give me an option to select an existing file that will have a variable name & path, open it and then copy all worksheets contained within it, into my Master workbook. Then close the selected file on completion.
Not sure if it's important but some of the copied worksheet names will contain copies. e.g. Apples, Apples (2), Pears, Pears (2). etc.
View 9 Replies
View Related
Jul 1, 2014
I wish to be able to get data from several workbooks (.xls), and gather all the data in one master workbook.
As I said, I've got a number of workbooks with data I wish to copy and merge into one master worksheet. Each workbook contains a sheet called "MILESTONES" (project) in which I want to pick up data. The data ranges from A5:J88, but I think this can be expanded by the users (more rows). There is no guarantee that the users will enter data in all the columns. Columns A and B occur frequently blank, so the users usually starts entering in information in column C (heading = description).
The Master workbook contains of exactly the same headings, except that the columns has been expanded by 1. Column A1 has the heading "Workpack" which is the name of the workbook the information has been gathered from (description is in column D1). This name can be found in a sheet called "REPORT" in all of the workbooks, and I want this to be copied over, row by row so it matches the data. I don't know if it can cause any trouble, but the names are merged through C to J in row 12 in all of the workbooks.
The workbooks (or workpacks) and the master workbook (summary) are placed in the same folder. Let's say C:Project. The workbooks also changes names frequently (each month). Lastly, if there is a way to automatically update the master workbook every time it is opened.
View 5 Replies
View Related
Apr 9, 2014
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies
View Related
Jul 9, 2012
I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.
View 1 Replies
View Related
May 28, 2014
I am trying to automatically transfer data from nonadjacent cells (C1, B5,B10,B16,B22,B28) from multiple workbooks in a masterworkbook folder from A2:F2. I am a novice at VBA. I am not able to copy as Range("C1,B5,B10,B16,B22,B28") and the way it currently is coded only the last copied range (B28) is pasted to the master workbook. The data pastes to A2 in the master workbook instead of F2 where I want it. I need copying the cells from the workbooks into row 2 in the master bookbook. Here is what I currently have:
Sub LoopThroughDirectory()
Dim MyFile As String
Dim erow
MyFile = Dir("C:ToolFolderWorkObjectives")
[Code].....
View 9 Replies
View Related
Aug 2, 2013
I have three source workbooks that needed to be consolidated into a master workbook pasting the data with values & formatting.
The Master workbook also contains 6 additional worksheets that link to the data pulled in from the source files.
My question is how do I write the code so the source files populate the master in a specific order.
For example, the 3 source files are named "Central" "NED" and "WEST" and I need them to populate the master workbook in that order.
This is the code I am using to consolidate the data:
Option Explicit
Sub ConsolidateSheetsFromWorkbooks()
'Author: Jennifer Starr
'Date: 7/12/2013
'Summary: Open all files in a folder and merge data (stacked) on all
[Code] .....
View 1 Replies
View Related
Apr 16, 2014
I have created timesheets for employees that work in our shop. Our company manufactures products for different industries, such as mining, wind power generation, general industrial applications, and so forth. I modified some time sheet templates I found for excel to accommodate our company's actions. Each employee has their own workbook, in which the months are separated into different worksheets. Each sheet is divided further into weeks and in each weekly section the areas of information are divided as follows:
A / B / C / D / E / F / G / H / I / J / K / L / M
Work Sector / Workshop or Fieldservice / Scope of Work / Job # / Reg or OT / Mon / Tue / Wed / Thu / Fri / Sat / Sun / Total
There are 7 workbooks (one for each employee), each with 12 sheets (one for each month). I want to create a master sheet that will pull information from everyone's timesheet if they worked on a particular job. In other words, I would like to type a job number into a cell, then have excel look through everyone's timesheets and pull over only the rows of information that contain that job number
View 12 Replies
View Related
Apr 2, 2014
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
View 12 Replies
View Related
May 8, 2013
All i need to do is copy all worksheets in lots of workbooks into one workbook with multiple sheets, easy right!!
