For all worksheets in the activeworkbook,
i want to automatically copy a formula (=INDEX(KEBSIDF20080925_26!$A$3:$A$10000,MATCH(A4,KEBSIDF20080925_26!$A$3:$A$10000,),1)
to a target cell (D4). Each worksheet has the same headers.
I'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.
View 4 Replies View RelatedLet's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies View Relatedlook for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I've been working on creating this line of script but keep getting errors. I need the first row on the first worksheet to copy to the remaining worksheets on the first row. Literally row 1 from the first sheet will pasted in row 1 of the remaining sheets. Here's the final script that I tried.
View 2 Replies View Relatedshow where the tender ranks against a set of criteriashare with me the vba code that will loop thru each worksheet of ¡°Workbook A¡± and copy the LAST row of each sheet and paste it into the next available row in the matching worksheet of ¡°Workbook B¡±.
View 2 Replies View RelatedI am trying to copy data out of certain sheets to another workbook Some worksheets in the source workbook should be skipped. Everything works, except the sheets I would like to skip are not skipped Does anyone see anything in the code that would cause the sheets not to be skipped?
Sub comp_GetData()
Dim wbBook As Workbook
Dim wbOpen As Workbook
Dim wsData As Worksheet
Dim sht As Worksheet
Dim FSO As Object
Dim i As Long
Dim sFolder As String
Dim fldr As Object
Dim Folder As Object
Dim file As Object
Dim Files As Object
Dim blnMatched As Boolean
Dim lngIndex As Long
With Application
. ScreenUpdating = False
.Calculation = xlCalculationManual
.DisplayAlerts = False
End With
'/File_Folder
Set FSO = CreateObject("Scripting.FileSystemObject")
sFolder = "C:DataAppleBudget 2007Client"......................
I would like to copy several cells in a Summary sheet. I have 20 worksheets, corresponding to the information of 20 companies, with exactly the same format. They have obviously different data/figures.
I want to summarize some key figures into the summary sheet. I have already created the links manually and pasted all of them in a row for the first company. Now I would like to copy the same references from the other companies. Even if the cells are blocked with the dollar, excel will not go across the different worksheets to copy the same cells.
How can I do it? Certainly there is an easier way than to do 19* 70= 1330 clicks manually.
I have a workbook containing several worksheets I want to copy to a workbook of their own and save under a specific name/password through a macro.
However, I have five difficulties:
1) I want to new workbook to contain only 1 worksheet. So, only the worksheet copied from the original workbook, and no other worksheets.
2) I want to be able to manually select the destination file for the copied workbook, however. This should be the same file for all workbooks.
3) I want the data copied from original worksheet to be ‘pasted as value’ only, so no formulas in the new workbook.
4) I want the new workbook to be read-only. Therefore I want the workbook to be /locked and password protected. So, the password should be only for altering cells, not for opening the workbook. See also point below.
5) Regarding the naming and passwording part I have made a matrix table in a worksheet named: “Rekeningen” (this worksheet is in the original workbook). This table contains three columns:
Column A, cells 40:65, contains the names of the worksheets I want to copy
Column B, cells 40:65, contains the names of the new workbooks
Column C, cells 40:65, contains the passwords of the new workbooks
So for example ....
I need to copy data from two ore more worksheets with specified name in a column.
Input data:
-name of the worksheets to be copied in column "H" from sheet "final"
-diferent number in the worksheets in column "F" and "G"
Outpt data:
-I need to copy data from some worksheets(column F and G) in "final" worksheet (column A and B). But I need to copy data only from the worksheets with the name in column "H" of "final" worsksheet.
I have 20+ tabs that need to be copied monthly. That also means 40+ name changes (when you copy you get "copy of...". I am trying to get this down so I am hoping for the better. Anyways what the macro needs to do is copy the first x amount (lets say 3 for this demo) tabs (true full copy, formulas and all)
(YYYYMM Name) -- This is the setup, it is not current month, I do not mind inputting the YYYYMM if need be)
201010 Tab 1
201010 Tab 2
201010 Tab 3
To
201011 Tab 1
201011 Tab 2
201011 Tab 3
Then a popup at asks current reporting date (again this is not current date) for these new tabs only (all these tabs have a date field that needs to be updated) So I assume this will have to store an array of the tabs created. Date WILL go in the same row/column in all tabs.
