from an active workbook, I would like to open a new file "testfile" and copy two work sheets ("result1", "result2") into the new file and then close it and continue working in the active workbook. seems simple but i keep getting errors.
View 2 Replies
I want to copy all 25 worksheets to a new file and don't know how to do this easily.
View 2 Replies View RelatedI have a file that opens a number of files from a source directory (which is identified by the User at run-time) & merges the source data into various worksheets (which all works fine)
Now what I'd like to be able to do is to be able to (silently) save multiple worksheets back to separate files in the original directory based on each worksheet name - e.g:
"Sheet1" and "Control" Sheet" are saved to SourceDirectorySheet1.xlsm
"Sheet2" and "Control" Sheet" are saved to SourceDirectorySheet2.xlsm
"Sheet3" and "Control" Sheet" are saved to SourceDirectorySheet3.xlsm
...
"Sheetn" and "Control" Sheet" are saved to SourceDirectorySheetn.xlsm
(Note that "Control Sheet" also contains Command Buttons & VBA which I'd like to preserve)
How do I create code that will copy and paste 30 rows of data
Copy from filename "Record1", worksheet name "CA3M", in column A and B, and Paste data in filename "Record2", worksheet name "CA3M"
- Column A 30 rows of data paste into A20:A49 of the new file and worksheet
- Column B 30 rows of data paste into E20:E49 of the new file and worksheet, prior to pasting these results remove all dashes "-" eg.0-0-1 = 001
The location of the 30 rows of data to be copied changes, so the code should always look for the following information in the row before and after the 30 rows to copy in column A and B:
- Find the 30 rows of data in Column A and B where the first row immediately follows the row with the cell result "Account Date" and the last row is immediately before the row with the cell result "Previous Page Page".
Also, I will probably have to update the code to repeat this function for several other worksheets within these 2 files after my database is completely built.
I have a workbook that contains worksheets. They are listed as follows:
Sheet 1ABCDEFG
In cells A1 - A49 I have text. What I would like to do is to have a macro that I can run that will basically copy and save new workbooks with sheets A - G copied over and have the new workbook saved with the file name that I have denoted in cells A1 - A49 on Sheet 1. Also, the macro would ask me where I want to save the new Workbooks.
For example, if this were Sheet 1, Column A then the cells below would be the saved name of the new workbooks and the new workbooks would have Sheets A - G in themRed
Blue
Purple
Black
White
Yellow
Orange
Green
Gray
Brown
One more piece of information, the file that is being copied and saved is large (~80MB). If there is a macro that would allow me to simply "save as' the workbook and the Saved Workbooks would be named using the data in Sheet 1, that would work as well in case copying, pasting, then saving may take more time
Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
I'm working on the following
Workbooks.Open Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-" & Ucase(Format(DateAdd("y", 0, Date)), "YYYY-MM-DD")&".XLS"
ChDir "D:CommondataIBMmain"
ActiveWorkbook.SaveAs Filename:= _
"D:CommondataIBMmainBRANCHBURG-PRODUCTS-BOM-ALUMINUM-UPDATE-NAFTA.XLS", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
ActiveWindow.Close
Date: 2009-06-03
What I'm trying too do is open a file, make an exact copy and save it under a new file name.
My problem is in the date formula the day is not always the same. In the sample case it's 03 at other times the day will change.
is there a way too get this too work irregardles of what the day might be?
This is a sample of the data with which I am working. I know that a macro can do what I need, but I am only versed in Excel formulas and not that much programming. I need to be able to first sort the data by Column C ("Element Type"), then by Columns E, F, G ("Year", "Month", "Day"). Then, I need to be able to copy all rows that have the same "Element Type" and "Year" to a new file, using the same header from the original spreadsheet on each new spreadsheet - doing this multiple times until the end of the file is reached.
