Copy Multiple Values From Multiple Workbooks To Master Workbook
Oct 7, 2009
I want create a macro which will extract 6 values (see below) from a workbook tab called summary to an master workbook for reporting purposes. Each workbook has a unique file name e,g ACI1150.
Values on sheet SUMMARY:
A1
A2
A3
G21
G24
G26
I tried to adapt the below to get one item copied/extracted. However it would no work.
I am new to using macros
Sub GetG26s()
Dim MyDir As String, FN As String, SN As String, NR As Long
Application.ScreenUpdating = False
View 9 Replies
ADVERTISEMENT
Aug 4, 2012
I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following
1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from.
2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook
3. Copy over all rows that contain the word "down" under column D titled Operational status
The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.
I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.
View 2 Replies
View Related
Sep 20, 2012
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
View 4 Replies
View Related
Jun 12, 2013
how to consolidate multiple workbooks into the master workbook? I need to consolidate 12 workbooks into the master workbook every month. The subsidiaries will report me their figures monthly. Hereby attached one of the subsi, "B Co" reporting package, and the master copy "XYZ Holding Co" how it look like. Hence, may I know how to write a macro so that it will auto update monthly when the subsidiaries return me their reporting package, so that I can auto update in my master copy for tab BS and tab PL.
View 6 Replies
View Related
Jul 3, 2013
I need to consolidate a lot of information from multiple workbooks all the workbooks are located in a folder, i am not bothered about running each one separately or a group at a time, each work book has ten sheets with each sheet in the workbook being different, it needs to add to the next blank row on each sheet.
View 1 Replies
View Related
Jul 23, 2013
I would like to merge multiple workbooks into a master workbook. All the individual workbooks are identical and only have 1 sheet, and I would like to append them to the master as worksheets then sum them all together. The front sheet showing the totals from all the merged ones.
View 5 Replies
View Related
Dec 27, 2012
At our small firm, each staff member keeps a small excel spread sheet on the network that contains their "work in progress." This spreadsheet is roughly six columns wide and roughly twenty lines long.
What I am attempting to do is have one "master" spreadsheet with a tab for each staff member that links their "work in progress" so that partners and managers can easily see how much work each of the fifteen or so staff members have.
I can create fifteen different tabs and fifteen different files on the network and link =[Staff1.xlsx]Sheet1!$A$1:$G$25 =[Staff2.xlsx]Sheet1!$A$1:$G$25 =[Staff3.xlsx]Sheet1!$A$1:$G$25 and so on.
If I make a change to the layout of the work in progress sheet, I have to delete and copy the file fifteen times, then go back through and re-link fifteen tabs to fifteen workbooks in order to keep it uniform.
View 1 Replies
View Related
Apr 8, 2014
I'm trying to take a single worksheet from a workbook and merge them all into one workbook. In that master workbook I'm looking to have each of the worksheets on different tabs and the tab names as the original workbook name.
So if I have Workbook1, Workbook2, Workbook3, Workbook4 in a folder. I want to open a new spreadsheet, run this macro, select the folder with the Workbooks in, and have it take the range selected from the worksheet 'other' from each of the workbooks and generate a 'master' Spreasheet where each tab would be called Workbook1, Workbook2, Workbook3, Workbook4 and the contents would be from the 'other' tab
I found some of Ron de Bruin's code online which I've tried to customise.
Currently this takes a range from the tab specified, puts it into an array and then pastes it all into different columns on one worksheet. change this so that it creates a new worksheet for each original workbook, and names it after that workbook.
View 4 Replies
View Related
Dec 24, 2013
Is it possible to VLookUp Data between multiple workbooks (12 different workbooks to be exact) in one master sheet?
I would like the master sheet to find the empty data for the item number. Basically, how can I automatically populate the empty data for each item number in the master sheet. Every item will be different. The 12 workbooks are invoices throughout the year (Jan, Feb, Mar, Apr, etc) and these workbooks have the data needed to fill the master sheet. How is this possible? Or is it not?
Master sheet.xlsx
-Contains item number
-Purchase Date
-Sell Date
-Purchase Price
-Sell Price
-Profit Price
The 12 workbooks are the 12 months out of the year, which are invoices.