Then copy paste values all prior months tabs to preserve the history in the old tabs
201010 Tab 1
201010 Tab 2
201010 Tab 3
Now 20+ tabs doing this for you can see how im about to lose my mind. I am stressing them to downsize this mess, so the X number would need to be a value i could mess with in code.
If it wants to just read for the tabs that start with the asked for or current YYYYMM that's fine with me. That way I don't have to input a number.
from an active workbook, I would like to open a new file "testfile" and copy two work sheets ("result1", "result2") into the new file and then close it and continue working in the active workbook. seems simple but i keep getting errors.
View 2 Replies View RelatedI need a macro to copy the data from A3:B3 to last row in sheet2 and paste the same in last empty row in col.A of sheet3.
View 2 Replies View RelatedI'd like to copy and paste data between workbooks.....
View 10 Replies View RelatedI have a workbook with 58 worksheets in it... each worksheets is name T01, T02....T58, I need to copy a range from different worksheets...
I don't need all the worksheets in Master.xls I only need some of the worksheets...
for example .....
I have been given an assignment to copy the contents the contents from different sheets to one single sheet with following constraints. example: copy contents from say N sheets (same cell) to A sheet named XYZ to say A1,B1,C1..N respectively.
Sheet1(A9) to XYZ(B1)
Sheet2(A9) to XYZ(C1)
Sheet3(A9) to XYZ(D1)
Sheet4(A9) to XYZ(E1)
Sheet5(A9) to XYZ(F1)
Sheet1(A11) to XYZ(B2)
Sheet2(A11) to XYZ(C2)
Sheet3(A11) to XYZ(D2)
Sheet4(A11) to XYZ(E2)
Sheet5(A11) to XYZ(F2)
Sub X()
Dim lCnt As Long
' Upper bound and lower bound for no. of sheets
For lcount2 = 1 To 3
lcnt = lcnt +1
Sheets(lcount2).Activate
If Sheets(lcount2).Range("A9") = "Distinction" Then
Select Case (lCnt)
Case 1:.................
I have the following code that I would like to use to create generic estimates for common jobs that happen all the time.
Sub CREATEESTIMATE()
Dim wsEst As Worksheet
Dim wsList As Worksheet
Dim wsData As Worksheet
Dim smallrng As Range
Dim destrng As Range
Set wsEst = Worksheets("Estimate")
Set wsData = Worksheets("Brk-oil-44kv-data")
Set wsList = Worksheets("Estimate List")
lngMax = wsList.Cells(Rows.Count, 1).End(xlUp).Row
For Each Cell In wsList.Range("F2:F" & lngMax)
If Cell.Value = "BR-O-44-RR" Then
Sheets("Estimate").Activate.......................
1) When I run the macro the data that needs to be paste under the Station Maintenance rows does not appear. It just pastes the first section (6 rows of 72 rows).
2) The Task # does not renumber automatically - but with the SAME code it renumbers properly for the CMS Task #.
3) Under CMS it copies everything properly except for data that should be in column I - the data is on the data sheet "Brk-oil-44kv-data".
Assume 2 Workbooks - the Active one and "Book2".
I mannaged to copy ALL the sheets from the ActiveWorkBook to "Book2" with the following code - but as you can see the code copies each of them AFTER the last sheet in "Book2".
Sub Copy_Sheets()
' Copy All sheets from ActiveWorkbook to "Book2.xls"
For Each SH In ActiveWorkbook.Sheets
SH.Copy After:=Workbooks("Book2").Sheets(Workbooks("Book2").Sheets.Count)
Next
End Sub
How can I copy them to "BEFORE", lets say Sheet(1) in "Book2" ?
I tried to change the SH.Copy command to somthing that sounds logic to me, such as:
SH.Copy Before:=Workbooks("Book2.xls").Sheets(1)
but got the: "Run-time error '9' - Subscript out of range".