Ideally, the new files would have a strict naming convention: XXXXXX-ZZZZ (YYYY).xls, where the X's are the value of the "COOP Station ID" in Column A, the Z's are the "Element Type" from Column C, and the Y's are the "Year" from Column E. If this theoretical macro were run with the Sample Data file I provided, it should result in the creation of five new workbooks. Is there a way to write a macro to do this, or at least something similar
I have csv files auto generated (with date stamp in name) and saved in a specific folder everyday. I need to find a macro that will copy the row(s) every day and add to the next empty row in the master excel file. Some days the csv file may have a single row of data and on some other days it may have multiple rows of data to copy and paste.
View 4 Replies View RelatedI have certain excel file that i want to be able to write a macro in order for it to extract certain information from certain cells on different sheet. In other words, i want cell A2 from each of the three different worksheet i have under different files. And have those data automatically update a master excel or access file whichever might be easier.
View 4 Replies View RelatedBelow is the current code I have for File Copy before the workbook closes. This file will be distributed all over and obviously will not have the same old path and new path locations as I have in my code also will not have the same file name. Is there anyway to still perform the file copy without knowing the old path and file name and possibly have message box pop up to ask the copy to location and use that in the new path string?
Sub Macro1()
Dim fs As Object
Dim oldPath As String, newPath As String
oldPath = "I:EXLDATAMC Daily" '<---Where the file is currently located
newPath = "H:South RegionOrlando Mail Services2008DI" 'Since the super shared drive is super slow we will just copy and replace this file each time before we close and of course after we save
Set fs = CreateObject("Scripting.FileSystemObject")
fs.CopyFile oldPath & "" & "OrlandoMail.xls", newPath & "" & "OrlandoMail.xls"
Set fs = Nothing
End Sub
I already have code that I believe is supposed to do what I'm trying to accomplish. However, it doesn't fully work. The Macro is below:
VB:
Workbooks.Open Filename:="C:Documents and Settingsplp138DesktopExample 1.xls"
On Error Resume Next
With Workbooks("Example 2.xls")[code]....
Basically, what I'm trying to accomplish is to have a certain range from one file copied, and pasted in the next available (empty) row of another file. While debugging I see that everything is working except for the actual pasting.
I just found a code to copy file path and file contents. However it is copying folder path and folder contents.here is my requirement.I will specify a path, macro has to copy that file name in a particular cell, then it has to copy all its contents.
ex:
file name 1 has 3 sub files in it, file name 2 has 2 sub files in it--
column AColumn B
file name1file contents
file name1file contents
file name1file contents
file name2file contents
file name2file contents
And also i have extend this macro to write a index function. i will tell u about this. but first i need above thing I researched but I didn't find.
I need file name in a column then i need file contents in b column.
if a file has 10 file contents in a file then that file name should come 10 times in a column, and in b column all its contents.
Is it possible w/ some vba code to copy the names of files, either from a search or a specific directory to an Excel Worksheet?
View 9 Replies View RelatedIs there an easy way to automatically copy data from 1 Excel spreadsheet to another when the data is slightly out of order? Currently an admin copies and pastes from file 1 to file 2 manually. There are approximately 800 names to copy. It would be ideal to type a command or press a key and have file 2 updated automatically. Is there a feasible way to accomplish this without spending a lot of money or time?
file 1 file 2
john 100 john 100
june 200 lance 50
marie 150 june 75
stan 100 marie 125
phone 50 stan 200
hold 25
In the example above, if lance doesn't appear in file 1 his amount doesn't get copied and his 50 remains the same. The amounts do not get added, just pasted over from file 1 to file 2 with the days sales results. Only the names on file 2 get pasted over. Phone and hold amounts in file 1 are ignored.
my formula is as follows: =(VLOOKUP(A7,'[Monthly AR Analysis - Feb09.xls]AR - Current'!$A$1:$I$153,8,FALSE)). I will be using this for formula on about 15 different worksheets ... my issue is the file name changes every month and currently I have to go in and do a find and replace, I would like to have one main page where I could change the file name month and it will change all the rest.
ie: Monthly AR Analysis - Feb09.xls next month changes to Monthly AR Analysis - Mar09.xls .... So basically each month I want it to pick up the new file that has been saved with the new name. So what I would want is to be able to have a cell that I could change the Feb09 to Mar09 and then it would do the same to all the worksheets. I attempted to use CONCATENATE to change file name and it worked but will not work within the Vlookup.