- Contain the data needed in the master sheet such as sell date, sold price, and profit.
The reason I would like to keep the 12 invoices as workbooks instead of worksheets in 1 big file, is due to the high capacity of item numbers each monthly invoice would have. For example (approximately 500 items in each workbook)
I have for hours and weeks, actually months, But I haven't found any sources on the internet, although I have seen the VLook Up how to's on youtube between 2 workbooks, but not the 12 I would like.
View 10 Replies
View Related
Apr 9, 2014
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies
View Related
Jul 9, 2012
I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.
View 1 Replies
View Related
May 28, 2014
I am trying to automatically transfer data from nonadjacent cells (C1, B5,B10,B16,B22,B28) from multiple workbooks in a masterworkbook folder from A2:F2. I am a novice at VBA. I am not able to copy as Range("C1,B5,B10,B16,B22,B28") and the way it currently is coded only the last copied range (B28) is pasted to the master workbook. The data pastes to A2 in the master workbook instead of F2 where I want it. I need copying the cells from the workbooks into row 2 in the master bookbook. Here is what I currently have:
Sub LoopThroughDirectory()
Dim MyFile As String
Dim erow
MyFile = Dir("C:ToolFolderWorkObjectives")
[Code].....
View 9 Replies
View Related
Aug 6, 2014
I have multiple excel files from which I would like to copy specific ranges to a master file. The row should add up to the previous rows. From this side I have no problems things work fine. The problem is to copy the header which remains the same data to the top of the master file. Currently the macro I use overwrite the first line of the master file. So I loose the date from one of the excel files.
View 3 Replies
View Related
Nov 14, 2008
Objective: use VB to copy the first sheet (tab) from every Excel file in a specific folder to a new sheet/tab (for each) in a master spreadsheet. I will then aggregate this data into a summary table.
Following the advice of an old thread (Access: VBA combining multiple excel files to 1 new sheet), one time for each file in the folder. So with three excel files in the folder, I get 3 new tabs in my master spreadsheet but all are copies of the first tab in the master spreadsheet.
I'm wondering if maybe the code, which was in a post from 5 years ago, needs to be "modernized" for Excel 2007. Thanks for any help.
This is the code I'm using:
Sub Combine()
Fpath = "C: emp2" ' change to suit your directory
Fname = Dir(FilePth & "*.xls")
Do While Fname <> ""
Workbooks.Open Fpath & Fname
Sheets(1).Copy After:=Workbooks("Master.xlsm").Sheets(Workbooks("Master.xlsm").Sheets.Count)
Workbooks(Fname).Close SaveChanges:=False
Fname = Dir
Loop
End Sub
View 9 Replies
View Related
Apr 16, 2014
I have created timesheets for employees that work in our shop. Our company manufactures products for different industries, such as mining, wind power generation, general industrial applications, and so forth. I modified some time sheet templates I found for excel to accommodate our company's actions. Each employee has their own workbook, in which the months are separated into different worksheets. Each sheet is divided further into weeks and in each weekly section the areas of information are divided as follows:
A / B / C / D / E / F / G / H / I / J / K / L / M
Work Sector / Workshop or Fieldservice / Scope of Work / Job # / Reg or OT / Mon / Tue / Wed / Thu / Fri / Sat / Sun / Total
There are 7 workbooks (one for each employee), each with 12 sheets (one for each month). I want to create a master sheet that will pull information from everyone's timesheet if they worked on a particular job. In other words, I would like to type a job number into a cell, then have excel look through everyone's timesheets and pull over only the rows of information that contain that job number
View 12 Replies
View Related
Jun 27, 2013
VBA Macro to work through a worksheet that consist of static data (tab 4) cost centres and to populate a new work book per cost centre consisting of three tabs for every cost centre found in the static data.
The master Workbook has the following tabs:
Tab 1 is called travel and consist of column a which is the cost centre number (plus 14 other columns)
Tab 2 is called Mobile and consist of column a which is the cost centre number (plus 14 other columns)
Tab 3 is called Expenses. and consist of column a which is the cost centre number (plus 14 other columns)
Tab 4 Static Date column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns).