View 2 Replies
View Related
Feb 8, 2009
I have a master workbook with 20 worksheets. 5 worksheets in the worksbook are distributed to field reps, but the remaining 15 worksheets are not. What is the best practice for receiving the 5-worksheet workbook from the field rep and importing the data into the 20-worksheet master workbook? If I merely use Copy Sheet I am able to copy the worksheets into the master workbook but then I have to remove the pathname references in each of the copied worksheets in order to map the data in the master workbook - which is quite cumbersome.
View 9 Replies
View Related
Dec 19, 2013
I have tried to write the below VBA to copy a specific cell to a specific workbook. I have set the folder path in B1 and listed the file names in column E4 onwards. E1 being the number of files in column E. I get a run-time error 91 "Object variable or With block variable not set" on Current File = ActiveWorkbook.name.
Sub UpdateParameters()
Dim CurrentFile As Workbook
Dim wbOpen As Workbook
[Code]....
View 4 Replies
View Related
Mar 14, 2014
I have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.
View 9 Replies
View Related
Oct 7, 2009
I want create a macro which will extract 6 values (see below) from a workbook tab called summary to an master workbook for reporting purposes. Each workbook has a unique file name e,g ACI1150.
Values on sheet SUMMARY:
A1
A2
A3
G21
G24
G26
I tried to adapt the below to get one item copied/extracted. However it would no work.
I am new to using macros
Sub GetG26s()
Dim MyDir As String, FN As String, SN As String, NR As Long
Application.ScreenUpdating = False
View 9 Replies
View Related
Jul 12, 2014
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
View 4 Replies
View Related
May 25, 2014
I have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1
Title 2
Title 3
Title 4
Title 5
A2
B2
C2
D2
E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook #
File 2
File 3
File 4
A2
Title 5
A3
Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
VB:
Sub dAmacro()
Sheets("Workbook1").Select
Range("G1") = "Workbook #"
Range("H1") = "File 2"
Range("I1") = "File 3"
[Code] .....
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
View 9 Replies
View Related
Sep 11, 2006
I am searching for a formula or simple macro to select text data from column named "SM NAME" to corresponding worksheet. I need this to populate as many worksheets as there are SM Names. ( there are usually 10 SMs)
For Example in the Master Data there are Several SM names listed. I need to extract the "ID" and "Agent" columns in the Master and populate into the workshhet with the Approriate name tab. The Master list changes regularly.
View 4 Replies
View Related
Jan 31, 2007
I have created a workbook with vb code that include 4 modules, 1 userform. These all work in the original workbook. When I copy and paste the workbook onto another laptop, none of the scripts work? Both laptops run the same os plus office 2003.
View 2 Replies
View Related
Jul 4, 2012
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
View 2 Replies
View Related
Nov 24, 2012
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
In this folder I have workbooks called:
Function1
Function2
Function3
In each workbook I have 4 worksheets
Cashable12-13
NonCashable12-13
Total12-13
GrandTotal12-13
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
I am using Excel version 2003.
View 1 Replies
View Related
Dec 23, 2011
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
View 9 Replies
View Related
Feb 28, 2013
I want to write a macro that will copy data from all worksheets of a specified workbook and copy them into a new workbook.
To give some detail, I receive a report each morning containing failed deliveries. I also export a list of failed deliveries from a system (SAP). These reports rarely match so I must compare the two daily. I do this using INDEX and MATCH functions but now my boss wants all the data in a single report so I would like to harness the might of vba to consolodate all the data in one workbook.
The lists of failed deliveries are contained in worksheets marked mon, tue, wed... so I need to search all worksheets for all delivery numbers and copy all of the data into a new book. This becomes complicated because on Monday there is only one tab marked mon, on tuesday there are two (mon & tue), one wednesday there are three and so on.
I have started on some code but I am getting nowhere fast. I have managed to muster an input box which asks for a date (this will be used to search the file path for a file named "failed deliveries & "mm/mm/yyy")
View 3 Replies
View Related