I have a user that needs to compare MSExcel files with a mass number of worksheets within the file/files. Is there anything to compare Excel files and to print out the compared results?
View 3 Replies View RelatedHow do you get a quick report of all of the worksheets in a given file?
Is there functionality in Excel that would provide this? Or a simple macro?
I inherited a file w/ approx. 50 tabs and I'd like to print out the list of all the worksheets so I can create a checklist of tasks I need to do for each worksheet.
I did this macro which formats five worksheets in the same file. I saved this macro as a PERSONAL.XLS file. Last night when i open new files to re-run this macro it was working fine excep one of the worksheets wasnt formatting properly....the macro on this sheet wasnt working for some reason.
Then this morning when i opened new files and tried the macros again it wouldnt work at all. And there is no reacord of them I did five of them and they are all gone! I saved them so why did they disappear! I thought that when you saved a macro as a PERSONAL file that you could open new files and re-run that macro again and again????
I have an excel file with few worksheets. From the 2nd to the 22nd the structure of the worksheets is the same. For each of them I have to add the same column of data. How do i do this?
View 5 Replies View RelatedI need to look at the values in Column B Sheet1 and compare to Values in Column K in Sheet2. If there is a match, I want to put "Cashed" in the cell adjacent to the cell in Sheet1.
View 4 Replies View RelatedI am trying to write this code where I need to save an excel workbook with a number of tabs to 1 text file with a name of users choice.
I am able to do this if there is a separate file for every worksheet within the workbook but not if we have the same text file to append every time.
adapt the code write by TURBO at [URL]....
I'm trying to add more sheets to consolidate the data from different worksheets
What I want it to do is to consolidate each worksheet in every excel file into one workbook that will have the same worksheet structures as the child files
If every excel file has {Sheet1,Sheet2,Sheet3} structure The Master Consolidated workbook should have the same structure but with all the date copied from the child excel files.
Attache it's also an example
Test xls files2.zip
I am using MS Excel 2010.
What I want to Hide two worksheets and leave one worksheet open when I close out the file.
ws TOC will remain open when closing out the file
ws Rqmts will hide when closing out the file
ws Planning will hide when closing out the file
I have an excel file with multiple worksheets that contain data that needs to be collated
There are a # of different product #s on all spreadsheets I need a total qty for each product # by calculating the qty of each style # (ie how many I1 across all sheets?)
Its 1pm now and need to calculate all by 2pm!
After using VBA code to save multiple workbooks into single workbook the file hangs (states not responding) - I uninstalled 32 bit version and installed 64 bit, no difference.
Each worksheet has look up tables, formulas and graphing.
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
I've been working on creating this line of script but keep getting errors. I need the first row on the first worksheet to copy to the remaining worksheets on the first row. Literally row 1 from the first sheet will pasted in row 1 of the remaining sheets. Here's the final script that I tried.
View 2 Replies View Relatedshow where the tender ranks against a set of criteriashare with me the vba code that will loop thru each worksheet of ¡°Workbook A¡± and copy the LAST row of each sheet and paste it into the next available row in the matching worksheet of ¡°Workbook B¡±.
View 2 Replies View RelatedI am trying to copy data out of certain sheets to another workbook Some worksheets in the source workbook should be skipped. Everything works, except the sheets I would like to skip are not skipped Does anyone see anything in the code that would cause the sheets not to be skipped?
Sub comp_GetData()
Dim wbBook As Workbook
Dim wbOpen As Workbook
Dim wsData As Worksheet
Dim sht As Worksheet
Dim FSO As Object
Dim i As Long
Dim sFolder As String
Dim fldr As Object
Dim Folder As Object
Dim file As Object
Dim Files As Object
Dim blnMatched As Boolean
Dim lngIndex As Long
With Application
. ScreenUpdating = False
.Calculation = xlCalculationManual
.DisplayAlerts = False
End With
'/File_Folder
Set FSO = CreateObject("Scripting.FileSystemObject")
sFolder = "C:DataAppleBudget 2007Client"......................