If no information found on a specific cost centre, the tab will include the headers and return the words "No transactions for this period"
Whilst splitting data into Tabs the workbooks should check against the Static Data table and include cost center description in Column B of each tab in the new workbook.
If master workbook consist of the following....
Tab 1 is called travel and consist of column 1 which is the cost centre number (plus 14 other columns), cost centres, 555,557,
Tab 2 is called Mobile column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns) cost centres, 555, 78689,
Tab 3 is called Expenses. column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns), cost centres, 555,
tab 4 Static Date - column 1 cost centre number and consist of column 1 which is the cost centre number (plus 14 other columns). cost centres, 555, 557,78689
It should output 3 workbooks by cost centre number.
One for 555, which consists of 3 tabs, travel, mobile and expenses.
A second for 557 which has 3 tabs travel, mobile and expenses, but only with data in the travel tab.
A third for 78689 which has 3 tabs travel, mobile and expenses, but only with data for mobile data.
The workbooks will be replicates of the contents within the tabs where column a wil be the cost centre plus 14 additional columns.
View 5 Replies
View Related
Dec 19, 2013
I have tried to write the below VBA to copy a specific cell to a specific workbook. I have set the folder path in B1 and listed the file names in column E4 onwards. E1 being the number of files in column E. I get a run-time error 91 "Object variable or With block variable not set" on Current File = ActiveWorkbook.name.
Sub UpdateParameters()
Dim CurrentFile As Workbook
Dim wbOpen As Workbook
[Code]....
View 4 Replies
View Related
Jul 12, 2014
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
View 4 Replies
View Related
Sep 17, 2009
I have multiple workbooks ( with unique names) under same folder. Each workbook has "Report-Corn" sheet.
I would like to copy cell "P15" from each (workbook-> report-corn -> P15) and paste to Master.xls workbook -> Sheet 1 one after another which is also located under same folder.
View 9 Replies
View Related
Aug 2, 2013
I have three source workbooks that needed to be consolidated into a master workbook pasting the data with values & formatting.
The Master workbook also contains 6 additional worksheets that link to the data pulled in from the source files.
My question is how do I write the code so the source files populate the master in a specific order.
For example, the 3 source files are named "Central" "NED" and "WEST" and I need them to populate the master workbook in that order.
This is the code I am using to consolidate the data:
Option Explicit
Sub ConsolidateSheetsFromWorkbooks()
'Author: Jennifer Starr
'Date: 7/12/2013
'Summary: Open all files in a folder and merge data (stacked) on all
[Code] .....
View 1 Replies
View Related
Nov 19, 2012
I have a database from which I extract 5 different excel files. For arguments sake, they are called File 1, File 2 etc. Each of these workbooks will have a sheet called 'Raw Data'. These will all be save in the one directory, C:Data, for example.
I am after a macro that can copy all the data from each of the workbooks, on the sheets called 'Raw Data, however the data in each of the workbooks will vary in length and width.
The workbook which I want them copied to is called "Template" and I would like the copied data onto separate sheets in this file. If possible I would like them copied to already named sheets, for example in the "Template" file, sheets may be called "Raw Data1", "Raw Data2" etc.
View 6 Replies
View Related
Jun 3, 2014
I found a great code for copying worksheets from multiple workbooks (up to 2000 workbooks) into one new workbook. It works perfectly for 99% of the copying/merging that i do. The only issue with the code is that it only copies from the active sheet in the other workbooks. I need it to copy from a specific sheet ("Travel") in all of the workbooks that i select. I've tried many ways to edit the code to change the activesheet to "Travel" but i cannot get it to work.
Option Explicit Sub CombineDataFiles() Dim DataBook As Workbook, OutBook As Workbook Dim DataSheet As Worksheet, OutSheet As Worksheet Dim TargetFiles As FileDialog Dim MaxNumberFiles As Long, FileIdx As Long, _ LastDataRow As Long, LastDataCol As Long,
[Code]....
View 5 Replies
View Related
Jul 4, 2008
I need to copy multiple workbooks of similar format into one new workbook called "ZZZ.xls". I have developed the below code but I got an error :
Run-time error '1004':
Paste method of worksheet class failed.