Is it Possible to copy my Header Row / Range of Cells to all my Worksheets (at the same location) in one Go.
View 5 Replies View RelatedAssistance w/ this line of
If Not isempty sheets("PCCombined_FF"). cells("I4:I"&lrow) Then sheets("Discounts").cells("I4:I"&Lrow).value_
=sheets("PCCombined_FF").cells("I4:I"&lrow).value
Function for code is to look at cells in col. I on the sheet "PCCombined_FF", If the value is not blank then that value will populate the next open cell on sheet "Discounts" in col. B beginning in row 2.
I am a novice in VBA. I want to copy a range of value from Sheet1 and paste 1st value in the range to Sheet2, 2nd value in Sheet3, 3rd value in Sheet4 and so on.
Ex
Sheet 1 has a value in cell
B1 : C02
B2: C03
B3: D01
B4: D03
B5: D04
and so on....
I want C02 to be pasted in Sheet 2, cell B1; C03 pasted in Sheet 3, cell B1; D01 pasted in Sheet 4, cell B1...and so on.
I want to copy all 25 worksheets to a new file and don't know how to do this easily.
View 2 Replies View RelatedI have nearly 200 worksheet in a same workbook. Sheet 1 is the index sheet. Now I need to copy cell values from A1:C1 of all 200 sheets to A1:C1 , A2:C2 , A3:C3...A200:C200 of index sheet. How can I do it automate?
View 6 Replies View RelatedBasically, I have six worksheets where I have, on two different columns each,
the code, the quantity, the shelf
Where it is stored.
What I have been asked for is: given the shelf, to have got back all the codes and quantity that there are in this shelf.
My Idea is: in a sheet called <<initial>>, create a cell where I write the value of the shelf (this value in a text).
Then, with a VB procedure, start activating first worksheet, start reading the first column.
if the shelf value corresponds to the required shelf, then activate a sheets called "Results" and write there all the value corresponding to code and quantity.
Then, when ended the column, I would move to the second column. Once ended the second column I would activate the second worksheet.
But I am having some problems since the beginning, since I have problems in reading the value of the shelf column.
I am attaching how I have started to wrote the procedure : [Code] .....
Why I can read the value of the cell ?
I try to generate sheet's with the name from a column (eg. "subtotal 1", "subtotal 2", s.o) and to copy data to this worksheets.
I attach an example: from sheet Database i want to generate sheet's and to copy some information.
I have 16 proposals that are either hidden or visible in a proposal generator. I need to be able to copy only the visible worksheets over to a new workbook that uses a name from a cell inside the proposal generator. Then a save as prompt to force the user to save the file wherever they choose.
View 14 Replies View RelatedI have two worksheets (sheet1(1687 rows), sheet2(767 rows)). Both have part numbers in Column A
I want to be able to search Column A for duplicates found in the other worksheet. When it finds those duplicates, iw oudl like for the Part Number(columnA) and the cost(column D) to be pasted onto a third worksheet (sheet 3)
I have found lots of similar things out there, but nothing that does what I want.
I will do this Each Monday morning. I am ok with VB but what takes me 3 weeks sometimes takes you guys 10 min.
I'd like to copy/paste from different spreadsheets. The place it will be pasted is specific.
Sub Family1()
Range("A2").Value
Sheets("Black Market").Select
Range("C3:C35").Copy
Sheets("Profiles").Select
Range("B2").PasteSpecial
Sheets("Real Estate").Select
Range("E3:E30").Copy
Sheets("Profiles").PasteSpecial
End Sub
I have workbook that expands or shrinks in number of worksheets each time and I need to gather information from each worksheet to compile a "total" spreadsheet. The location of the cells to be copied in each worksheet vary however it is always in the same column. Managed to find a macro that will collect the information if it is located in the same cell, across all worksheets but did not manage to find something that will conditionaly copy.
Need code, that will search based on text that will be found in the worksheets and then copy the values from the column next to it (same row) to the "total" worksheet. If any of the text that is to be searched in the worksheet does not exist, then it should leave the cell "blank" in the "total". I have attached a workbook of with the example of the worksheets that I have and the result that I want to have at the end, in the "total" worksheet.