Sub create_intransit_stock_FOR_RCP()
Dim Wk As Workbook
Dim FileToOpen As Variant, i, j, k As Integer
Dim NewWBName As String, NewWBName1 As Workbook
Dim OutFileName As String
OutFileName = "C:My_DataZZ.xls"
'On Error Resume Next
FileToOpen = Application.GetOpenFilename(FileFilter:="Microsoft excel files (*.xls), *.xls", Title:="Press CTRL Key to Select Multiple Files", MultiSelect:=True)
If IsArray(FileToOpen) Then
For i = LBound(FileToOpen) To UBound(FileToOpen)..............
View 9 Replies
View Related
Aug 18, 2006
I have 600+ variations of the same workbook. Contained within each workbook is a worksheet, from which I need to copy and paste a range of cells into one "master" workbook. For example, in workbook 1 I need to copy rows 2:5 and paste that into the master workbook in cells 2:5. Then I need to open workbook 2, copy rows 2:5 and paste them into the master workbook starting at row 6. I have fumbled my way through everything except the pasting part into the Master workbook.
View 9 Replies
View Related
Apr 2, 2014
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
View 12 Replies
View Related
Aug 13, 2014
I'm trying to set up an excel that will allow me to gather data from multiple workbooks and get it into one master worksheet. All of the worksheets are formatted the same way (See below)
Employee Last Name
Employee First Name
Employee Position
Employee Series Number
Departing City
Departing State
Attended Pilot Training?
We don't have the data yet so the idea is to paste this information into their perspective worksheets and then have them automatically populate into the master tab.
View 1 Replies
View Related
Aug 22, 2012
I about 150 different workbooks that I need to copy the cell data from the first sheet to a second workbook
The code is running all the way through to the "Clear values?" pop-up box, BUT nothing is actually being pasted into my second workbook
Sub TransferData()
Dim wkb As Workbook, wks As Worksheet, LastRow As Long
Dim FilePath As String, FileName As String
Dim ws As Worksheet, blnOpened As Boolean
'Change these variables as desired...
FilePath = "C:UsersPipeline2DesktopOveralnd Focal Points" 'change path here
[code]....
View 2 Replies
View Related
Dec 14, 2011
I have got a file with a lot of different workbooks
What i want to do, is open each one of them, copy a range of cells, for example E4:E15, then open the "master" workbook, look in row 4 which cell is empty and then paste the data there
i know how to copy-paste from one workbook to another, i am just not sure how to do it for more than one workbook.
View 2 Replies
View Related
Jun 10, 2014
I have a folder which contains multiple 'Customer' workbooks (example attachment 'Customer_001'). Each workbook has a filename unique to the customer (Customer_001, Customer_002, Customer_117 etc). The workbooks contain a single sheet with customer information and answers to questions. These 'Customer' workbooks are automatically saved into a folder once the customer completes a Userform and clicks 'save'. Potentially, there could be 100's of customers' workbooks saved in the folder, each with their own unique filename.
I also have a 'Master' sheet saved in a different folder (example attachment 'Master'). The 'Master' workbook has multiple sheets named 'Department 1' and 'Department 2'. The purpose of the master sheet is to consolidate all information from the individual customers' workbooks.
Specifically, I would like a command button on the 'Master' workbook to execute the following tasks...
1. Copy the data from range A3:F3 from each of the 'Customer' workbooks held in the folder.
2. Paste the data into the next blank row on the 'Department 1' sheet in the 'Master' workbook.
3. Copy the data from range A7:F7 from each of the 'Customer' workbooks held in the folder.
4. Paste the data into the next blank row on the 'Department 2' sheet in the 'Master' workbook.
5. Save the 'Master' workbook.
6. Delete all 'Customer' workbooks in the folder.
View 3 Replies
View Related
May 25, 2009
I had to copy data from child woekbooks (*.xls) and paste it to the master workbook with same page to page every time when a macro is executed i had done the copy and paste part
But I'm Facing the problem in which i had to deal with
Validations as on both master and child sheet validation (column based combo box is activated )
one is worktype
2ns is time type
i jst had to copy data to the master macro works perfectly fine but the problem is that a msg box appears which signifies that i had to change the name (version ) for both types when i click yes 2 times it pastes the data
I'm attaching my macro as well as pic of that msg box with this attachment
View 6 Replies
View Related
